• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.12
• /
• pp.638-644
• /
• 2017

Optimal cooling operation algorithm was developed based on a simulation case of a single family house model equipped with renewable energy facility. EnergyPlus simulation results were used as virtual test data. The model contained three energy storage elements: thermal heat capacity of the living room, chilled water storage tank, and battery. Their charging and discharging schedules were optimized so that daily electricity bill became minimal. As an optimization tool, linear programming was considered because it was possible to obtain results in real time. For its adoption, EnergyPlus-based house model had to be linearly approximated. Results of this study revealed that dynamic cooling load of the living room could be approximated by a linear RC model. Scheduling based on the linear programming was then compared to that by a nonlinear optimization algorithm which was made using GenOpt developed by a national lab in USA. They showed quite similar performances. Therefore, linear programming can be a practical solution to optimal operation scheduling if linear dynamic models are tuned to simulate their real equivalents with reasonable accuracy.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.6
• /
• pp.2282-2303
• /
• 2021

To solve the problems of heavy computing load and system transmission pressure in energy internet (EI), we establish a three-tier cloud-edge integrated EI network based on a cloud-edge collaborative computing to achieve the tradeoff between energy consumption and the system delay. A joint optimization problem for resource allocation and task offloading in the threetier cloud-edge integrated EI network is formulated to minimize the total system cost under the constraints of the task scheduling binary variables of each sensor node, the maximum uplink transmit power of each sensor node, the limited computation capability of the sensor node and the maximum computation resource of each edge server, which is a Mixed Integer Non-linear Programming (MINLP) problem. To solve the problem, we propose a joint task offloading and resource allocation algorithm (JTOARA), which is decomposed into three subproblems including the uplink transmission power allocation sub-problem, the computation resource allocation sub-problem, and the offloading scheme selection subproblem. Then, the power allocation of each sensor node is achieved by bisection search algorithm, which has a fast convergence. While the computation resource allocation is derived by line optimization method and convex optimization theory. Finally, to achieve the optimal task offloading, we propose a cloud-edge collaborative computation offloading schemes based on game theory and prove the existence of Nash Equilibrium. The simulation results demonstrate that our proposed algorithm can improve output performance as comparing with the conventional algorithms, and its performance is close to the that of the enumerative algorithm.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.141-144
• /
• 2013

This paper presents a system called a Cash-flow based Construction Schedule Optimization system(CfSO). The existing CPM effectively handles schedule and cost management. However, funding strategy should be considered to obtain maximum profit and to progress a project favorably. One of measures is to coordinate the contract terms between owner and subcontractors (or suppliers). Contractor may decrease the interest cost attributed to project financing by adjusting the timing of cash-inflows and cash-outflows. It is an excellent method maximizing profits. This paper presents a method to estimate the amount of a cash-flow occurred periodically by integrating the terms of contract into scheduling. The proposed method is implemented as a system prototype in Microsoft Excel. This system provides a user an automated tool that identifies an optimal schedule that secures maximum profit by adjusting start and finish times of non-critical activities' free-floats without affecting on the project completion time. This system supports a project manager to establish an optimum project schedule and identifies profitable contractual conditions against to a construction owner.

• Journal of Communications and Networks
• /
• v.16 no.1
• /
• pp.36-44
• /
• 2014

Exploiting the energy-delay tradeoff for energy saving is critical for developing green wireless communication systems. In this paper, we investigate the delay-constrained energy-efficient packet transmission. We aim to minimize the energy consumption of multiple randomly arrived packets in an additive white Gaussian noise channel subject to individual packet delay constraints, by taking into account the practical on-off circuit power consumption at the transmitter. First, we consider the offline case, by assuming that the full packet arrival information is known a priori at the transmitter, and formulate the energy minimization problem as a non-convex optimization problem. By exploiting the specific problem structure, we propose an efficient scheduling algorithm to obtain the globally optimal solution. It is shown that the optimal solution consists of two types of scheduling intervals, namely "selected-off" and "always-on" intervals, which correspond to bits-per-joule energy efficiency maximization and "lazy scheduling" rate allocation, respectively. Next, we consider the practical online case where only causal packet arrival information is available. Inspired by the optimal offline solution, we propose a new online scheme. It is shown by simulations that the proposed online scheme has a comparable performance with the optimal offline one and outperforms the design without considering on-off circuit power as well as the other heuristically designed online schemes.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.801-803
• /
• 2005

