• Title/Summary/Keyword: Scaling up

Search Result 343, Processing Time 0.026 seconds

Development of LPAKO : Software of Simplex Method for Liner Programming (단체법 프로그램 LPAKO 개발에 관한 연구)

  • 박순달;김우제;박찬규;임성묵
    • Korean Management Science Review
    • /
    • v.15 no.1
    • /
    • pp.49-62
    • /
    • 1998
  • The purpose of this paper is to develope a large-scale simplex method program LPAKO. Various up-to-date techniques are argued and implemented. In LPAKO, basis matrices are stored in a LU factorized form, and Reid's method is used to update LU maintaining high sparsity and numerical stability, and further Markowitz's ordering is used in factorizing a basis matrix into a sparse LU form. As the data structures of basis matrix, Gustavson's data structure and row-column linked list structure are considered. The various criteria for reinversion are also discussed. The dynamic steepest-edge simplex algorithm is used for selection of an entering variable, and a new variation of the MINOS' perturbation technique is suggested for the resolution of degeneracy. Many preprocessing and scaling techniques are implemented. In addition, a new, effective initial basis construction method are suggested, and the criteria for optimality and infeasibility are suggested respectively. Finally, LPAKO is compared with MINOS by test results.

  • PDF

Small scale experimental testing to verify the effectiveness of the base isolation and tuned mass dampers combined control strategy

  • Petti, Luigi;Giannattasio, Giovanni;De Iuliis, Massimiliano;Palazzo, Bruno
    • Smart Structures and Systems
    • /
    • v.6 no.1
    • /
    • pp.57-72
    • /
    • 2010
  • This paper presents the most significant results obtained within a broad-ranging experimental program aiming to evaluate both the effectiveness and the robustness of a Base Isolation (BIS) and a Tuned Mass Damper (TMD) combined control strategy (BI & TMD). Following a brief description of the experimental model set-up and the adopted kinematic scaling technique, this paper describes the identification procedures carried out to characterize the system''s model. The dynamic response of a small-scale model to recorded earthquake excitations, which has been scaled by using the Buckingham pi-theorem, are later presented and discussed. Finally, the effectiveness and robustness of the combined control strategy is evaluated by comparing the model's dynamic response. In particular, reduction in relative displacements and absolute accelerations due to the application of different mass damping systems is investigated.

Robotic Lateral Compartment Selective Neck Dissection in Well-Differentiated Thyroid Carcinoma (갑상선 분화암에서 로봇을 이용한 측경부 림프절 절제술)

  • Tae, Kyung
    • Korean Journal of Bronchoesophagology
    • /
    • v.17 no.2
    • /
    • pp.83-88
    • /
    • 2011
  • Robotic thyroidectomy has been developed to minimize neck scarring, and several authors have described its feasibility and safety, and have reported surgical outcomes comparable with conventional open thyroidectomy. The da Vinci surgical system robot provides a three-dimensional $10-12{\times}$magnified view of the surgical area. It also provides hand-tremor filtration, fine motion scaling, and precise and multi-articulated hand-like motions. Recently, robotic technology has also been applied to lateral compartment neck dissection in thyroid cancer. We have developed a new novel selective neck dissection procedure by a gasless unilateral axillo-breast (GUAB) approach with a da Vinci Surgical System for well-differentiated thyroid carcinoma to avoid a long visible neck scar. Based on our early experience, robotic selective neck dissection by GUAB approach is a safe, feasible and cosmetically excellent procedure. It can be an alternative to conventional open surgery in the highly selected patients with well-differentiated thyroid carcinoma. The oncologic safety of robotic selective neck dissection should be verified with long-term follow-up data.

  • PDF

MDS-based Localization Reflecting Depth, Temperature, and Salinity of Ocean in Underwater Acoustic Sensor Networks(UWASNs) (수중 센서 네트워크에서 수심, 수온, 염도를 고려한 환경에서 MDS를 이용한 위치인식 연구)

  • Jung, Hui-Sok;Kim, Eun-Chan;Yang, Yeon-Mo
    • IEMEK Journal of Embedded Systems and Applications
    • /
    • v.7 no.4
    • /
    • pp.187-191
    • /
    • 2012
  • In these days, there are huge increases of concerning underwater acoustic sensor networks (UWASNs) to explore marine resources and to monitor climate change. To collect information from sensor nodes which are randomly deployed in underwater, Multi-Dimensional Scaling (MDS) based locating methods have been recently introduced, which consider sound speed to be constant in underwater. However, underwater sound speed tends to vary depending on underwater environment factors, such as depth, temperature, and salinity. In this paper, we propose a method considering environment factors, can influence upon sound speed in underwater, and introduce experimental setup which can follow up environmental factors.

Existence of a vortex-glass phase transition in an optimally doped BaFe1.8Co0.2As2 single crystal

  • Choi, Ki-Young;Kim, Kee Hoon
    • Progress in Superconductivity and Cryogenics
    • /
    • v.15 no.2
    • /
    • pp.16-19
    • /
    • 2013
  • The magneto-resistivity and electric field-current density (E-J) curves were investigated up to a magnetic field 9 T in the optimally doped $BaFe_{1.8}Co_{0.2}As_2$ single crystal with a superconducting temperature ($T_c$) of 24.6 K. The E-J Scaling behaviors below and above vortex glass transition temperature ($T_g$) were found, confirming the existence of the vortex glass phase transition. The critical exponents for the diverging spatial and time correlations at $T_g$, were obtained as v = $1.1{\pm}0.1$ and z = $4.5{\pm}0.3$, respectively. The obtained critical exponents are in good agreement with the predicted values of v ~ 1 - 2 and z > 4 within the 3D vortex glass theory.

