• Communications of Mathematical Education
• /
• v.25 no.2
• /
• pp.381-402
• /
• 2011

In this paper we study formulae of the triangle's area. We solve problems related with making new formulae of the triangle's area. These formulae is consisted of some elements of triangle, for example side, angle, median, perimeter, radius of circumcircle. We transform formulae $S=\frac{1}{2}acsinB$, $S=\frac{abc}{4R}$, $S=\sqrt{p(p-a)(p-b)(p-c)}$, and make new formulae of the triangle's area. Some formulas are received in the process of Research and Education program in the science high school. We expect that our results will be used in the Research and Education program in the science high school.

• Corrosion Science and Technology
• /
• v.9 no.2
• /
• pp.98-103
• /
• 2010

In order to further reduce the cost without reducing the corrosion resistance, a high-manganese austenitic alloy for sink roll or stabilizer roll in continuous hot-dip coating lines was developed. A systematic study of corrosion behavior of the high-manganese austenitic alloy in pure zinc bath at $490^{\circ}C$ was carried out. The results shows that, the high-manganese austenitic alloy shows better corrosion resistance than 316L steel. The corrosion rate of the high-manganese austenitic alloy in pure zinc bath is calculated to be approximately $6.42{\times}10^{-4}g{\cdot}cm^{-2}{\cdot}h^{-1}$, while the 316L is $1.54{\times}10^{-3}g{\cdot}cm^{-2}{\cdot}h^{-1}$. The high-manganese austenitic alloy forms a three-phase intermetallic compound layer morphology containing ${\Gamma$}, ${\delta}$ and ${\zeta}$ phases, while the 316L is almost ${\zeta}$ phase. The ${\Gamma}$ and ${\delta}$ phases of the high-manganese austenitic alloy contain about 8.5 wt% Cr, the existence of Cr improve the stabilization of phases, which slow down the reaction of Fe and Zn, improve the corrosion resistance of the high-manganese austenitic alloy. So substitute the nickel with the manganese to manufacture the high-manganese austenitic alloy of low cost is feasible.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.2
• /
• pp.385-392
• /
• 2014

Random walk hypothesis is a hypothesis that explains theoretically the difficulty in forecasting in financial market. Various tests for the hypothesis have been developed so far but it is known that those tests suffer from low power and size distortion. In this article, a sign test based on slopes are suggested to overcome these difficulties. A simulation study is conducted to compare this test to the often used Dickey and Fuller (1979) test.

• Journal of The Korean Association For Science Education
• /
• v.32 no.8
• /
• pp.1367-1377
• /
• 2012

Inquiry activity is a major source of student investigation which both of the national curriculum standards strongly emphasize for achieving scientific literacy. The purpose of this study was to examine inquiry activities incorporated in high school biology textbooks used in China and Korea. The inquiry activities were examined with regard to inquiry level and science process skills. Bell's and a modification of Padilla's framework were used in these analyses. Results show that the Korean textbooks were more exclusively occupied by simple inquiry activities - None of them provided activity more complex than level 2 inquiry. In addition, the Korean textbooks had uniformly basic science process skills, whereas their Chinese counterparts gave students some challenges for higher level process skills. Therefore, it cannot be guaranteed that the activities in the Korean textbooks are helpful in guiding students toward a gradual progression to high-level inquiry. Implications for inquiry-based science education were suggested based on the results of the study.

• The Pure and Applied Mathematics
• /
• v.31 no.1
• /
• pp.57-81
• /
• 2024

We introduce a new degree reduction method for homogeneous symmetric polynomials on binary variables that generalizes the conventional degree reduction methods on monomials introduced by Freedman and Ishikawa. We also design an degree reduction algorithm for general polynomials on binary variables, simulated on the graph coloring problem for random graphs, and compared the results with the conventional methods. The simulated results show that our new method produces reduced quadratic polynomials that contains less variables than the reduced quadratic polynomials produced by the conventional methods.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.4
• /
• pp.933-942
• /
• 2005

Recently, the decrease of the number of the third graders in a high-school have serious influences on the number of a limit matriculation of colleges and universities. The purpose of this paper is to forecast for the number of a high-school graduate until 2022 year in Daegu city as based on the resident registration population. As the based period of 2004, most college and universities in Daegu city have to reduce the 37.5% of the number of limit matriculation until 2022 year to equal the number of the third graders in a high-school.

