• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.243-274
• /
• 2013

To investigate the research state and characteristics of dinoflagellate cyst along the Korean coastal waters, this work analyzed 45 studies conducted in the Korean coasts and basin, the south of Jeju, East China Sea including some part of the Yellow Sea. It was found that the research on dinoflagellate cyst began in the later half of the 1980s in Korea, and that the research areas focused on eutrophied regions where a red tide occurred or on the seas where coastal development occurred. In other words, no research on the East Sea was found. In terms of research contents, there were various studies on analysis of cyst assemblage, tracking of the changes in marine environment like process of eutrophication, roles as a seed population in occurrence of a red tide, creation of cyst by use of sediment trip and tracking of its changes, morphological changes by the change of pH concentration in the hypoxia zone of eutrophied region, germination of a specific species, and other international-level studies. Species composition and cell density also varied in the Korean coastal waters. However, much research on dinoflagellate cyst in Korea is not systematic, and is fragmentary and individual and hencesuffers from great limitations. The research results so far have focused only on specific regions, and sporadic research had been conducted by specific research groups. Dinoflagellate cyst of surface sediments represents the accumulation index of pelagic environment in the sea and is a useful index to understand the marine environment efficiently. In conclusion, Korea requires organized human resources and collaborative research on dinoflagellate cyst which in turn should be considered as a component of marine ecosystem and as an essential aspect of marine biology.

• Ocean and Polar Research
• /
• v.46 no.1
• /
• pp.31-42
• /
• 2024

Due to physical processes varying in space and time, regional sea-level rise (SLR) significantly deviates from the global mean. Thus, understanding and quantifying the contribution of each process to regional sea-level change is crucial to prevent low-lying inundation in preparation for future ocean conditions. In this study, we assessed to what degree sterodynamic (SD) effects (i.e., density-driven steric expansion and mass redistribution due to ocean circulation), contemporary mass redistribution (CMR), and glacial isostatic adjustment (GIA) contribute relative sea-level rise around the Korean coast from 1993 to 2018, with independent observations and reanalysis datasets. The assessment showed that the tide gauge-observed SLR trend can be explained by the sum of each component at 16 of 19 locations. The major contributors to relative SLR are SD effects of 2.03±0.27 mm/yr and CMR components of 1.31±0.05 mm/yr, while GIA drives sea-level decreasing of -0.27±0.15 mm/yr on the Korean coast. It was also found that the spatial deviations of SLR are primarily caused by the SD effects. In addition, the evaluation of vertical land motion (VLM) based on altimetry and tide gauge indicates that most tide gauge locations have experienced uplift during at least altimetry period, whereas Wido station has experienced particularly high rate of subsidence that contributed to the SLR acceleration. Further examination of the impact of earth deformation due to CMR, GIA, and local process on the VLM trends demonstrated that the GIA and CMR contribute to land uplift with the average of 0.35±0.15 mm/yr and 0.17±0.05 mm/yr, respectively. On the other hand, the local processes like groundwater depletion and sediment compaction showed a wide range of variability, from -1.61 to 0.58 mm/yr, indicating a significant contribution to regional differences in vertical land motion.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.3
• /
• pp.289-295
• /
• 2008

We studied the difference between the clay mineral content in the bulk marine sediments (absolute clay mineral composition) and clay mineral content only in total clay minerals (relative clay mineral composition) of the Yellow Sea marine sediments, and correlated the relationship between their distribution patterns. We used 56 Yellow Sea Surface sediments collected at the second cruise in 2001 of KORDI, and determined the absolute mineral composition using the quantitative X-ray diffraction analysis. Yellow Sea surface sediments consist of primary rock forming minerals including quartz (average 44.7%), plagioclase (15.9%), alkali feldspar (10.0%), hornblende (2.8%) together with clay minerals (illite 15.3%, chlorite 2.6% and kaolinite 1%) and carbonates (calcite 1.7%, aragonite 0.6%). Absolute clay mineral contents are very high in the region extending from the southeast of Sandong Peninsula to the southwest of Jeju Island. In contrast, it is very low along the margin of the Yellow Sea. Such distribution patterns of absolute clay mineral content are very similar to those of fine-grained sediments in the study area. The average relative clay mineral composition of illite, chlorite, and kaolinite is respectively 80.3%, 14.9% and 4.8%. The distribution pattern of relative mineral composition shows very different phenomenon when compared with those of absolute mineral composition, and also do not exhibit any positive relationship with that of fine-grained sediments in which clay mineral composition is abundant. Therefore, we suggest that the relative clay mineral compositions and their distribution patterns must be used very carefully when interpreting the origin of sediment provenance.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.6
• /
• pp.567-573
• /
• 2011

We investigated the phylogenetic diversity of ammoniaoxidizing bacteria (AOB) in Yellow Sea continental shelf sediment by the cloning and sequencing of PCR-amplified amoA and 16S rRNA genes. Phylogenetic analysis of the amoA-related clones revealed that the diversity of AOB was extremely low at the study site. The majority (92.7%) of amoA clones obtained belonged to a single cluster, environmental amoA cluster-3, the taxonomic position of which was previously unknown. Phylogenetic analysis on AOB-specific 16S rRNA gene sequences also demonstrated a very low diversity. All of the cloned 16S rRNA gene sequences comprised a single phylotype that belonged to the members of uncultured Nitrosospira cluster-1, suggesting that AOB belonging to the uncultured Nitrosospira cluster-1 could carry amoA sequences of environmental amoA cluster-3.

