• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2014

This study was carried out to investigate the range of distribution and vegetation structure of habitats of genus Cymbidium which is distributed in Jeju Island, Korea. This genus is distributed in tropical and subtropical Asia and North Australia. In Korea, there are six species [i. e. C. goeringii (Rchb. f.) Rchb. f., C. kanran Makino, C. lancifolium Blume var. aspdistrifolium (Fukuy.) S. S. Ying., C. macrorhizum Lindl., C. nagifolium Masam. and C. ensifolium L.], which were also distributed in Jeju Island. The habitats of this genus ranged between 16 meter and 574 meter above sea level in Jeju Island. C. macrorhizum had the broadest altitudinal range (16-574 meter above sea level), whereas C. ensifolium, C. nagifolium and C. lancifolium var. aspidistrifolium had the narrow altitudinal range. According to the classification analysis by TWINSPAN, the plant communities were divided into five groups of Castanopsis sieboldii community, Castanopsis sieboldii-Pinus thunbergii community, Pinus thunbergii-Quercus acutissima community, Pinus thunbergii community and Quercus glauca- Aphananthe aspera community. Three species, C. kanran, C. nagifolium, and C. ensifolium inhabited Castanopsis sieboldii community and C. lancifolium var. aspdistrifolium inhabited Castanopsis sieboldii-Pinus thunbergii community. C. macrorhizum inhabited Pinus thunbergii community, Pinus thunbergii-Quercus acutissima community and Quercus glauca-Aphananthe aspera community. C. goeringii inhabitated Castanopsis sieboldii-Pinus thunbergii community and Pinus thunbergii-Quercus acutissima community. The populations of the genus Cymbidium have been extremely decreased due to illegal collection in Jeju Island. Especially, the distribution range of C. kanran, C. nagifolium, and C. ensifolium was narrow and limited to evergreen broad-leaved forests, therefore, conservation plans are needed for the protection of these species.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.237-237
• /
• 2015

The district of Marlborough has had more than its share of river management projects over the past 150 years, each one uniquely affecting the geomorphology and flood hazard of the Wairau Plains. A major early project was to block the Opawa distributary channel at Conders Bend. The Opawa distributary channel took a third and more of Wairau River floodwaters and was a major increasing threat to Blenheim. The blocking of the Opawa required the Wairau and Lower Wairau rivers to carry greater flood flows more often. Consequently the Lower Wairau River was breaking out of its stopbanks approximately every seven years. The idea of diverting flood waters at Tuamarina by providing a direct diversion to the sea through the beach ridges was conceptualised back around the 1920s however, limits on resources and machinery meant the mission of excavating this diversion didn't become feasible until the 1960s. In 1964 a 10 m wide pilot channel was cut from the sea to Tuamarina with an initial capacity of $700m^3/s$. It was expected that floods would eventually scour this 'Wairau Diversion' to its design channel width of 150 m. This did take many more years than initially thought but after approximately 50 years with a little mechanical assistance the Wairau Diversion reached an adequate capacity. Using the power of the river to erode the channel out to its design width and depth was a brilliant idea that saved many thousands of dollars in construction costs and it is somewhat ironic that it is that very same concept that is now being used to deal with the aggradation problem that the Wairau Diversion has caused. The introduction of the Wairau Diversion did provide some flood relief to the lower reaches of the river but unfortunately as the Diversion channel was eroding and enlarging the Lower Wairau River was aggrading and reducing in capacity due to its inability to pass its sediment load with reduced flood flows. It is estimated that approximately $2,000,000m^3$ of sediment was deposited on the bed of the Lower Wairau River in the time between the Diversion's introduction in 1964 and 2010, raising the Lower Wairau's bed upwards of 1.5m in some locations. A numerical morphological model (MIKE-11 ST) was used to assess a number of options which led to the decision and resource consent to construct an erodible (fuse plug) bank at the head of the Wairau Diversion to divert more frequent scouring-flows ($+400m^3/s$)down the Lower Wairau River. Full control gates were ruled out on the grounds of expense. The initial construction of the erodible bank followed in late 2009 with the bank's level at the fuse location set to overtop and begin washing out at a combined Wairau flow of $1,400m^3/s$ which avoids berm flooding in the Lower Wairau. In the three years since the erodible bank was first constructed the Wairau River has sustained 14 events with recorded flows at Tuamarina above $1,000m^3/s$ and three of events in excess of $2,500m^3/s$. These freshes and floods have resulted in washout and rebuild of the erodible bank eight times with a combined rebuild expenditure of $80,000. Marlborough District Council's Rivers & Drainage Department maintains a regular monitoring program for the bed of the Lower Wairau River, which consists of recurrently surveying a series of standard cross sections and estimating the mean bed level (MBL) at each section as well as an overall MBL change over time. A survey was carried out just prior to the installation of the erodible bank and another survey was carried out earlier this year. The results from this latest survey show for the first time since construction of the Wairau Diversion the Lower Wairau River is enlarging. It is estimated that the entire bed of the Lower Wairau has eroded down by an overall average of 60 mm since the introduction of the erodible bank which equates to a total volume of $260,000m^3$. At a cost of $$0.30/m^3$ this represents excellent value compared to mechanical dredging which would likely be in excess of $$10/m^3$. This confirms that the idea of using the river to enlarge the channel is again working for the Wairau River system and that in time nature's "excavator" will provide a channel capacity that will continue to meet design requirements.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.4
• /
• pp.251-261
• /
• 2007