Fundamentally, success of the competitive electricity market is dependent on efficient market design. However, since electricity incorporates various physical constraints as other commodities, the resource assignment (i.e., dispatch scheduling) is also one of requisites for the successful operation of electricity market. Therefore, efficient dispatch scheduling is an important issue to succeed in the deregulated electricity market and the efficiency of this electricity market may be considerably increased by systematic studies on dispatch scheduling algorithm and corresponding constraints, especially system security. Moreover, contrary to traditional vertically-integrated electric power industry condition, since various decision-makings in deregulated electricity market are directly connected with market participants' benefits, only rational dispatch scheduling algorithm can convince these participants. Therefore, it can provide a basis of grievance prevention. In this paper, we propose an algorithm for security constrained dispatch scheduling with respect to load curtailment. Proposed algorithm decomposes the dispatch problem into a master problem corresponding to basecase optimal power flow (OPF) and several subproblems corresponding a series of contingencies using two-stage optimization technique.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.6 s.336
• /
• pp.49-58
• /
• 2005

In this paper, we propose an optimal ILP scheduling algorithm for multiprocessor design on LDFG(Linear Data-Flow Graph) that can be represented by homogeneous synchronous data-flow. The proposed computation in this paper does not contain data-dependent, all scheduling decisions for such algorithms can be taken at compile time, only fully static overlapped schedules are considered. It means that all linear have the same schedule and the same processor assignment. In this paper, the resource-constrained problem is addressed, for the LDFG optimization for multiprocessor design problem formulating ILP solution available to provide optimal solution. The results show that the scheduling method is able to find good quality schedules in reasonable time.

• International Journal of Computer Science & Network Security
• /
• v.21 no.1
• /
• pp.19-26
• /
• 2021

CPU is considered the main and most important resource in the computer system. The CPU scheduling is defined as a procedure that determines which process will enter the CPU to be executed, and another process will be waiting for its turn to be performed. CPU management scheduling algorithms are the major service in the operating systems that fulfill the maximum utilization of the CPU. This article aims to review the studies on the CPU scheduling algorithms towards comparing which is the best algorithm. After we conducted a review of the Round Robin, Shortest Job First, First Come First Served, and Priority algorithms, we found that several researchers have suggested various ways to improve CPU optimization criteria through different algorithms to improve the waiting time, response time, and turnaround time but there is no algorithm is better in all criteria.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.4
• /
• pp.401-407
• /
• 2000

Modern microprocessors exploit instruction-level parallel processing to increase the performance. Especially VLIW processors supported by the parallelizing compiler are used more and more in specific applications such as high-end DSP and graphic processing. Bus-based VLIW architecture was proposed for these specific applications and it was designed to reduce the overhead of forwarding unit and the instruction width. In this paper, a optimizing scheduling compiler developed for the proposed bus-based VLIW processor is introduced. First, the method to model interconnections between buses and resource usage patterns is described. Then, on the basis of the modeling, machine-dependent optimization techniques such as bus-to-register promotion, copy coalescing and operand substitution were implemented. Optimization techniques for general-purpose VLIW microprocessors such as selective scheduling and enhanced pipelining scheduling(EPS) were also implemented. The experiment result shows about 20% performance gain for multimedia application benchmarks.

• Journal of the Korea Society for Simulation
• /
• v.32 no.3
• /
• pp.67-74
• /
• 2023

A semiconductor fabrication facility(FAB) is one of the most capital-intensive and large-scale manufacturing systems which operate under complex and uncertain constraints through hundreds of fabrication steps. To improve fab performance with intuitive scheduling, practitioners have used weighted-sum scheduling. Since the determination of weights in the scheduling significantly affects fab performance, they often rely on simulation-based decision making for obtaining optimal weights. However, a large-scale and high-fidelity simulation generally is time-intensive to evaluate with an exhaustive search. In this study, we investigated three sampling methods (i.e., Optimal latin hypercube sampling(OLHS), Genetic algorithm(GA), and Decision tree based sequential search(DSS)) for the optimization. Our simulation experiments demonstrate that: (1) three methods outperform greedy heuristics in performance metrics; (2) GA and DSS can be promising tools to accelerate the decision-making process.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1243-1258
• /
• 2017

A new medical materials scheduling system and its modeling method for the complex rescue are presented. Different from other similar system, first both the BeiDou Satellite Communication System (BSCS) and the Special Fiber-optic Communication Network (SFCN) are used to collect the rescue requirements and the location information of disaster areas. Then all these messages will be displayed in a special medical software terminal. After that the bipartite graph models are utilized to compute the optimal scheduling of medical materials. Finally, all these results will be transmitted back by the BSCS and the SFCN again to implement a fast guidance of medical rescue. The sole drug scheduling issue, the multiple drugs scheduling issue, and the backup-scheme selection issue are all utilized: the Kuhn-Munkres algorithm is used to realize the optimal matching of sole drug scheduling issue, the spectral clustering-based method is employed to calculate the optimal distribution of multiple drugs scheduling issue, and the similarity metric of neighboring matrix is utilized to realize the estimation of backup-scheme selection issue of medical materials. Many simulation analysis experiments and applications have proved the correctness of proposed technique and system.