• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.564-568
• /
• 2006

Smooth picture module is operated by vibration to tilt the light from the DMD (digital micro mirror device) of DLP projection TV, which makes the screen of the TV smoother and DMD chip cost lower. To satisfy the vibration characteristics of smooth picture module, it is designed by optimizing moment of inertia, spring constant and damping coefficient, using structural and fluid dynamic simulation that showed a good agreement with experimental data. To reduce the material cost and moment of inertia, engineering plastic is used and the reliability is estimated. A VCM (voice coil motor) type actuator for smooth picture has to satisfy performance requirements such as higher driving force, lower power consumption, and lower cost. The initial design and optimization for VCM was performed using FE analysis. It allowed us to optimize the design of magnetic circuit of the proposed actuator to obtain higher force while maintaining a lower cost.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1603-1606
• /
• 2005

Eye Glass Display (EGD) with microdisplay to realize the virtual display can make the large screen, so virtual image has been developed by using microdisplay panel. This paper shows study of low cost lens design and simulation for microdisplay system with 0.6" Liquid Crystal on Silicon (LCoS) panel. Lens design optimized consider to spherical aberration, astigmatism, distortion, and chromatic aberration. Code V is used and it designed an aspheric lens about exit pupil 6mm, eye relief 20mm and 35 degree of field of view (FOV). With the application this aspheric lens to LCOS type's microdisplay, virtual image showed 50 inch at 2m. One side of the aspheric lens was constituted from diffractive optical element (DOE) for the improvement in a performance. It had less than ${\pm}2%$ of distortion value and modulation transfer function in axial had 20% of resolution with 30 lp/mm spatial frequency. The optical system is suitable for display of 0.6"-diagonal with SVGA.

• Advances in Computational Design
• /
• 제5권3호
• /
• pp.323-347
• /
• 2020

The enhancements of bioenergy production effectiveness require the comprehensively experimental study of several parameters affecting these bioprocesses. The interpretation of the obtained experimental results and the estimation of optimum yield are extremely complicated such as misinterpreting the results of an experiment. The use of mathematical modeling and statistical experimental designs can consistently supply the predictions of the potential yield and the identification of defining parameters and also the understanding of key relationships between factors and responses. This paper summarizes several mathematical models used to achieve an adequate overall and maximal production yield and rate, to screen, to optimize, to identify, to describe and to provide useful information for the effect of several factors on bioenergy production processes. The usefulness, the validity and, the feasibility of each strategy for studying and optimizing the bioenergy-producing processes were discussed and confirmed by the good correlation between predicted and measured values.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.235-238
• /
• 2006

As the screen size of LCD TV increases, an external electrode fluorescent lamp (EEFL) has been suggested to be applicable as backlight source for LCD TV. Since the EEFL has non-linear characteristics, which makes the analysis and design complicated. In this paper, the characteristics of the EEFL are investigated and a full-bridge RLC series-resonant inverter is analyzed and designed for EEFL backlight of 32-inch LCD TV. Finally, the experimental results are shown to validate the analysis and design.

• 조명전기설비학회논문지
• /
• 제25권6호
• /
• pp.1-8
• /
• 2011

Night-Scape Lighting with the use of LED lighting has become very popular recently by the merits of energy saving, environmental friendlyness, sensitivity and conversion trends. LED lighting designs are being used diversly as outer elements for screen media stage production as well as buildings with fusioning of information technology. However, methods for analyzing the cases effectively are far from completion. This research evaluates the recent trends of Night-Scape Lighting with LED and processes it through database and aims to propose LED Night-Scape Design process for the various architectural night-scape lighting designs.

• 설비공학논문집
• /
• 제14권8호
• /
• pp.664-670
• /
• 2002

A heat sink (HS) system using heat pipes for electronics systems was studied. The experimental results indicate that a cooling capacity of up to 150w at an overall temperature difference of $50^{\circ}C$ can be attainable. The heat sink design program also showed that a computer simulation can predict the most of the parameters involved. To do so, however, the interior temperature distribution had to be verified by experimental results. The current simulation results were close to the experimental results in acceptable range. The simulation study showed that the design program can be a good tool to predict the effects of various parameters involved in the optimum design of the heat sink.

• 한국실내디자인학회논문집
• /
• 제21권3호
• /
• pp.87-94
• /
• 2012

This thesis has purpose of explaining that blur color is not only appreciated but also undecided spacial color in contemporary space design and examining effects of space experience through the light. In keeping such developments, blur color has been perceived as the object of another tool in contemporary space and has provided us with new views by providing various program, sensor and screen from digital media. With the expansion of blur color, light has changed a spacial color structural that is not simple meaning factor into the essential concept. So this research aims to understand the principle of blur color in Olafur Eliasson's work, which of the fine artist in diverse fields from installation art to media art. The principle of blur color such as deconstruction of vanishing point, dimensional transfer, color gradation, and fiction of visual perception makes it possible to extract the expressed element and method of blur color. Meanwhile, the features of blur color such as sense of depth from viewpoint changes, hybrid from collapse of order, media metamorphosis from reconstitution and interaction from uncanny can be inferred from case analysis.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2006년도 추계학술발표대회
• /
• pp.281-284
• /
• 2006

본 논문은 지체장애인들의 컴퓨터 접근성을 향상시키기 위해서 Head Pointing System을 기반으로한 키보드 대체 방법을 제안한다. 먼저 컴퓨터의 접근성을 돕기위해 현재 사용되고있는 Head Pointing System에는 어떤 기능을 대체하고 있는지 간략하게 살펴보고, 본 논문에서 제안하는 방법이 이전에 사용되었던 Head Pointing System, On-Screen Keyboard를 함께 사용하여 문자를 입력하는 방식에 비해 어떤 이점이 있는 확인한다. 또한, Quikwriting 방식을 사용하여 사용자에게 단순하고 직관적인 제스쳐를 요구하도록하여 입력에 대한 부담을 낮추고, 사용자 개인의 제스쳐 특성에 따라 문자를 입력할 수 있도록 하기위해 신경망 알고리즘을 사용하였고 이를통해 Head Pointing System기반 문자입력 방법이 유용함을 확인할 수 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권3호
• /
• pp.129-135
• /
• 2012

A number of surface mount technology (SMT) process variables including land design are considered for minimizing tombstone defect in flexible printed circuit assembly in high volume manufacturing. As SMT chip components have been reduced over the past years with their weights in milligrams, the torque that once helped self-centering of chips, gears to tombstone defects. In this paper, we have investigated the correlation of the assembly process variables with respect to the tombstone defect by employing statistically designed experiment. After the statistical analysis is performed, we have setup hypotheses for the root causes of tombstone defect and derived main effects and interactions of the process parameters affecting the hypothesis. Based on the designed experiments, statistical analysis was performed to investigate significant process variable for the purpose of process control in flexible printed circuit manufacturing area. Finally, we provide beneficial suggestions for find-pitch PCB design, screen printing process, chip-mounting process, and reflow process to minimize the tombstone defects.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 춘계학술발표논문집
• /
• pp.260-265
• /
• 2006