The wind-wave interaction around the Kyung-gi Bay, Korea, was studied using the observed data from ocean buoy at DeuckJeuck-Do from Jan. to Dec., 2005, and from waverider data at KeuckYeulBee-Do on Mar. 19-26 and May 23-28, 2005. Wind-driven surface waves and wave-driven wind speed decrease were estimated from the ocean buoy data, and the characteristics of wave spectrum response were also investigated from the waverider data for the wave developing and calm stages of sea surface, including the time series of spectrum pattern change, frequency trend of the maximum energy level and spectrum slope for the equilibrium state range. The wind speed difference between before and after considering the wave effect was about $2ms^{-1}$ (wind stress ${\sim}0.1Nm^{-2}$) for the wind speed range $5-10ms^{-1}$ and about $3ms^{-1}$ (wind stress ${\sim}0.4Nm^{-2}$) for the wind speed range $10-15ms^{-1}$. Correlation coefficient between wind and wave height was increased from 0.71 to 0.75 after the wave effect considered on the observed wind speed. When surface waves were generated by wind, the initial waves were short waves about 4-5 sec in period and become in gradual longer period waves about 9-10 sec. For the developed wave, the frequency of maximum energy was showed a constant value taking 6-7 hours to reach at the state. The spectrum slope for the equilibrium state range varied with an amplitude in the initial stage of wave developing, however it finally became a constant value 4.11. Linear correlation between the frictional velocity and wave spectrum for each frequency showed a trend of higher correlation coefficient at the frequency of the maximum energy level. In average, the correlation coefficients were 0.80 and 0.82 for the frequencies 0.30 Hz and 0.35 Hz, respectively.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.360-367
• /
• 2015

The present study investigated the habitats of Korean fir trees (Abies koreana E. H. Wilson) on Mt. Baekwun (Baekwun-san), determined the current distribution, quantified the contribution of biological and non-biological environmental factors affecting the distribution, derived actual and potential habitats, presented a plan for the establishment of protected areas, applied RCP 8.5 climate change scenario to analyze the effects of climate change on the future distribution of Korean fir trees, and predicted future potential habitats. According to the results of the study, 3,325 Korean fir trees (DBH >= 2.5 cm) inhabited Mt. Baekwun, and their distribution area was approximately 150 ha. Populations of Korean fir trees were confirmed to exist at an altitude of 900 m above sea level and were distributed up to 1,200 m. Based on potential distribution, areas appropriate for habitation by Korean fir trees were analyzed to be 450 ha, three times the current distribution area, with a focus on Sang Peak (Sang-bong), Eokbul Peak (Eokbul-bong), Ddari Peak (Ddari-bong), and Dosol Peak (Dosol-bong). The forest stands near Sang Peak, the main peak, were evaluated as those with the most appropriate potential for the habitation of Korean fir trees, and populations of the trees tended to prefer the northern slope rather than the southern slope. When climate change scenario RCP 8.5 was applied and future potential distribution was analyzed, the habitats were expected to decrease in area to 20 ha by 2050, with a focus on Sang Peak, and areas appropriate for habitation were predicted not to exist by 2080. Judging from such results, as global warming accelerates, the habitats of Korean fir trees are clearly expected to move from lowlands to highlands.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.321-329
• /
• 2018