Joint stress based deflection limits for transmission line towers

  • Gayathri, B.;Ramalingam, Raghavan
    • Steel and Composite Structures
    • /
    • v.26 no.1
    • /
    • pp.45-53
    • /
    • 2018
  • Experimental investigations have revealed significant mismatches between analytical estimates and experimentally measured deflections of transmission towers. These are attributed to bolt slip and joint flexibility. This study focuses on effects of joint flexibility on tower deflections and proposes criterions for permissible deflection limits based on the stresses in joints. The objective has been framed given that guidelines are not available in the codes of practices for transmission towers with regard to the permissible limits of deflection. The analysis procedure is geometric and material nonlinear with consideration of joint flexibility in the form of extension or contraction of the cover plates. The deflections due to bolt slip are included in the study by scaling up the deflections obtained from analysis by a factor. Using the results of the analysis, deflection limits for the towers are proposed by limiting the stresses in the joints. The obtained limits are then applied to a new full scale tower to demonstrate the application of the current study.

ON THE C-PROJECTIVE VECTOR FIELDS ON RANDERS SPACES

  • Rafie-Rad, Mehdi;Shirafkan, Azadeh
    • Journal of the Korean Mathematical Society
    • /
    • v.57 no.4
    • /
    • pp.1005-1018
    • /
    • 2020
  • A characterization of the C-projective vector fields on a Randers space is presented in terms of 𝚵-curvature. It is proved that the 𝚵-curvature is invariant for C-projective vector fields. The dimension of the algebra of the C-projective vector fields on an n-dimensional Randers space is at most n(n + 2). The generalized Funk metrics on the n-dimensional Euclidean unit ball 𝔹n(1) are shown to be explicit examples of the Randers metrics with a C-projective algebra of maximum dimension n(n+2). Then, it is also proved that an n-dimensional Randers space has a C-projective algebra of maximum dimension n(n + 2) if and only if it is locally Minkowskian or (up to re-scaling) locally isometric to the generalized Funk metric. A new projective invariant is also introduced.

Soluble expression and purification of synthetic human bone morphogenetic protein-2 in Escherichia coli

  • Ihm, Hyo-Jin;Yang, Seung-Ju;Huh, Jae-Wan;Choi, Soo-Young;Cho, Sung-Woo
    • BMB Reports
    • /
    • v.41 no.5
    • /
    • pp.404-407
    • /
    • 2008
  • A 345-bp gene that encodes human bone morphogenetic protein-2 (hBMP-2) has been synthesized. The codon usage of the resulting gene was modified to include those triplets that are utilized in highly expressed Escherichia coli genes. The hBMP-2 gene was efficiently expressed in E. coli as a soluble and active protein. Since the recombinant hBMP-2 was readily solublized, no further solublization steps were required throughout purification. No additional tagging residues were introduced into the synthetic hBMP-2 gene product. The developed synthetic gene is a promising approach for scaling-up the soluble expression of hBMP-2.

Wind Tunnel Experiments for Studying Atmospheric Dispersion in the Complex Terrain II. Gaussian Modeling of Experiments in a Moutainous Area (복잡한 지형내 오염물질의 대기확산 풍동실험 I I. 산지지형 실험의 Gaussian 모델링)

  • 김영성;경남호
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.11 no.2
    • /
    • pp.145-152
    • /
    • 1995
  • Predictability of a Gaussian model, ISCST2 was assessed by scaling up wind tunnel experiments with a 1/3,000 terrain model to the real scale. Concentration profiles obtained from the flat-terrain experiment in the neutral condition were estimated to be in agreement with the calculated ones from ISCST2 in the stability class A, but the difference between the two was still large. Concentration profiles from the mountainous-terrain experiments were better fitted to the calculated ones primarily because in the experiment, concentration behind the source was raised due to the effect of a hill in the upstream side. Model prediction was improved with including the downwash effect of buildings and the hill, but overall concentration profiles were not much different from a typical Gaussian profile. While concentration profiles in the experiments were changed with local flows by varying the wind direction and the topography, those from the Gaussian modeling were mot freely changed together with these variations.

  • PDF

확률화응답에 대한 대수선형모형

  • 최경호
    • Communications for Statistical Applications and Methods
    • /
    • v.4 no.3
    • /
    • pp.725-734
    • /
    • 1997
  • 많은 사회과학 조사에서 분할표 형태로 얻어진 범주형 자료에는 오분류(misclassification)로 인한 오차가 내재되는 경우가 종종 있다. 질적속성 추정을 위한 확률화응답은 이러한 오분류 문제의 한 특수한 경우로 여겨지기도 한다. 그래서 확률화응답을 통한 범주형자료는 혼합된 분할표(mixed-up contingency table)로 여길 수 있는 바, 본 논문에서는 이에 대해 대수선형모형(log-linear model)을 설정하고 Chen과 Fienberg(1976)의 Iterative scaling procedure(ISP)에 의하여 얻어진 최우추정량의 극한을 이용하였다. 이 결과 Warner(1965) 형태의 대칭기법에 대해서는 Singh(1976)에 의하여 제안된 최우추정량과 같아지게 됨을 보임으로써 Warner에 의해서 제시된 추정량이 최우추정량으로 적절하지 않음을 확인해 보고, 무관질문기법에 대해서는 Greenberg, et al.(1969)에 의해서 제안된 추정량이 추정의 관점에서 최우추정량으로 적절하지 않음을 알아 보았다.

  • PDF