• 제목/요약/키워드: School Dust

검색결과 539건 처리시간 0.031초

칼륨이온 공존 수용액 내 칼슘이온 제거를 위한 제올라이트 개질 연구 (A Study on the Modified Zeolite for the Removal of Calcium Ion in a Potassium Ion Coexistence Solution)

  • 이예환;김지유;이주열;박병현;김성수
    • 공업화학
    • /
    • 제30권6호
    • /
    • pp.726-730
    • /
    • 2019
  • 본 연구는 제올라이트를 이용한 칼슘이온 제거에 대한 것으로 시멘트 산업에서 발생하는 cement kiln dust를 이용한 CaCO3 제조 공정의 문제를 해결하기 위함이다. 칼슘이온을 제거하기 위하여 제올라이트를 개질하여 사용하였으며 결합 양이온 및 구조를 고려한 최적 제올라이트 선정, 칼슘이온 제거 성능 평가, 개질 용액의 종류 및 농도의 영향, K 공존 시 제거 선택도 평가에 대해 연구를 수행하였다. 5종의 제올라이트 중 13X 제올라이트의 칼슘 이온 제거 성능이 가장 우수함을 확인하였고 NaCl 대신 KCl을 개질 용액으로 사용하였을 때 칼슘이온 제거 성능이 증진되는 것을 확인할 수 있었다. 본 연구는 탄산화 공정의 문제 해결, 고농도의 KCl 회수 기술의 바탕이 될 것으로 판단된다.

방사성 금속폐기물의 용융시 방사성 핵종(60Co, 137Cs)의 분배특성 (Distribution Characteristics of Radionuclies (60Co, 137Cs) During the Melting of Radioactive Metal Waste)

  • 민병연;최왕규;오원진;정종헌;강용
    • Korean Chemical Engineering Research
    • /
    • 제45권6호
    • /
    • pp.627-632
    • /
    • 2007
  • 원자력 시설 해체시 발생되는 금속성 폐기물의 용융 제염을 위한 기초 연구를 위해 아크 용융로를 사용하여 스테인레스강과 탄소강의 금속 폐기물 용융시 슬래그 종류, 농도, 염기도에 따라 $^{60}Co$, $^{137}Cs$ 핵종의 주괴, 슬래그, 분진 상으로 분배 특성을 살펴보았다. $^{60}Co$은 90% 이상 주괴상에 균질하게 분포되었으며, 슬래그 상에는 약 10% 미만으로 잔존하며 슬래그 조성에 따라 분배특성이 크게 영향을 받지 않았으나, 유동성이 좋은 염기성 슬래그 형성제가 포함된 슬래그에서는 영향을 받음을 알 수 있었다. $^{137}Cs$는 스테인레스강과 탄소강의 용융체로부터 완전히 제거되어 슬래그상과 분진상 상으로 분배됨을 알 수 있었다.

천식질환이 있는 영유아가 환경요인 중 곰팡이 노출에 따른 영향 (Effect of environmental relationship between fungal exposure and asthma in children)

  • 최길용;김채봉
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2018년도 춘계 종합학술대회 논문집
    • /
    • pp.409-410
    • /
    • 2018
  • Background: Asthma is one of the most common chronic diseases and can be affected by environmental factors. It has been reported that exposure to indoor environmental factors can cause infantile asthma during infancy and childhood, but the previous studies are not yet clear. Climate change has recently been shown to increase indoor mold. Exposure to fungi is known to be directly related to the development of aggravation. Methods: This study was conducted from July 20, 2016 to September 30, 2016. The study was conducted on 90 household with children under the age of 7 who attend atopy school. The questionnaire surveyed allergic symptoms, social and demographic characteristics, and environmental characteristics. Environmentally hazardous substances were measured such as temperature, humidity, fine dust, volatile organic compounds, formaldehyde, bacteria, fungus, house dust mite, endotoxin. Results: According to the survey results, 9 patients (10%) were treated with asthma, 6 (6.7%) were asthmatic patients during the past 12 months, and 4 patients (4.4%) were asthmatic patients during the past 12 months. There were statistically significant differences in the direct effect of smokers in the family (P=0.0328). High-filter vacuum cleaners collected $0.4222CFU/m^3$ in subjects without asthma, and $0.2222CFU/m^3$ in subjects with asthma. In addition, various results confirmed that asthma exacerbated by mold exposure. Conclusions: The results of this study suggest that exposure to fungal by infants and toddlers may play an important role in the development of asthma. In this study, we investigated the relationship between asthma and fungal concentration.

