• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.96-104
• /
• 2003

This paper presents the measurement and correction method of PCB alignment errors for PCB screen printer. Electronic equipment is getting smaller and yet must satisfy high performance standard. Therefore, there is a great demand for PCB with high density. However conventional PCB screen printer doesn't have enough accuracy to accommodate the demand for high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because the alignment errors of PCB occur when it is loaded to the screen printer. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors with high-accuracy. An automatic optical inspection part measures the PCB alignment errors using machine vision, and the high-accuracy 3-axis stage makes correction for these errors. This system used two CCD cameras to get images of two fiducial marks of PCB. The centers of fiducial marks are obtained by using moment, gradient method. The first method is calculating the centroid by using first moment of blob, and the latter method is calculating the center of the circle whose equation is obtained by curve-fitting the boundaries of fiducial mark. The operating system used to implement the whole set-up is carried in Window 98 (or NT) environment. Finally we implemented this system to PCB screen printer.

• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.88-95
• /
• 2003

This paper presents the measurement and correction method of PCB alignment errors for PCB screen printer. Electronic equipment is getting smaller and yet must satisfy high performance standard. Therefore, there is a great demand for PCB with high density. However conventional PCB screen printer doesn't have enough accuracy to accommodate the demand fur high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because the alignment errors of PCB occur when it is loaded to the screen printer. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors with high-accuracy. An automatic optical inspection part measures the PCB alignment errors using machine vision, and the high-accuracy 3-axis stage makes correction for these errors. This system used two CCD cameras to get images of two fiducial marks of PCB. The geometrical relationship between PCB, cameras, and xy$\theta$ stage is derived, and analytical equations for alignment errors are also obtained. The unknown parameters including camera declining angles and etc. can be obtained by initialization process. Finally, the proposed algorithm is verified by experiments by using test bench.

• 한국재료학회지
• /
• 제29권4호
• /
• pp.228-232
• /
• 2019

Copper electroplating and electrode patterning using a screen printer are applied instead of lithography for heterostructure with intrinsic thin layer(HIT) silicon solar cells. Samples are patterned on an indium tin oxide(ITO) layer using polymer resist printing. After polymer resist patterning, a Ni seed layer is deposited by sputtering. A Cu electrode is electroplated in a Cu bath consisting of $Cu_2SO_4$ and $H_2SO_4$ at a current density of $10mA/cm^2$. Copper electroplating electrodes using a screen printer are successfully implemented to a line width of about $80{\mu}m$. The contact resistance of the copper electrode is $0.89m{\Omega}{\cdot}cm^2$, measured using the transmission line method(TLM), and the sheet resistance of the copper electrode and ITO are $1{\Omega}/{\square}$ and $40{\Omega}/{\square}$, respectively. In this paper, a screen printer is used to form a solar cell electrode pattern, and a copper electrode is formed by electroplating instead of using a silver electrode to fabricate an efficient solar cell electrode at low cost.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.295-295
• /
• 2000

In this paper, the measurement algorithm of PCB alignment error is developed using image processing. The X-Y-$\theta$ table correcting PCB alignment error is driven by drive module based on microprocessor according to calculation results obtained through image processing procedure. In order to recognize the X-Y-$\theta$ position errors, two fiducial points are marked on PCB and two cameras of ultraviolet rays types are used for detection of the points to capture exactly fiducial points under disturbance of illumination change. Through application for a practical screen printer, the precision control using the developed position control system can be realized about 2.5${\mu}{\textrm}{m}$ in table moving range and 8${\mu}{\textrm}{m}$ in camera processing precision.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.208.2-208.2
• /
• 2005

• 반도체디스플레이기술학회지
• /
• 제2권4호
• /
• pp.27-30
• /
• 2003

The effect of fabrication method of catalytic layer on electrode performance has been investigated. Brush, spray gun and screen printer were used as fabrication tool and catalytic layers were formed by several methods in screen printing. Direct screen printing on polymer membrane, screen printing on carbon paper, and their combined method were applied. In the electrode fabricated by the screen printing method, Pt loading of Pt/C catalysts could be cut down to 50%, compared with results by the brushing and spraying methods. The best result of electrode was obtained as 0.6 V, at 1 A/$\textrm{cm}^2$ when catalytic layer was formed by the combined way.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.122-122
• /
• 2001

In this research, an Electronic White Board Control System is developed that stores and prints the data written on the white board. This control system is constructed using an embedded single board PC, whose function is the acquisition(from CCD image sensor system), processing and storing of the data on the screen. The properties of this system are as follows: 1. The system is able to move the screen on the right and left. 2. The system is able to output the data written on the screen to a connected printer. 3. The system is controlled by an external remote PC connected to the system by serial line as well as by the keys on the control panel. The data written on the screen can be sent to the external PC and then can be modified and stored...

• 한국컴퓨터정보학회논문지
• /
• 제27권11호
• /
• pp.115-121
• /
• 2022

표면실장기술(SMT)에서 솔더 크림을 바르는 장비인 스크린 프린터는 패드가 작아지면서 도포 불량이 많이 발생한다. 이를 해결하기 위해 최근에는 젯 프린터를 사용하고 있다. 그런데 젯 프린터 헤드에 적용하는 밸브의 끝단 노즐을 깨끗하게 청소하지 않으면 과납이나 오도포가 발생한다. 이를 방지하기 위해서는 노즐을 주기적으로 청소해줘야 한다. 본 논문에서는 젯 프린터의 안정적인 솔더 크림 도포를 위하여 기존 기술보다 더욱 안정적으로 청소하는 방법을 제시하였다. 이 방법은 35mm 폭의 무진천을 재단하여 롤 형태로 감아 놓고, 반대쪽에 DC 기어드 모터로 회전시켜 닦는다. 그 결과 약 2,000회 도팅 주기로 청소를 했을 때 노즐 표면에 솔더 페이스트가 남지 않고 잘 닦이는 것을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제24권8호
• /
• pp.682-685
• /
• 2011

An engine oil sensor based on multiwall carbon nanotubes was fabricated with screen printing method. Since carbon nanotubes are generally intertwined, dispersion of the carbon nanotubes in the binding agent (ethyl cellulose, a-terpineol, frit) is a key factor for large yield of engine oil sensor. By conventional dispersion method, a hand-mill method, the maximum yield was 80% at most. However, we used the hand ultrasonic, in order to increase the yield of the sensors. As a results, our engine oil sensor fabricated by the screen printing method shows excellent yield rate of 97%, when we dispersed a paste by the hand ultrasonic method.

• 한국인쇄학회지
• /
• 제16권2호
• /
• pp.45-59
• /
• 1998

Halftonig is a technique to create the appearance of intermideate tone levels by controlling the spatial distribution of the binary pixel values. Recently, many printing devices such as image setter, inkjet printer, laser printer and facsimile, generate image, they require the technique. Ordered dither is achieved comparing the gray scale image to periodic array. This method is fast, but it occurs periodic patterns. Conentional error diffusion generates a good image. But processing speed is very slow and appeares worm artifacts in middle tone scale. To improve it, Bns(Blue noise Screen) is developed based on Gaussian distribution. In this paper, we discribe methods to design BNS based human visual characteristics and to improve blue appearing at edge area of image by USM(using unsharp mask).