• 제목/요약/키워드: Scenario Generation

검색결과 300건 처리시간 0.03초

Stochastic Channel Modeling for Railway Tunnel Scenarios at 25 GHz

  • He, Danping;Ai, Bo;Guan, Ke;Zhong, Zhangdui;Hui, Bing;Kim, Junhyeong;Chung, Heesang;Kim, Ilgyu
    • ETRI Journal
    • /
    • 제40권1호
    • /
    • pp.39-50
    • /
    • 2018
  • More people prefer using rail traffic for travel or for commuting owing to its convenience and flexibility. The railway scenario has become an important communication scenario in the fifth generation era. The communication system should be designed to support high-data-rate demands with seamless connectivity at a high mobility. In this paper, the channel characteristics are studied and modeled for the railway tunnel scenario with straight and curved route shapes. On the basis of measurements using the "Mobile Hotspot Network" system, a three-dimensional ray tracer (RT) is calibrated and validated for the target scenarios. More channel characteristics are explored via RT simulations at 25.25 GHz with a 500-MHz bandwidth. The key channel parameters are extracted, provided, and incorporated into a 3rd-Generation-Partnership-Project-like stochastic channel generator. The necessary channel information can be practically realized, which can support the link-level and system-level design of the communication system in similar scenarios.

계층적 사이버전 훈련 시나리오 저작 (Layered Authoring of Cyber Warfare Training Scenario)

  • 송의현;김동화;안명길
    • 인터넷정보학회논문지
    • /
    • 제21권1호
    • /
    • pp.191-199
    • /
    • 2020
  • 사이버전 훈련은 사이버전 역량 제고를 위한 핵심 수단이다. 일반적으로 사이버전 훈련은 시나리오에 의해 진행되며, 훈련의 질을 높여줄 수 있는 다양한 요소를 시나리오에 포함시킴으로써 훈련의 효과를 배가시킬 수 있다. 본 논문에서는 훈련 시나리오에 포함시킬 요소로 식별된 훈련 정보, 네트워크 맵, 트래픽 발생 정책, 위협/방어 행위를 소개하고, 이를 계층화하여 조합하는 방식으로 다양한 훈련 시나리오를 저작하는 방법을 제시한다. 그리고 각 시나리오 계층을 통합적으로 관리하기 위한 데이터베이스 설계를 제안한다. 계층적 훈련 시나리오 저작 방법은 기 저작된 계층들의 재사용을 통한 저작 편의성의 증대와, 계층 간의 다양한 조합을 바탕으로 훈련 시나리오를 확장시킬 수 있다는 장점을 가진다.

RECYCLING OPTION SEARCH FOR A 600-MWE SODIUM-COOLED TRANSMUTATION FAST REACTOR

  • LEE, YONG KYO;KIM, MYUNG HYUN
    • Nuclear Engineering and Technology
    • /
    • 제47권1호
    • /
    • pp.47-58
    • /
    • 2015
  • Four recycling scenarios involving pyroprocessing of spent fuel (SF) have been investigated for a 600-MWe transmutation sodium-cooled fast reactor (SFR), KALIMER. Performance evaluation was done with code system REBUS connected with TRANSX and TWODANT. Scenario Number 1 is the pyroprocessing of Canada deuterium uranium (CANDU) SF. Because the recycling of CANDU SF does not have any safety problems, the CANDU-Pyro-SFR system will be possible if the pyroprocessing capacity is large enough. Scenario Number 2 is a feasibility test of feed SF from a pressurized water reactor PWR. Thefsensitivity of cooling time before prior to pyro-processing was studied. As the cooling time sensitivity of cooling time before prior to pyro-processing was studied. As the cooling time increases, excess reactivity at the beginning of the equilibrium cycle (BOEC) decreases, thereby creating advantageous reactivity control and improving the transmutation performance of minor actinides. Scenario Number 3 is a case study for various levels of recovery factors of transuranic isotopes (TRUs). If long-lived fission products can be separated during pyroprocessing, the waste that is not recovered is classified as low- and intermediate-level waste, and it is sufficient to be disposed of in an underground site due to very low-heat-generation rate when the waste cooling time becomes >300 years at a TRU recovery factor of 99.9%. Scenario Number 4 is a case study for the recovery factor of rare earth (RE) isotopes. The RE isotope recovery factor should be lowered to ${\leq}20%$ in order to make sodium void reactivity less than <7$, which is the design limit of a metal fuel.