  • PDF

아연의 제련 및 리사이클링 현황 (Current Status of Zinc Smelting and Recycling)

  • 손호상
    • 자원리싸이클링
    • /
    • 제28권5호
    • /
    • pp.30-41
    • /
    • 2019
  • 아연의 전세계 생산량은 약 1,300만 톤 정도이며, 철, 알루미늄, 구리에 이어서 네 번째로 많이 사용되는 금속이다. 아연을 리사이클링하여 2차지금을 생산하는 경우 광석으로부터 1차지금을 생산하는데 필요한 에너지의 약 75 %를 절약할 수 있으며, $CO_2$ 발생량은 약 40 %를 절감할 수 있다. 그러나 아연의 주 용도가 철강재의 도금용이기 때문에 아연의 리사이클링율은 약 25 % 수준으로 다른 금속보다 낮은 수준이다. 아연의 리사이클링 원료에는 제강분진, 황동 제조시에 발생하는 분진, 비철금속의 제조공정에서 발생하는 슬러지, 아연 잉곳의 재용해나 용융아연도금을 할때 생성되는 드로스, 폐건전지, 그리고 금속성 스크랩 등이 있다. 제강분진과 폐건전지가 가장 활발하게 리사이클링 되고 있다. 이러한 리사이클링 공정의 대부분은 건식제련법을 응용하고 있으나, 최근에는 건식과 습식의 복합처리에 관해서도 많은 관심이 주어져 있다.

철강제조업 생산직 남성 근로자의 건강행태에 관한 연구 (A Survey on Health Behavior of Male Workers in Steel Industry)

  • 하은희;임현술;위자형;곽정옥
    • Journal of Preventive Medicine and Public Health
    • /
    • 제29권1호
    • /
    • pp.113-131
    • /
    • 1996
  • This study was carried out to evaluate the relations among workers' general characteristics, work-related behaviors and health related behaviors in a steel industry with 1,134 workers in Pohang. The results were as follows; 1. The mean age of workers was 50 years old and working duration was 15 years and over. Most of them were married(94.5%) and had studied beyond high school (53.0%). They performed three shift work and most of them(63.0%) had experienced industial accidents. The frequency of noise and dust exposure was defined by a minimum of 6 hours per day, and workers complained about noise exposure(62.9%) and dust(55.6%). There were current smokers(67.7%), current drinkers(74.3%) and current exercising workers(32.3%) in the industry. The number of cigarette consumption in current drinkers was significantly high $(13.6{\pm}8.4\;pieces/day)$ and the alcohol consumption in current smokers was significantly high$(104.5{\pm}113.5\;g/wk)$. And the number of cigarette consumption of exercisers was significantly low and the alcohol consumption of exercisers was higher than non-exercisers. 3. The ratio of current smokers on frequent noise in exposed workers versus non-exposed workers was not significantly high but the current drinkers in frequent noise and dust exposed workers was significantly higher than non-exposed. 4. The normal levels of SGOT workers in non-smokers were significantly higher than in current smokers, and the normal levels of LFT (SGOT, SGPT, $\gamma-GTP$ workers in nondrinkers were significantly high. The normal levels of SBP and DBP workers in current smokers were not significantly high but were significantly high in non-drinkers. 5. The ratio of current smokers in voters unsatisfied with their job and working condition was higher than non-smokers, but the ratio of current drinkers in workers satisfied with their job and working condition were higher. 6. The significant factors for SGOT and $\gamma-GTP$ were age, the drinking amount and BMI. But the only significant factor for r-GTP was BMI. The significant factors for DBP were age, the alcohol consumption and BMI. And the significant factors for SBP were age, BMI.

  • PDF

석탄화력발전소 호흡성분진 작업환경 평가 전략 사례에 관한 연구 (A Study on Occupational Environment Assessment Strategies for Respirable Particulate Matter at Coal-Fired Power Plants )