• 한국석유지질학회:학술대회논문집
• /
• spring
• /
• pp.56-65
• /
• 1998

Methane hydrate is ice-like solid compound consisting of mainly methane and water, and is stable under specific low temperature and high pressure conditions (HSZ : methane hydrate stability zone) that occurs in permafrost regions and in the ocean floor sediments. Geophysical survey was implemented in the southern area of the East Sea, and the HSZ of the study area is determined by the temperature, pressure and local heat flow obtained from the survey and well data. In the study area, methane hydrates could exist in the sediments below the water depths of about $300{\cal}m$, and the base of HSZ is about 600m beneath the seafloor. The acoustically blanking zones in the sediment and phenomena of gas seepage were detected from the seismic section. These sediments have the sufficient physical condition for the formation of methane hydrate. The temperature and pressure conditions were experimentally measured for the dissociation of methane and propane hydrates in Pure water. Equilibrium conditions of methane and propane hydrates were obtained in the pressure range up to 19050Kpa and 401.3Kpa. Under same temperature condition, propane hydrate was dissociated at lower pressure than that of methane hydrate.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.2
• /
• pp.123-130
• /
• 2018

The present study investigated the validity of an equilibrium shoreline empirical formula for real phenomena. Among three types of equilibrium shoreline formulas, Hsu's parabolic type static formula was employed, which is well-known and the most practical for shoreline estimation after coastal or harbor structure construction. The wave data observed at Maengbang beach and the CERC formula on longshore sediment transport were used in the present investigation. A comparison study was only conducted for the case of a shoreline change after the construction of a groyne. Reasonable agreement was seen between the observed wave data and the data obtained under a wave angle spreading function S = 3.5. However, significant changes were observed when S increased. Thus, careful application is required when using Hsu's formula.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.433-436
• /
• 2004

퇴적물의 음파전달속도에 크게 영향을 주는 온도변화에 따른 속도변화를 측정한 결과 기존에 제시되었던 값들보다 약간 낮은 값을 보여주었으나 큰 차이를 보이지는 않았다. 결국 해양퇴적물의 온도에 따른 속도 변화율은 해수에서의 변화율과 거의 유사한 것으로 보아 해양퇴적물의 경우 온도에 따른 속도 변화는 공극수의 음향특성에 크게 영향을 받는 것으로 보인다. 서로 다른 퇴적물 유형에 대하여 온도에 따른 속도변화를 조사한 결과도 절대값은 달라도 변화양상은 거의 유사한 것으로 나타났다.

• Journal of Environmental Science International
• /
• v.13 no.11
• /
• pp.993-1000
• /
• 2004

As an effort to clarify the ecosystem of Osaka Bay, a semi-enclosed coastal area under the influence of stratification, a three-dimensional water quality model with combination of the baroclinic flow model and primitive eco-system model was constructed. The proposed model succeeded in simulating the time-depending flow and density structure and the baroclinic residual currents in Osaka Bay. In present study, we tried to improve the model by taking account of the benthic-pelagic interaction and exchange of nutrients between sea bottom sediments and overlaying water. On vertical structure, the model consists of 13 layers of water and eight layers of sediments. Long-term prediction of water quality was conducted from 1964 to 1985. This period is characterized by rapid water pollution and its decrease by the cutoff reduction of COD and P flowed into Osaka Bay. By combining the sediment model into original model, the numerical model was confirmed to shows more reasonable results in simulating the water quality in Osaka Bay.

• Ocean Systems Engineering
• /
• v.1 no.3
• /
• pp.195-205
• /
• 2011

A method for calibrating a laser profiling system for seafloor micro-topography measurements is described. The system consists of a digital camera and an arrangement of six red lasers that are mounted as a unit on a remotely operated vehicle (ROV). The lasers project as parallel planes onto the seafloor, creating profiles of the local topography that are interpreted from the digital camera image. The goal of the calibration was to determine the plane equations for the six lasers relative to the camera. This was accomplished in two stages. First, distortions in the digital image were corrected using an interpolation method based on a virtual pinhole camera model. Then, the laser planes were determined according to their intersections with a calibration target. The position and orientation of the target were obtained by a registration process. The selection of the target shape and size was found to be critical to a successful calibration at sea, due to the limitations in the manoeuvrability of the ROV.

• Economic and Environmental Geology
• /
• v.11 no.2
• /
• pp.81-88
• /
• 1978

Nearly 300 bottom sediments and 20 box-cores were sampled from the Asan bay. The central portion of the Asan bay is covered by sand, slightly gravelly sand and gravelly muddy sand. Between the central and marginal zones gravelly mud and slightly gravelly sandy mud are characteristically distributed. The gravel population in the sediments seems to be originated from the rocky bottom on the area near the bay because the gravel is angular and composed of the schist and gneiss. The quartz/feldspar ratio is about 3/2. It is considered to be that the amount of feldspar in this bay is much higher than that of any other areas in the Yellow Sea. This is considerd to be comparatively short distance of transport ion of these sediment from the provenance.