원자력과 신재생에너지 발전설비 확대에 따른 온실가스 저감 잠재량에 관한 연구 (Assessment of GHG Emission Reduction Potential in Extension of Nuclear and Renewable Energy Electricity Generation)

  • 전수영;박상원;송호준;박진원
    • 에너지공학
    • /
    • 제18권3호
    • /
    • pp.191-202
    • /
    • 2009
  • 2005년 2월 교토의정서가 효력을 발휘하게 됨에 따라 우리나라는 세계 10위의 이산화탄소 배출국으로서 2013년 이후에는 감축의무를 지어야 할 실정이다. 특히 온실가스 배출량의 약 30%가 발전부문에 의한 것이므로 전환부문의 에너지 소비 저감은 매우 중요하다. 이에 정부는 온실가스 감축환경에 대응하기 위하여 "제1차 국가에너지기본계획"을 발표하여 원전설비를 2030년까지 최대 41%까지 확대하고, 신재생에너지보급률 또한 11%로 높이겠다는 목표를 내세웠다. 이에 근거하여 원자력과 신재생에너지발전설비를 확대하였을 경우 온실가스 저감 잠재량과 그 유효성을 LEAP(Long-range Energy Alternative Planing system)을 이용하여 정량적으로 분석하였다. 분석결과 2030년 기준으로 총 $CO_2$ 발생 저감률은 28.8% 였다. 또한 BAU 시나리오 발전량을 토대로 하였을 때 유연탄발전 $0.85\;kgCO_2/kWh$, LNG발전 $0.51\;kgCO_2/kWh$의 단위 발전량당 온실가스 배출량을 보였다. 따라서 기존설비를 대체할 시, 유연탄발전을 대체할 경우에 온실가스 저감 효과가 크다는 결론을 보였다.

차세대 이동통신 서비스 분류 및 분석 (Classification and Analysis of Next Generation Mobile Communications Services)

  • 김승목;박태근
    • 한국멀티미디어학회논문지
    • /
    • 제10권4호
    • /
    • pp.470-482
    • /
    • 2007
  • 본 논문에서는 NGMC 포럼의 차세대 이동 통신 서비스 로드맵 작성을 위하여 차세대 이동 통신 서비스들을 카테고리별로 분류하고 서비스 진화 시나리오를 작성한다. 구체적으로, 사용 목적에 따라 차세대 이동 통신서비스 카테고리를 선정하고, 해당 카테고리 별로 서비스들을 분류한 뒤, 각 서비스들의 상관 관계를 분석하여 카테고리별 서비스 진화 시나리오를 작성한다. 분류 및 분석 대상 서비스는 현재 제공되고 있는 서비스뿐만 아니라 개념적인 수준에서 논의되고 있는 모든 종류의 서비스들 중에서 선정된다. 본 논문의 결과물인 카테고리별 서비스 진화 시나리오를 이용하여 차세대 이동통신 서비스 로드맵이 완성된다면, 차세대 이동 통신분야에서의 주도권 확보 및 경쟁력 증대에 기여할 수 있을 것으로 기대된다.

  • PDF

시나리오를 이용한 객체지향 시스템의 통합 테스트 (Integrated Test of Object-Oriented System Using Scenario)

  • 김은주;최은만
    • 한국정보처리학회논문지
    • /
    • 제5권9호
    • /
    • pp.2312-2322
    • /
    • 1998
  • 객체 지향 시스템의 통합 테스트를 위한 테스트 케이스는 Method/Message의 경로와 method의 실행에 따른 시스템의 상태를 포함하여야 한다. 이런 테스트 케이스를 추출하기 위해서는 원시 코드만으로는 부족하고 시스템의 동적 모델링 단계에서 사용되었던 시나리오를 이용하여야 한다. 그 이유는 시나리오를 이용할 경우 사용자가 시스템에 행할 수 있는 동작의 종속성 분석을 통하여 테스트 케이스의 수를 줄일 수 있기 때문이다. 본 논문에서는 시나리오를 객체 지향 시스템의 통합 테스트에 활용하는 방안에 대하여 연구하였다. 이 방안을 이용하면 객체간의 상호작용을 테스트하기 위한 테스트 케이스의 생과 테스트 결과의 비교를 컴퓨터를 이용하여 할 수 있고 테스트 케이스의 수도 줄일 수 있다.