A study was carried out to determine the influence of climatic environments on the growth characteristics and bulb quality of extremely early-maturing type onion grown at different altitudes, such as 60m, 200m, 350m and 700m above sea level (ASL). The mean air temperature during the growing season of extremely early-maturing type onion (October 18 to April 27) was $10.8^{\circ}C$, $9.6^{\circ}C$, $8.1^{\circ}C$ and $6.1^{\circ}C$ at 60m, 200m, 350m and 700m ASL. The mean air temperature during the bulb growth period (March 16 to April 14) was recorded $10.5^{\circ}C$, $9.4^{\circ}C$, $7.9^{\circ}C$ and $6.0^{\circ}C$ at 60m, 200m, 350m and 700 m ASL. Plant height, neck diameter, leaf number, leaf area, top fresh weight and top dry weight were significantly increased in growing of extremely early-maturing type onion at 60m ASL. Bulb/neck diameter ratio increased rapidly under the same temperature regime. The diameter and weight of the bulb were also the largest at 60m ASL during the bulb growth period (daily mean temperature of $12.5^{\circ}C$). At 60m ASL, there was the highest bulb size like a height, diameter and weight of bulb related directly on onion yield in the bulb growth period from March 16 to April 14. In contrast, yield and bulb quality were considerably decreased at 700m ASL during the bulb growth stage (daily mean temperature of $8.4^{\circ}C$). The quantity of extremely early-maturing type onion has gradually decreased as the daily average temperature drops below $12.5^{\circ}C$ during the bulb growth stage (March 16 to April 14). As a result, the lower temperature (daily mean temperature below $12.5^{\circ}C$) during the bulb growth stage significantly decreased the size and quantity of bulb in direction proportion.

• 한국균학회소식:학술대회논문집
• /
• 2014.05a
• /
• pp.49-49
• /
• 2014

South Korea is covered primarily by temperate vegetation; therefore, foliicolous lichens may not be expected to play an important role in its lichen flora. Indeed, more than 100 years after the first lichen record from South Korea reported by Hue, the paper "Pyrenocarpous lichens in Korea" published by Moon and Aptroot, reported on the presence of two foliicolous lichens, Strigula nemathora Mont, and S. smaragdula Fr., for the first time in South Korea. No detailed reports on foliicolous lichens have since been published in South Korea. In Japan, the neighboring country, approximately 83 foliicolous lichen species are distributed at the southernmost part under temperate to subtropical climatic conditions. However, a large number of foliicolous lichens, with many recent records, have been reported in neighboring countries like China and Taiwan. According to Thor et al., studies on foliicolous lichen flora of Asia are comparatively poor compared to those reported from America. There are six lichenogeographical regions: the Neotropics, Valdivia, Tethyan, African Paleotropics, eastern Paleotropics, and Neozelandic-Tasmanian, which are demarcated based on the known worldwide distribution pattern of foliicolous lichen flora. South Korea belongs to the eastern paleotropic region, where a higher number of local endemic foliicolous lichens have been reported. So far, there are a total of six known foliicolous lichen taxa from South Korea; S. concreta, S. macrocarpa, S. melanobapha, S. nemathora, S. smaragdula, and S. subelegans from Jeju Island. So far, the genus Strigula is the only known representative of the foliicolous lichen flora in South Korea. Among the recorded species, S. concreta, S. smaragdula, and S. subelegans are abundant and widespread. Japan, the closest area to Jeju Island, has the same distribution pattern of foliicolous lichens, with S. smaragdula, S. melanobapha, and S. subtilissima. Pollen studies conducted by Chung reported that changes in vegetation on Jeju Island, due mainly to deglacial warming and the influence of geographical change, resulted from sea-level rises. In general, all of the foliicolous lichens observed so far were restricted to the southernmost part of South Korea, particularly Jeju Island. Island might be influenced by its geographical setting. One reason could be the close dispersal distances of spores and vegetative propagules from areas such as the southern part of Japan and eastern part of China, where more foliicolous lichens can be found. Thor et al. also showed that the southern part of Japan harbors more foliicolous lichens than the northern part. Considering that China is close to Jeju Island, many foliicolous lichens, including S. concreta, S. macrocarpa, S. nemanthora, and S. smaragdula, have been reported from Yunnan province, the southernmost part of China. Geographically, this province is far away from Jeju Island. In other provinces, such as Shandong, Jiangsu, Shanghai, and Zhejiang, which are closer to Jeju Island, no foliicolous lichens have been recorded so far. Therefore, the chance of spores and propagules coming from such closer areas is questionable. Thus, the location of origin of ancestors of foliicolous lichens of South Korea and the time and means of their invasion of this island is controverisial. The current study would lead the way to finding answers to the above mentioned questions.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.93-101
• /
• 2017