  • 이은승;이윤근;신동일
    • 한국산업보건학회지
    • /
    • 제33권3호
    • /
    • pp.375-383
    • /
    • 2023
  • Objectives: Coal-fired power plants feature diverse working conditions, including multi-layered employment structures and irregular work cycles due to outsourcing and non-standardized tasks. The current uniform occupational environment measurement systems have limitations in accurately assessing and evaluating these varied conditions. This study aims to propose alternative measurement and assessment strategies to supplement existing methods. Methods: Major domestic coal-fired power plants were selected as the study targets. To prepare for the study and establish strategies, work processes were identified and existing occupational environment measurement results were compared and analyzed. The study proceeded by employing three strategies: specific exposure groups (SEGs) measurement, continuous monitoring, and supplementary measurements, which were then compared and discussed. Results: Previous exposure index evaluations (5,268 cases) indicated that crystalline silica, a type of respirable particulate matter, had detection limits below the threshold (non-detectable) in 82.6% (4,349 cases) of instances. Exposures below 10% of the exposure limit were observed at a very low concentration of 96.1%. Similar exposure group measurements yielded results where detection limits were below the threshold in 38.2% of cases, and exposures below 10% of the limit were observed in 70.6%. Continuous monitoring indicated detection limits below the threshold in 12.6% of cases, and exposures below 10% of the limit were observed in 75.6%. Instances requiring active workplace management accounted for more than 30% of cases, with SEGs at 11.8% (four cases), showing a higher proportion compared to 3.0% (four cases) in continuous monitoring. For coal dust, exposures below 10% of the limit were highest in legal measurements at 90.2% (113 cases), followed by 74.0% (91 cases) in continuous monitoring, and 47.0% (16 cases) in SEGs. Instances exceeding 30% were most prevalent in SEGs at 14.7% (five cases), followed by legal measurements at 5.0% (eight cases), and continuous monitoring at 2.4% (three cases). When examining exposure levels through arithmetic means, crystalline silica was found to be 104.7% higher in SEGs at 0.0088 mg/m3 compared to 0.0043 mg/m3 in continuous monitoring. Coal dust measurements were highest in SEGs at 0.1247 mg/m3, followed by 0.1224 mg/m3 in legal measurements, and 0.0935 mg/m3 in continuous monitoring. Conclusions: Strategies involving SEGs measurement and continuous monitoring can enhance measurement reliability in environments with irregular work processes and frequent fluctuations in working conditions, as observed in coal-fired power plants. These strategies reduce the likelihood of omitting or underestimating processes and enhance measurement accuracy. In particular, a significant reduction in detection limits below the threshold for crystalline silica was observed. Supplementary measurements can identify worker exposure characteristics, uncover potential risks in blind spots of management, and provide a complementary method for legal measurements.

한국 전자산업에서 작업환경측정을 통해 파악된 발암물질들 노출 특성과 발암물질관리 방안: 작업환경측정자료(2013-2017)를 중심으로 (Exposure of Carcinogens in Electronics Industries and Strategy for Control of Carcinogens: Using Work Environment Measurement Database (2013-2017) in Korea)

  • 손미아;윤재원;황유성;박미진;최민서;이미영;백도명
    • 한국산업보건학회지
    • /
    • 제32권4호
    • /
    • pp.302-324
    • /
    • 2022
  • Objectives: The objective of this study is to investigate exposure to occupational carcinogens in the nationwide electronics industries and to establish a strategy for control of occupational carcinogens in South Korea. Methods: We evaluated occupational carcinogens as defined by International Agency for Research on Cancer (IARC) using a nationwide work environment measurement database on the electronics industry in South Korea measured between 2013 and 2017 in accordance with the Occupational Safety and Health Act. Results: The number of occupational carcinogens found in the electronics industry in South Korea were: 20 for IARC Group 1, 14 for Group 2A, and 30 for Group 2B. The occupational carcinogens (Group 1) most frequently exposed were strong-inorganic-acid mists containing sulfuric acid (sulfuric acid), welding fumes, mineral oils (untreated or mildly treated), nickel compounds, silica dust, crystalline substances in the form of quartz or cristobalite, formaldehyde, arsenic and inorganic arsenic compounds, chromium (VI) compounds, trichloroethylene, cadmium and cadmium compounds, vinyl chloride, ethylene oxide, wood dust, beryllium and beryllium compounds, 1,3 butadiene, benzene, and others. Among them, the carcinogens (Group 1) exceeding the acceptable standard were trichloroethylene, formaldehyde, and ethylene oxide. The working environment measurement system as regulated by Occupational Safety and Health Act is not properly assessed and managed for occupational carcinogens in South Korea. A component analysis for all materials used should be set up to practically reduce occupational carcinogens. A ban on the use of occupational carcinogens and the development of alternative materials are needed. The occupational carcinogens below the acceptable standards should be carefully examined and a new standard for exposure needs to be established. Conclusions: The Occupational Safety and Health Act should be improved to identify and monitor occupational carcinogens at work sites. A strategy for occupational safety and health systems should be provided to give direction to workers' needs and right to know.