• Journal of the Korean Vacuum Society
• /
• v.18 no.3
• /
• pp.203-207
• /
• 2009

Copper is known as a replacement for aluminum wire which is used for semiconductor. Because specific resistance of Cu ($1.67{\mu}{\Omega}$-cm) is lower than that of Al ($2.66{\mu}{\Omega}$-cm), Cu reduce RC delay time. Although melting point of Cu($1085^{\circ}C$) is higher than melting point of Al, Cu have characteristic to easily react with Silicon(Si) in low temperature, and it isn't good at adhesive strength with Si. For above these reason, research of diffusion barrier to prevent reaction between Cu and Si and to raise adhesive strength is steadily advanced. Our study group have researched on W-C-N (tungsten-carbon-nitrogen) Diffusion barrier for preventing diffusion of Cu through semiconductor. By recent studies, It's reported that W-C-N diffusion barrier can even precent Cu and Si diffusing effectively at high temperature. In this treatise, we vaporized different proportion of N into diffusion barrier to research Cu's Electromigration based on the results and studied surface hardness in the heat process using nano scale indentation system. We gain that diffusion barrier containing nitrogen is more stable for Cu's electromigration and has stronger surface hardness in heat treatment process.

• Journal of Science Education
• /
• v.37 no.2
• /
• pp.405-415
• /
• 2013

The purpose of this study was to investigate high school students in natural science track and engineering major university students' perceptions about the writing and composition education. A total of 318 high school students in natural science track from two high schools in a metropolitan area and 447 university students majoring in engineering from three universities participated in the survey and asked to response their perceived status and needs of writing education for science-engineering track. The survey instrument, developed by Lee et al.(2009), was used for this study. The data was analyzed through the SPSS 18.0 program for Windows for Multiple Response Frequency Analysis, Descriptive Statistics, Independent Samples t-test, and One-way Analysis of Variance. The results indicated that high school students relatively perceived that writing education was less necessary compared to university students. In addition, high school students found writing less difficult than university students do. In related to studying their experience with writing and composition education, almost no high school students have taken writing classes and university students have taken an average of one class. Most university students who took writing classes took basic writing classes that were not programmed for students in Science and Engineering. In the basic survey to revitalize writing and composition education for Science and Engineering students in different majors, the level of writing and composition education required by students in each major was different. Writing was considered most necessary for students majoring in Chemical Engineering, followed by students majoring in Mechanical Engineering and Electronic Engineering. The study of writing and composition education for high school and college should extend to studies on teachers or professors who teach writing, studies on contents and methods of writing education, and studies on the development of writing programs for different majors in university.

• ETRI Journal
• /
• v.39 no.1
• /
• pp.51-61
• /
• 2017

This paper demonstrates a systematic approach for the design of broadband, high efficiency, high power, Class-AB RF amplifiers with high gain flatness. It is usually difficult to simultaneously achieve a high gain flatness and high efficiency in a broadband RF power amplifier, especially in a high power design. As a result, the use of a computer-aided simulation is most often the best way to achieve these goals; however, an appropriate initial value and a systematic approach are necessary for the simulation results to rapidly converge. These objectives can be accomplished with a minimum of trial and error through the following techniques. First, signal gain variations are reduced over a wide bandwidth using a proper pre-matching network. Then, the source and load impedances are satisfactorily obtained from small-signal and load-pull simulations, respectively. Finally, two high-order Chebyshev low-pass filters are employed to provide optimum input and output impedance matching networks over a bandwidth of 100 MHz-500 MHz. By using an EM simulation for the substrate, the simulation results were observed to be in close agreement with the measured results.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.407-417
• /
• 2018

A novel family of Buck mode three-level direct ac converters with a high frequency link is proposed. These converters can transfer an unsteady high ac voltage with distortion into a regulated sinusoidal voltage with a low THD at the same frequency. The circuit configuration is constituted of a three-level converter, high frequency transformer, cycloconverter, as well as input and output filters. The topological family includes forward, push-pull, half-bridge, and full-bridge modes. In order to achieve a reliable three-level ac-ac conversion, and to overcome the surge voltage and surge current of the cycloconverter, a phase-shifted control strategy is introduced in this paper. A prototype is presented with experimental results to demonstrate that the proposed converters have five advantages including high frequency electrical isolation, lower voltage stress of the power switches, bi-directional power flow, low THD of the output voltage, and a higher input power factor.