• 전기화학회지
• /
• 제11권3호
• /
• pp.170-175
• /
• 2008

다중 생체시료 검출을 위한 바이오센서 연구를 위하여 각기 두 전위를 갖는 오스뮴 고분자를 함께 탄소 전극 (Screen Printed Carbon Electrodes) 위에 고정하였다. 새로운 개념의 다중 생체시료 검출 바이오센서 연구위하여 과산화수소의 환원과 글루코스의 산화에 관여하는 환원 효소와 산화 효소를 각각 이용하였다. 실험 목적에 위하여 염소 작용기 ($E^{O'}$ + 0.520 vs. Ag/AgCl)와 메톡시 작용기 ($E^{O'}$ + 0.150 vs. Ag/AgCl)를 각각 포함하는 두 개의 오스뮴 고분자를 합성하였다. 전자는 과산화수소의 환원에 대하여 좋은 촉매전류신호를 보였고, 후자는 당의 산화에 대하여 효과적인 촉매전류신호를 보였다.

• 마이크로전자및패키징학회지
• /
• 제10권4호
• /
• pp.47-52
• /
• 2003

PDP전극용 Ag전극 페이스트의 프릿으로 기존의 Pb-based 프릿을 대신 할 수 있는 Bi-based 조성의 새로운 유리조성의 가능성을 검토하였다. PDP디스플레이 응용을 위해 프릿의 저융점화 및 열팽창계수 제어를 행하였고, 이를 전극 페이스트 제조에 적용하여 스크린 프린팅된 전극을 평가하였다. $Bi_2O_3$를 50-60wt%이상 첨가된 $Bi_2O_3-B_2O_3-Al_2O_3$계 조성의 프릿은 연화점이 400∼$480^{\circ}C$, 열팽창계수가 7.31∼$10.02\times 10^{-6}/^{\circ}C$이며, 전극의 단자저항은 4.1∼4.8$\Omega$ 이었다. 본 연구에서 새로이 개발된 Bi계 프릿조성은 Pb계 조성의 프릿에 상당하는 물성을 얻을 수 있었으며, 이를 전극용 페이스트에 적용한 결과, 전극 프린팅에서 퍼짐성과 균일성이 우수하였다. PDP전극용 무연, 무 알카리 프릿으로 Bi계 조성의 적용가능성을 확인할 수 있었다.

• 전기화학회지
• /
• 제13권1호
• /
• pp.50-56
• /
• 2010

Multi-wall carbon nano-tube(MWCNT)를 이용해 screen printed carbon electrodes(SPCEs)을 제작하여 혈당센서의 선택성과 감도가 증가됨을 확인 할 수 있었다. 효소촉매반응을 위한 탄소전극으로의 전자이동의 매개체로 8족 금속 원소인 오스뮴을 중심금속으로 일차 아민을 포함하는 피리딘(pyridine) 리간드를 배위시켜 $[Os(dme-bpy)_2(4-aPy)Cl]^{+/2+}$를 합성하였다. 합성된 오스뮴 착물은 순환 전압전류법을 포함한 다양한 전기화학분석방법을 이용하여 전기적 성질을 조사하였다. 전기적 흡착방법을 이용하여 일차 아민을 갖는 착화합물을 전극위에 고정화 하였다. 오스뮴이 고정화된 MWCNT-SPCEs는 일반적인 carbon electrode보다 약 100배가량의 오스뮴이 흡착됨을 확인 할 수 있었다. (${\tau}_0=2.0\;{\times}\;10^{-9}\;mole/cm^2$) 마지막으로 당(Glucose)과 당 분해효소(Glucose Oxidase, GOx)에 의한 촉매반응의 전류를 확인하였고, 당 농도에 따라 선형 변화하는 전류의 양도 확인하였다.