  • PDF

시스템 아키텍처 설계 방법론에 기반한 무인운전 경량전철 차량의 화재대응 시나리오 생성에 관한 연구 (A Study on the Fire Response Scenarios Generation of Unmanned Light Rail Transit with Systems Engineering Architecture Design Methodology)

  • 한석윤;김주욱;김영민
    • 대한안전경영과학회지
    • /
    • 제17권1호
    • /
    • pp.33-43
    • /
    • 2015
  • Modern systems development becomes more and more complicated due to the need on the ever-increasing capability of the systems. In addition to the complexity issue, safety concern is also increasing since the malfunctions of the systems under development may result in the accidents in both the test and evaluation phase and the operation phase. Light rail transit(LRT) with passenger capacity between bus and subway is driven by an unmanned control, so safety issues of LRT in emergency shall be considered more carefully than other rolling stock. Modern railway system is a complex system and many actions in emergency are required. In this view, interoperability approach is effective to identify the related elements in emergency. In this paper, we propose the method to generate the fire response scenario of unmann ed LRT based on the outputs of systems engineering architecture design methodology. The proposed method is could be contributed to establish more reliable and applicable fire response scenario.

도시계획단계에서의 에너지 플랜트 선정을 위한 평가방안 제시 및 적용 (The Suggestion and application of the Evaluation Method for Selecting Energy Plant on City Planning Step)

  • 박진영;박률;이정재
    • 한국태양에너지학회 논문집
    • /
    • 제32권4호
    • /
    • pp.34-42
    • /
    • 2012
  • The forecasted energy shortage tends to encourage to develop the next generation energy to countermove the energy problems and the climatic change all over the world. Korean government is pushing ahead with the policy for 'Low Carbon Green Growth' to deal with climate changes and to overcome energy problems. And many studies for low carbon green city or zero carbon city have been progressed. In this study, energy plants and energy scenarios are selected by energy supply suited features of city at city plan. The method to evaluate energy scenario can be proposed to apply various energy plants for energy demand on city planning step and evaluation method can be systematized to be used by users. Also the calculated values are changed into index for comparison according to each energy scenario.

Energy System Management 모형을 통한 통합 수요관리 효과분석에 관한 연구 (A Study on Effect Analysis of Integrated Demand Management According to Energy System Management Model)

  • 김용하;조현미;김영길;박화용;김형중;우성민
    • 전기학회논문지
    • /
    • 제60권7호
    • /
    • pp.1339-1346
    • /
    • 2011
  • This paper is developed to demand management scenario of energy consumption efficiency improvement, electricity generation efficiency improvement, network efficiency improvement, change of distribution ratio, movement of energy source, change of heating system, put of CHP to quantitatively assess to impact on energy use of demand management at the national level. This scenario can be applied Energy System Management model was developed based on Energy Balance Flow. In addition, effect analysis through built demand management scenario was quantitatively evaluated integrated demand management effectiveness of energy cost saving, CO2 emission reduction and energy savings of national level by calculating to primary energy source usage change in terms of integration demand management effect more often than not a single energy source separated electricity, heat and gas.

Tag Anti-Collision Algorithms in Passive and Semi-passive RFID Systems -Part II : CHI Algorithm and Hybrid Q Algorithm by using Chebyshev's Inequality-

  • 범효;송인찬;장경희;신동범;이형섭
    • 한국통신학회논문지
    • /
    • 제33권8A호
    • /
    • pp.805-814
    • /
    • 2008
  • Both EPCglobal Generation-2 (Gen2) for passive RFID systems and Intelleflex for semi-passive RFID systems use probabilistic slotted ALOHA with Q algorithm, which is a kind of dynamic framed slotted ALOHA (DFSA), as the tag anti-collision algorithm. A better tag anti-collision algorithm can reduce collisions so as to increase the efficiency of tag identification. In this paper, we introduce and analyze the estimation methods of the number of slots and tags for DFSA. To increase the efficiency of tag identification, we propose two new tag anti-collision algorithms, which are Chebyshev's inequality (CHI) algorithm and hybrid Q algorithm, and compare them with the conventional Q algorithm and adaptive adjustable framed Q (AAFQ) algorithm, which is mentioned in Part I. The simulation results show that AAFQ performs the best in Gen2 scenario. However, in Intelleflex scenario the proposed hybrid Q algorithm is the best. That is, hybrid Q provides the minimum identification time, shows the more consistent collision ratio, and maximizes throughput and system efficiency in Intelleflex scenario.