• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 추계학술발표강연 및 논문개요집
• /
• pp.79-79
• /
• 2002

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.819-821
• /
• 1998

Arachidic acid(AA) was used as LB films and its dielectric and conduction characteristics were investigated. The relative dielectric constant(${\varepsilon}_{LB}$) of AA LB films obtained from capacitance-frequency properties was about $3.5{\sim}4.1$. And the conductivity(${\sigma}_{LB}$) of AA LB films obtained from Current-Voltage characteristics was about $2.6{\times}10^{-15}[S/cm]$. Also, the conduction mechanism of current in LB films was dependant on Schottky type and the barrier height obtained from Schottky plot was about 1.4[eV].

• 전자공학회논문지T
• /
• 제35T권1호
• /
• pp.7-13
• /
• 1998

Submicron급의 고집적 소자에서는 종래의 긴 채널 소자에서 생기지 않던 짧은 채널효과에 기인하는 2차원적인 영향으로 고온전자(hot carrier) 등이 발생하여 소자의 신뢰성을 저하시키는 요인이 되고 있어 이들의 발생을 최소화할 수 있는 다양한 형상의 소오스/드레인 구조가 연구되고 있다. 본 논문에서는 제작공정의 간략화, 소자규모의 미세화, 응답속도의 고속화에 적합한 소오스/드레인에 Schottky장벽 접합을 채택한 MOS형 트랜지스터를 제안하고, p형 실리콘을 이용한 소자의 제작을 통하여 동작특성을 조사하였다. 이 소자의 출력특성은 포화특성이 나타나지 않는 트랜지스터의 작용이 나타났으며, 전계효과 방식의 동작에 비하여 높은 상호콘덕턴스를 갖고 있는 것으로 나타났다. 여기서 고농도의 채널층을 형성하여 구동 전압을 낮게하고 높은 저항의 기판을 사용하므로서 드레인과 기판사이의 누설전류를 감소시키는 등의 개선점이 있어야 할 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제31권6호
• /
• pp.367-371
• /
• 2018

1,200 V class junction barrier schottky (JBS) diodes and schottky barrier diodes (SBD) were simultaneously fabricated on the same 4H-SiC wafer. The resulting diodes were characterized at temperatures from room temperature to 473 K and subsequently compared in terms of their respective I-V characteristics. The parameters deduced from the observed I-V measurements, including ideality factor and series resistance, indicate that, as the temperature increases, the threshold voltage decreases whereas the ideality factor and barrier height increase. As JBS diodes have both Schottky and PN junction structures, the proper depletion layer thickness, $R_{on}$, and electron mobility values must be determined in order to produce diodes with an effective barrier height. The comparison results showed that the JBS diodes exhibit a larger effective barrier height compared to the SBDs.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.306-312
• /
• 2022

서로 다른 PN 비율과 금속화 어닐링 온도에 의해 장벽 높이가 다른 4H-SiC 병합 PiN Schottky(MPS) 다이오드의 전기적 특성과 심층 트랩을 조사했다. MPS 다이오드의 장벽 높이는 IV 및 CV 특성에서 얻었다. 전위장벽 높이가 낮아짐에 따라 누설 전류가 증가하여 10배의 전류가 발생하였다. 또한, 심층 트랩(Z_1/2 및 RD_1/2)은 4개의 MPS 다이오드에서 DLTS 측정을 통해 밝혀졌다. DLTS 결과를 기반으로, 트랩 에너지 준위는 낮은 장벽 높이와 함께 22~28%의 얕은 수준으로 확인되었다. 이는 쇼트키 장벽 높이에 대해 DLTS에 의해 결정된 결함 수준 및 농도의 의존성을 확인할 수 있다.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.123-126
• /
• 2022

We investigated deep levels in n-type 4H-SiC epitaxy layer of the Positive-Intrinsic-Negative diode and Schottky barrier diodes by using deep level transient spectroscopy. Despite the excellent performance of 4H-SiC, research on various deep level defects still requires a lot of research to improve device performance. In Positive-Intrinsic-Negative diode, two defects of 196K and 628K are observed more than Schottky barrier diode. This is related to the action of impurity atoms infiltrating or occupying the 4H-SiC lattice in the ion implantation process. The I-V characteristics of the Positive-Intrinsic-Negative diode shows about ~100 times lower the leakage current level than Schottky barrier diode due to the grid structures in Positive-Intrinsic-Negative. As a result of comparing the capacitance of devices diode and Schottky barrier diode devices, it can be seen that the capacitance value lowered if it exists the P implantation regions from C-V characteristics.