AKARI MID- TO FAR-INFRARED OBSERVATIONS OF DIFFUSE GALACTIC EMISSION

  • Sakon, I.;Onaka, T.;Mori, T.I.;Ohsawa, R.;Doi, Y.;Okada, Y.;Kaneda, H.;Ootsubo, T.
    • 천문학논총
    • /
    • 제27권4호
    • /
    • pp.213-216
    • /
    • 2012
  • We have collected dozens of mid-infrared spectra showing UIR bands from diffuse Galactic emitting regions with the AKARI's Infrared Camera (IRC) onboard AKARI, as part of the ISMGN Mission Program. The datasets cover various directions in the inner Galactic Plane ($|l|$ < 70 deg), in the outer Galactic Plane ($|l|$ > 70 deg), and in the off-Plane ($|b|$ > 2 deg). The variations in the UIR band ratios are examined in terms of the radiation environments judged from the far-infrared ($50-170{\mu}m$) spectral energy distribution (SED) made with AKARI/FIS All Sky Survey data at each slit position where mid-IR spectra were obtained. We have found that the band ratios of $6.2{\mu}m/11.2{\mu}m$ and $7.7{\mu}m/11.2{\mu}m$ toward the inner Galaxy are systematically higher than those toward the outer Galaxy and off the Galactic plane. Likely causes of the variations in properties of UIR bands in diffuse emission on a Galactic scale are discussed in this paper.

Molecular Characterization of A Novel Bacillus thuringiensis Strain from China

  • Qi Xu Feng;Li Ming Shun;Choi Jae Young;Kim Yang-Su;Wang Yong;Kang Joong Nam;Choi Heekyu;Je Yeon Ho;Song Ji Zhen;Li Jian Hong
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제11권1호
    • /
    • pp.57-61
    • /
    • 2005
  • A strain of Bacillus thuringiensis that showed signifi­cantly high toxicity to Plutella xylostella was isolated from a dust sample collected from Chinese tobacco warehouse and characterized. The isolate named B. thuringiensis LY-99 was determined to belong to subsp. alesti (H3a3c) by an H antisera agglutination test and produced bipyramidal inclusions. Plasmid and crystal protein patterns of the LY-99 were different from those of the reference strain, subsp. alesti. PCR analysis with specific primers revealed that this isolate contained abundant cry genes including crylAa, crylAc, crylB, crylD, crylE, crylF and cry2 genes, which was absolutely different from cry gene profile of the subsp. alesti. In addition, insecticidal activity of the LY-99 against P. xylostella larvae was about 44 times higher than that of the subsp. alesti.

Sensitization rates of airborne pollen and mold in children

  • Park, So-Hyun;Lim, Dae-Hyun;Son, Byong-Kwan;Kim, Jeong-Hee;Song, Young-Eun;Oh, In-Bo;Kim, Yang-Ho;Lee, Keun-Hwa;Kim, Su-Young;Hong, Sung-Chul
    • Clinical and Experimental Pediatrics
    • /
    • 제55권9호
    • /
    • pp.322-329
    • /
    • 2012
  • Purpose: Aeroallergens are important causative factors of allergic diseases. Previous studies on aeroallergen sensitization rates investigated patients groups that had visited pediatric allergy clinics. In contrast, we investigated sensitization rates in a general population group of elementary school to teenage students in Incheon, Jeju, and Ulsan. Methods: After obtaining parental consent, skin-prick tests were performed on 5,094 students between March and June 2010. Elementary school students were tested for 18 common aeroallergens, whereas middle and high school students were tested for 25 allergens. The 25 allergens included Dermatophagoides pteronyssinus, Dermatophagoides farinae, pollen (birch, alder, oak, Japanese cedar, pine, willow, elm, maple, Bermuda grass, timothy grass, rye grass, orchard grass, meadow grass, vernal grass, mugwort, Japanese hop, fat hen, ragweed, and plantain), and mold (Penicillatum, Aspergillus, Cladosporium, and Alternaria). Results: The sensitization rates in descending order were 25.79% (D. pteronyssinus ), 18.66% (D. farinae ), 6.20% (mugwort), and 4.07% (willow) in Incheon; 33.35% (D. pteronyssinus ), 24.78% (D. farinae), 15.36% (Japanese cedar), and 7.33% (Alternaria) in Jeju; and 32.79% (D. pteronyssinus), 30.27% (D. farinae), 10.13% (alder), and 8.68% (birch) in Ulsan. The dust mite allergen showed the highest sensitization rate among the 3 regions. The sensitization rate of tree pollen was the highest in Ulsan, whereas that of Alternaria was the highest in Jeju. The ragweed sensitization rates were 0.99% in Incheon, 1.07% in Jeju, and 0.81% in Ulsan. Conclusion: The differences in sensitization rates were because of different regional environmental conditions and distinct surrounding biological species. Hence, subsequent nationwide studies are required.