• 한국염색가공학회지
• /
• 제23권3호
• /
• pp.169-178
• /
• 2011

The purpose of this study is to develop eco-printing method using natural dyes combined with chitosan treatment to impart various pattern effect on cotton fabric. It was examined whether tone-on-tone pattern effects could be produced by screen printing with chitosan paste and subsequently dip-dyed in natural dye bath. For polychromic colorants, fabrics were pre-mordanted and then screen printed with chitosan, while only chitosan printing treatment was applied for monochromic colorants. Color, dye uptake, washing, light and rubbing fastnesses of printed fabrics were measured in relation to the presence of chitosan printing. Pre-mordanting and chitosan printing treatment were applied to such polychromic colorants as madder, sappanwood, onion and cochineal. Also, printing pattern formation on fabrics was evaluated by differences in dye uptake and color. The results suggested that madder, onion and cochineal were effective on pattern formation. Regarding sappanwood, since dye uptake was increased only by pre-mordanting without chitosan printing treatment, there was little color difference and thus patterns were not clearly distinguished. Chitosan printing treatment tended to increase washing, light and rubbing fastnesses of dyed fabrics with polychromic colorants. Chitosan printing treatment was applied to monochromic colorants such as chlorophyll, gardenia and indigo and the effect of printing formation was examined according to the difference in dye uptake. Among monochromic dyes tried, chlorophyll was effective and chitosan printing improved washing and light fastnesses.

• 한국재료학회지
• /
• 제13권1호
• /
• pp.18-23
• /
• 2003

Properties of Ag thick films fabricated by using low temperature curable silver pastes were investigated. Ag pastes were consisted of polymer resins and silver powders. Ag pastes were used for conductive or fixing materials between board and various electrical and electronic devices. Low temperature curable Ag pastes have some advantages over high temperature curable types. In cases of chip mounting, soldering properties were required for screen printed Ag thick films. In this study, four types of Ag pastes were fabricated with different compositions. Screen printed Ag thick films on alumina substrates were fabricated at various curing temperatures and times. Thickness, resistivity, adhesive strength and solderability of fabricated Ag thick films were characterized. Finally, Ag thick films produced using Ag pastes, sample A and B, cured at $150^{\circ}C$ for longer than 6 h and $180^{\circ}C$ for longer than 2 h, and $150^{\circ}C$ for longer than 1 h and $180^{\circ}C$ for 1 h, respectively, showed low resistivities of $10^{-4}$ $∼10^{-5}$ Ωcm and good adhesive strength of 1∼5 Mpa. Soldering properties of those Ag thick films with curing temperatures at solder of 62Sn/36Pb/3Ag were also investigated.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.250-253
• /
• 2007

An evaporated Ti/Pd/Ag contact system is most widely used to make high-efficiency silicon solar cells, however, the system is not cost effective due to expensive materials and vacuum techniques. Commercial solar cells with screen-printed contacts formed by using Ag paste suffer from a low fill factor and a high shading loss because of high contact resistance and low aspect ratio. Low-cost Ni and Cu metal contacts have been formed by using electroless plating and electroplating techniques to replace the Ti/Pd/Ag and screen-printed Ag contacts. Ni/Cu alloy is plated on a silicon substrate by electro-deposition of the alloy from an acetate electrolyte solution, and nickel-silicide formation at the interface between the silicon and the nickel enhances stability and reduces the contact resistance. It was, therefore, found that nickel-silicide was suitable for high-efficiency solar cell applications. The Ni contact was formed on the front grid pattern by electroless plating followed by anneal ing at $380{\sim}400^{\circ}C$ for $15{\sim}30$ min at $N_{2}$ gas to allow formation of a nickel-silicide in a tube furnace or a rapid thermal processing(RTP) chamber because nickel is transformed to NiSi at $380{\sim}400^{\circ}C$. The Ni plating solution is composed of a mixture of $NiCl_{2}$ as a main nickel source. Cu was electroplated on the Ni layer by using a light induced plating method. The Cu electroplating solution was made up of a commercially available acid sulfate bath and additives to reduce the stress of the copper layer. The Ni/Cu contact was found to be well suited for high-efficiency solar cells and was successfully formed by using electroless plating and electroplating, which are more cost effective than vacuum evaporation. In this paper, we investigated low-cost Ni/Cu contact formation by electroless and electroplating for crystalline silicon solar cells.