• 전기전자학회논문지
• /
• 제17권4호
• /
• pp.428-433
• /
• 2013

본 논문에서는 전력반도체 소자의 재료로써 주목받고 있는 탄화규소 기반의 Trench MOS Barrier Schottky(TMBS)의 순방향 및 역방향 특성을 개선시키기 위한 구조를 제안한다. 순방향 전압강하와 역방향 항복전압을 개선시키기 위하여 사다리꼴 mesa 구조와 trench sidewall의 길이를 조절하는 기법을 사용하는 4H-SiC TMBS 정류기를 제안하고 있다. 제안된 구조는 사다리꼴 mesa 구조를 적용하여 trench sidewall에 경사를 줌으로써 1508V의 역방향 항복전압을 얻었다. 이것은 기존의 4H-SiC TMBS 정류기에 비하여 역방향 항복전압을 11% 개선시켰음을 나타낸다. 또한 trench sidewall 상단의 길이를 조절하여 순방향 전류 $200A/cm^2$에 대하여 12% 감소된 1.6V의 순방향 전압강하를 얻었다. 제안된 소자는 Silvaco사의 T-CAD를 사용하여 전기적 특성을 분석하였다.

• 전자공학회논문지A
• /
• 제31A권12호
• /
• pp.56-63
• /
• 1994

The effects of sulfur treatments on the barrier heithts of Schottky contacts and the interface-state density of metal-insulator-semiconductor (MIS) capacitors on InP have been investigated. Schottky contacts were formed by the evaporation of Al, Au, and Pt on n-InP substrate before and after (NH$_{4}$)$_{2}$S$_{x}$ treatments, respectively. The barrier height of InP Schottky contacts was measured by their current-voltage (I-V) and capacitance-voltage (C_V) characteristics. We observed that the barrier heights of Schottky contacks on bare InP were 0.35~0.45 eV nearly independent of the metal work function, which is known to be due to the surface Fermi level pinning. In the case of sulfur-treated Au/InP ar Pt/InP Schottky diodes, However, the barrier heights were not only increased above 0.7 eV but also highly dependent on the metal work function. We have also investigated effects of (NH$_{4}$)$_{2}$S$_{x}$ treatments on the distribution of interface states in Si$_{3}$N$_{4}$InP MIS diodes where Si$_{3}$N$_{4}$ was provided by plasma enhanced chemical vapor deposition (PECVD). The typical value of interface-state density extracted feom 1 MHz C-V curve of sulfur-treated SiN$_{x}$/InP MIS diodes was found to be the order of 5${\times}10^{10}cm^{2}eV^{1}$. This value is much lower than that of MiS diodes made on bare InP surface. It is certain, therefore, that the (NH$_{4}$)$_{2}$S$_{x}$ treatment is a very powerful tool to enhance the barrier heights of Au/n-InP and Pt/n-InP Schottky contacts and to reduce the density of interface states in SiN$_{x}$/InP MIS diode.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권2호
• /
• pp.141-146
• /
• 2002

The effect of the wide-bandgap Schottky barrier enhancement cap layer on the performance of metal-semiconductor-metal photodetectors (MSMPD's) is presented. Judged by the dc characteristics, no considerable increase in recombination loss of carriers is resulted by the incorporation of the cap layer. However, about 45% of the detection efficiency is lost for the cap-layered MSMPD's even with a graded layer incorporated under pulse operation, and it was found to be due mainly to the capturing and slow release of the photocarriers at the heterointerface. The loss mechanism of the pulse detection efficiency is believed to be responsible for the intersymbol interference and the increased bit-error-rate (BER) observed in MSMPD's when used with a high bit rate pseudo-random-bit-stream (PRBS) data pattern.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.355-355
• /
• 2010

We studied the dependence of the performance of schottky barrier metal-oxide-field effect transistors(SB MOSFETs) on the work function of source/drain metals. A strong impact of the various work functions and the light wavelengths on the transistor characteristics is found and explained using experimental data. We used an insulator of a high thickness (100nm) and back gate issues in SOI substrate, subthreshold swing was measured to 300~400[mV/dec] comparing with a ideal subthreshold swing of 60[mV/dec]. Excellent characteristics of Al/Si was demonstrated higher on/off current ratios of ${\sim}10^7$ than others. In addition, extensive photoresponse analysis has been performed using halogen and deuterium light sources(200<$\lambda$<2000nm).