• Journal of The Geomorphological Association of Korea
• /
• v.17 no.4
• /
• pp.71-83
• /
• 2010

In this study, the volume of shoreline retreat at sea-cliffs in the Taean peninsula(West Coast of Korea) was estimated and their erosion and seasonal landforms characteristics changes were investigated through multi-temporal aerial photographs and field survey. Based on the analysis of aerial photographs through ortho-correction, the results show that the length of shoreline and erosion area increase as erosion at sea-cliffs occurs in Pado-li and Dundu-li. To obtain the seasonal quantitative landforms changes and retreat of sea-cliffs, we marked top, middle, and bottom datum-points, from which the distance to the nearest bedrock was repeatedly measured. In these regions, the retreat of sea-cliffs gradually increases in spring to summer, but gradually decreases in autumn. In particular, the typhoon that has a great influence on the Korean peninsula in July to September in summer would drastically increase the retreat of sea-cliffs in comparison with other seasons. As the outcrop of sea-cliffs repeats freezing and thawing in winter, the retreat of sea-cliffs increases a little due to active mechanical weathering. To know the erosion and seasonal landforms changes of sea-cliffs, we took pictures of them in every month and then analyze their condition. The retreat of sea-cliffs was repeatedly occurred by the circulation of the erosion of sea-cliff base, landslides, the formation of slope sediment debris and their erosion, in that order.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• v.4 no.1
• /
• pp.10-21
• /
• 2001

A new method of laser remote sensing is proposed, based on sensing the sea surface by a narrow laser beam (2-3cm) and analyzing statistically specular reflections. Construction of the angular dependency of the average density of specks versus the aircraft flight horizontal azimuth allows calculation of both intensity and azimuthal properties of the sea surface spectrum. The paper contains the experimental setup and technique, the field measurement data taken onboard an aircraft and the examples of calculated main statistical parameters of sea waves. Their energy-carrying component velocity is found by the mean velocity of an ensemble of specular points at the random sea surface. The surface wave nonlinearity is shown to affect substantially the statistical characteristics measured: mean numbers of specular areas with th given elevation and given slope, arranged along the line of crossing the sea surface by the scanning laser beam. Experimental measurement of a variance in the number of these areas yields a principal possibility to calculate the correlation function of the sea surface without its preliminary modeling.

• Journal of Environmental Science International
• /
• v.19 no.2
• /
• pp.171-184
• /
• 2010

Accurate simulation of the meteorological field is very important to assess the wind resources. Some researchers showed that sea surface temperature (SST) plays a leading role on the local meterological simulation. New Generation Sea Surface Temperature (NGSST), Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA), and Real-Time Global Sea Surface Temperature (RTG SST) have different spatial distribution near the coast and OSTIA shows the best accuracy compared with buoy data in the southeastern coast of the Korean Peninsula. Those SST products are used to initialize the Weather Research and Forecasting (WRF) Model for November 13-23 2008. The simulation of OSTIA shows better result in comparison with NGSST and RTG SST. NGSST shows a large difference with OSTIA in horizontal and vertical wind fields during the weak synoptic condition, but wind power density shows a large difference during strong synoptic condition. RTG SST shows the similar patterns but smaller the magnitude and the extent.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.6
• /
• pp.100-105
• /
• 2013

This paper presents a sea surface reconstruction method that uses measured radar images by applying filtering techniques and identifying wave characteristics of the surrounding the Ieodo ocean research station using WaveFinder (X-band wave measurement radar), which is installed in the station. In addition, the results obtained from real radar images are used to verify the reconstructed sea surface. WaveFinder is a marine system that was developed to measure wave information in real time. The WaveFinder installed in the station could acquire sequent images for the sea surface at constant time intervals to obtain real time information (Wave height, mean wave period, wave directionality, etc.) for the wave by getting a three-dimensional spectrum by applying an FFT algorithm to the acquired sequent images and wave dispersion relation. In particular, we found the wave height using the SNR (Signal to noise ratio) of the acquired images. The wave information measured by WaveFinder could be verified by comparing and analyzing the results measured using the wave measurement instrument (Sea level monitor) in the station. Additionally, the wave field around the station could be reconstructed through the three-dimensional spectrum and the inverse FFT filtering from the analyzed results for the measured radar images. We verified the applicability of the sea surface reconstruction method by comparing the measured and simulated sea surfaces.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.177-185
• /
• 2012