The distribution of inter-annual variation in temperature would help evaluate the likelihood of a climatic risk and assess suitable zones of crops under climate change. In this study, we evaluated two methods to estimate the standard deviation of temperature in the areas where weather information is limited. We calculated the monthly standard deviation of temperature by collecting temperature at 0600 and 1500 local standard time from 10 automated weather stations (AWS). These weather stations were installed in the range of 8 to 1,073m above sea level within a mountainous catchment for 2011-2015. The observed values were compared with estimates, which were calculated using a geospatial correction scheme to derive the site-specific temperature. Those estimates explained 88 and 86% of the temperature variations at 0600 and 1500 LST, respectively. However, it often underestimated the temperatures. In the spring and fall, it tended to had different variance (e.g., increasing or decreasing pattern) from lower to higher elevation with the observed values. A regression analysis was also conducted to quantify the relationship between the standard deviation in temperature and the topography. The regression equation explained a relatively large variation of the monthly standard deviation when lapse-rate corrected temperature, basic topographical variables (e.g., slope, and aspect) and topographical variables related to temperature (e.g., thermal belt, cold air drainage, and brightness index) were used. The coefficient of determination for the regression analysis ranged between 0.46 and 0.98. It was expected that the regression model could account for 70% of the spatial variation of the standard deviation when the monthly standard deviation was predicted by using the minimum-maximum effective range of topographical variables for the area.

• Journal of the Korean earth science society
• /
• v.36 no.3
• /
• pp.222-235
• /
• 2015

Samples were collected from both places including the coastal area within the height of 5 m above the mean sea level (msl) (DH) and the top of the coastal terrace of 10-15 m msl (KS) high in Gwangseungri, Gochanggun, Korea. To find the origin of the deposit in the coastal area, granulometric analysis and geochemical analysis were performed. The result showed that the DH samples were originated from the reddish soils overlaying weathered bedrock which presented gradual change of chemical composition from the bottom toward the top. Clay minerals were found from the DH samples. These results concluded that the DH samples were found as in-situ weathered materials. The KS samples were originated from the soil layer covering gravel layer at the foot slope of the hill along the coast. The KS samples contained different chemical compositions from the DH. It is inferred that some of this layer was disturbed or experienced the influx of foreign material. The particle size of the KS samples was different from those found on the beach. The particle size of lower parts of KS site was finer than that on the beach, but the particle size of middle part of the site was coarser than that on the beach. The sorting of the KS site was poorer than that on the beach. Thus, it is inferred that some parts of the layer were formed by short-lived high energy event rather than sustained and continuous action of tidal currents and/or waves. Analysis using an optically stimulated luminescence (OSL) method showed that the burial age of samples from KS site were found 0.65-0.71 ka. Though the characteristics of the sediment layer and forming event in this area should be further studied, it can be inferred that this sedimentary layer formed by coastal flooding with storm.

• Economic and Environmental Geology
• /
• v.45 no.5
• /
• pp.551-564
• /
• 2012

This study carried out palynological analysis and seismic interpretation to establish a stratigraphic and environmental reconstruction mainly based on fossil palynomorphs and seismic reflection data correlated with the oil exploation well (BP-1) located in the Sora Sub-basin. There were frequent environmental and floral changes due to sea level change in the Sora Sub-basin. The palynomorph assemblages found in the well sediments enabled paleoecological zonation of the well sediment sequence resulting in 4 zones: Ecozone III, Ecozone IV, Ecozone V, Ecozone VI. Index fossils among palynomorphs indicate geological ages of the units within the well ranging from Eocene to Pleistocene, and paleoenvironment varies from freshwater to inner neritic marine. Previous studies suggest that the marine deposits were slightly different in stratigraphic range from well to well. It is considered the difference is credited to geomorphological setting. This study also shows stratigraphic correlation between existing wells and BP-1 well to establishes a standard stratigraphy of the Domi Basin.

• Korean Journal of Food Science and Technology
• /
• v.43 no.1
• /
• pp.30-38
• /
• 2011

Effects of depolymerization treatments of a carbohydrase mixture (CM), ultrasound, and irradiation on the physical properties of defatted mustard meal-based edible films (DMM films) were investigated. DMM hydrocolloids were added to CM (0.42% (w/w solution)), treated by ultrasound (500-700 W, 10-30 min) or ${\gamma}$-ray (40-100 kGy) to prepare film-forming solutions. Films were formed by drying. The CM treatment at 0.42% (w/w), pH 5.5, and 40-$50^{\circ}C$ with a 0.5 hr incubation time resulted in the highest colloidal stability in the film-forming solution. The depolymerization treatments did not dramatically change the water vapor permeability of the films. The solubility of the film decreased up to 53.1% by the CM treatment. The ultrasound treatment (700 W-30 min) decreased tensile strength and elongation. The ultrasound treatment (600 W-20 min) resulted in more compact and uniform structures of the films. Flavor profiles were differentiated by the power level and the time of the ultrasound treatment.