• 전기화학회지
• /
• 제10권2호
• /
• pp.150-154
• /
• 2007

본 연구에서는 8족 금속 원소인 오스뮴을 중심금속으로 일차아민을 포함하고 있는 피리딘 (pyridine) 화합물을 배위시켜 착화합물을 합성하였다. 합성된 오스뮴 착화합물은 $[Os(dme-bpy)_2(ap-im)Cl]^{+/2+}$을 순환전압전류법을 포함한 다양한 전기화학분석법을 이용하여 전기적인 성질을 조사하였다. 또한 합성된 일차 아민을 갖는 오스뮴 착화합물을 이용하여 당 측정용 바이오센서를 제작하기 위하여 금 나노입자(Cold nano-particles)를 전기적 흡착방법을 이용하여 스크린 인쇄방법으로 만든 탄소반죽 전극 (Screen Printed Carbon Electrodes, SPEs) 위에 고정화를 시켰다. 당과 당 분해효소(Glucose Oxidase, GOx)를 혼합하여 발생하는 산화촉매전류를 확인하였고, 당 농도에 따라 변화하는 산화촉매전류의 양도 확인하였다. 새롭게 만들어진 바이오센서는 1 mM 과 같은 낮은 농도에서 감응할 수 있는 바이오센서에 응용할 수 있음을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.349-358
• /
• 2000

Fabrication and Characterization of Bi$_{2}$/Sr$_{2}$/CaCu$_{2}$/O$_{8}$(Bi2212) superconductor thick films were fabricated successfully on C tapes by liquid reaction between Cu-free precursors of Bi$_{x}$/SrCaO/$_{y}$(x=1.2-2) and Cu tapes. Cu-free Bi-Sr-Ca-O powder mixtures were screen-printed on Cu tapes and heat-treated at 850-87$0^{\circ}C$ for several minutes in air oxygen nitrogen and low oxygen pressure. In order to obtain the optimum heat-treatment condition we studied the effect of the precursor composition the printing thickness and the heat-treatment atmosphere on the superconducting properties of Bi2212 films and the reaction mechanism. Microstructures and phases of thick films were analyzed by films and the reaction mechanism. Microstructures and phases of thick films were analyzed by optical microscope and XRD. The electric properties of superonducting films were examined by the four probe method. At heat-treatment temperature the thick films were in a partially molten state by liquid reaction between CuO of the oxidized copper tape and the precursors which were printed on Cu tapes. During the heat-treatment procedure Bi2212 superconducting particle nucleate and grow in preferred orientations.ons.s.

• 전기화학회지
• /
• 제23권3호
• /
• pp.73-80
• /
• 2020

과산화수소를 이용한 펜톤(Fenton)산화법은 수처리 및 토양 복원분야에서 활용되는 친환경 산화방법이다. 이 방법으로 오염물질을 제거할 때, 오염물의 농도에 따라 과산화수소의 농도를 적절하게 조절하는 것이 상당히 중요하다. 이에 본 연구에서는 HRP (horseradish peroxidase) 효소를 이용한 전기화학적 바이오센서를 제조하고 효소의 활성과 과산화수소의 검출 특성에 대한 연구를 수행하였다. SPCE (Screen Printed Carbon Electrode)의 작업 전극 표면에 키토산과 AuNP를 이용하여 HRP를 전착하였다. 이 후, 전위주사법(CV)과 전기화학적 임피던스 분광법(EIS)을 이용하여 효소의 고정화를 확인하였다. 또한 시간대전류법(CA)과 UV 분광법으로부터 HRP 효소의 활성을 확인하였다. 본 연구에서 제조한 바이오센서를 PBS 전해질에 담그고 과산화수소를 적정하여 CA 분석으로부터 전극에서 발생하는 전류를 측정하였다. 발생 전류는 과산화수소의 농도에 대하여 선형적으로 증가하였으며, 전류로부터 과산화수소의 농도를 예측할 수 있는 검정곡선을 도출하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.192-193
• /
• 2007

An evaporated Ti/Pd/Ag contact system is most widely used to make high-efficiency silicon solar cells, however, the system is not cost effective due to expensive materials and vacuum techniques. Commercial solar cells with screen-printed contacts formed by using Ag paste suffer from a low fill factor and a high shading loss because of high contact resistance and low aspect ratio. Low-cost Ni and Cu metal contacts have been formed by using electro less plating and electroplating techniques to replace the Ti/Pd/Ag and screen-printed Ag contacts. Ni/Cu alloy is plated on a silicon substrate by electro-deposition of the alloy from an acetate electrolyte solution, and nickel-silicide formation at the interface between the silicon and the nickel enhances stability and reduces the contact resistance. It was, therefore, found that nickel-silicide was suitable for high-efficiency solar cell applications. Cu was electroplated on the Ni layer by using a light induced plating method. The Cu electroplating solution was made up of a commercially available acid sulfate bath and additives to reduce the stress of the copper layer. In this paper, we investigated low-cost Ni/Cu contact formation by electro less and electroplating for crystalline silicon solar cells.