Wave field measurements were made over a period of 18 days to study the spatial distribution of incident wave on seaweed tarm field around Gumil-up Sea, Wando, Korea. These measured data were compared with data from the Geomun-do ocean weather/wave observation buoy. A numerical simulation model that combined the offshore design wave with the seasonal normal incoming wave was used to study the incident wave distribution surrounding a seaweed farm. The results are summarized as follows. (1) On-site wave measurements showed that the major relationship between maximum and significant wave height was $H_{max}=1.6H_{1/3}$. (2) Offshore incident wave energy reaching the coast was greatly influenced by the wind direction. A north wind reduced the incident wave energy and a south wind increased it. (3) The calculated maximum wave height under the design wave boundany conditions was in the range of 4~5 m and the reduction in the incident wave height ratio ranged from approximately 38.1% to 47.6% at Gumil-up Sea. Under normal wave conditions, the maximum wave heights were 3.6~4.0 m in summer and 2.3~2.7 m in winter while the reduction in the incident wave height ratio was about 41.8% to 49.1%. (4) The sea state in the southern area of Gumil-up was the most affected by ocean waves, whereas the sea state in the northern area was very stable. The significant wave ratio in the south was about six times that in the north.

• Journal of Environmental Science International
• /
• v.5 no.3
• /
• pp.277-284
• /
• 1996

The Characteristics of atmospheric flow and dispersion of air pollutants in the mountainous coastal area were studied using two-dimensional model by the combination of land-sea breezes and transport. The pollutants emitted into the simulated wind field in considering with the mesoscale local circulations. The typical effects of land-sea breezes and tophography of coastal area on the dispersion are discussed in detail, and the model is proved as an useful tool to pridict real time pollutant transport by the results of application studies in Pusan, Korea where the urbanized coastal area with mountainous topography. It was found that sulfur dioxide ($SO_2$) are differently transported and concentrated as going inland by the influence of the sea breeze with topographic changes. Key words : land-sea breezes, sulfur dioxide, dispersion, coastal area.

• Journal of applied mathematics & informatics
• /
• v.26 no.3_4
• /
• pp.519-530
• /
• 2008

This paper studies the multi-domain coupled system of one dimensional Arctic temperature field and establishes identification model about the thermodynamic parameters of sea ice (heat storage capacity, density and conductivity) by the so-called output least-square estimate according to the temperature data acquired by a monitor buoy installed in the Arctic ocean. By the optimal control theory, the existence and dependability of weak solution and the identifiability of identification model have been given. Moreover, necessary optimality condition is proposed. Furthermore, the optimal algorithm for the identification model is constructed. By using the optimal thermodynamic parameters of Arctic sea ice, the numerical simulation is implemented, and the numerical results of temperature distribution of Arctic sea ice are demonstrated.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.15 no.4
• /
• pp.100-107
• /
• 2007

We proposed the concatenation of logistics' Information to constructing the intelligent logistics city that is to manage efficiently cargo distribution as providing at real-time information of cargo location trace and management through the Telematics/RFID. Case of the Incheon of the "Air Logistics Hub", this area is on an increasing trend on the quantity of cargo transport of the Air & Sea cargo system until 2006. As intelligent project of the Air's and the Sea's field is independently developed at each area, it is a problem on the concatenation of logistics' information such as freight location trace and management, operation management and route information of cargo vehicles. Therefore, we propose the advanced transport service model for the concatenating smoothly of Air & Sea cargo system. In this paper, we only manage the model of Air & Sea cargo system of the advance logistics city.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.4
• /
• pp.53-71
• /
• 1993

The amount and quantity of sea casualities are increased by both an increasing sea-borne cargoes and heavy sea traffic. This paper analyzed the situation of Korean salvage company in order to activate on civilbasis, compared with the nature of common enterprises, and reported the object, the necessity, and the cha-racter of salvage company. For the purpose of this study, three parts are considered in order to analyze the environment of salvage company(the trend of sea casualties, sea-borne cargoes-passengers, ship tonnage/age) the effective planning to activate Korean salvage company are abstracted as follows : 1.the political assistance of concerned government authority. 2.the cooperation system of concerned business field. 3.the self-developing management of salvage company.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1237-1244
• /
• 2006

This research discussed about method for basis construction of sea jacket construction. Several access ways of method for foundation construction of sea jacket construction are used. Accompany many efforts of design and build process to overcome the form of construction work and application equipment, special quality of construction and restriction and so on of sea environment in the case of pile foundation. Therefore, great many factor of sea condition, construction special quality, base condition, construction time, equipment composition, worker composition etc. shows other work form in spot at sea jacket construction process.