• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.1117-1124
• /
• 2018

Contrast enhancement plays an important role in various computer vision systems, since their usability can be improved with visibility enhancement of the images affected by weather and lighting conditions. This paper introduces a histogram modification algorithm that reflects the properties of original images in order to eliminate the saturation effect and washed-out of image details due to the over-enhancement. Our method modifies the original histogram so that an additive term fill histogram pits and the gamma correction suppresses histogram spikes. The parameters for the additive term and gamma correction are adjusted automatically according to statistical properties of the images. Experimental results for various low contrast and hazy images demonstrate that the proposed contrast enhancement improves visibility and reduces haze components effectively, while preserving the characteristics of original images, than the conventional methods.

• Journal of Korean Society of Forest Science
• /
• v.96 no.2
• /
• pp.214-221
• /
• 2007

The effect of nutrient availability and forest type on the nutrient turnover of fine roots is important in terrestrial nutrient cycling, but it is poorly understood. I measured nutrient turnover of hardwoods and softwoods at three well studied sites in the northeastern US: Sleepers River, VT; Hubbard Brook, NH; Cone Pond, NH. Significant differences in nutrient turnover by fine roots were observed among sites, but not between forest types. The magnitude of differences for each element ranged from 3 times for P and N to 8 times for Ca and Mg between sites. Smaller differences of 0.2 to 0.8 times were observed between forest types. In hardwoods, the Sleepers River 'new' site had $23kg\;ha^{-1}\;yr^{-1}$ Ca, $7kg\;ha^{-1}\;yr^{-1}$ Mg, and $16kg\;ha^{-1}\;yr^{-1}$ K turnover, owing to high root nutrient contents and turnover. Cone Pond had the highest turnover for Mn ($0.8kg\;ha^{-1}\;yr^{-1}$) and Al ($16kg\;ha^{-1}\;yr^{-1}$), owing to high nutrient contents. The Hubbard Brook hardwood site exhibited the lowest turnover of these elements. In softwoods, the variation in turnover of Ca, Mg, and K was lower than in hardwoods. The Hubbard Brook had the highest turnover for P ($1.6kg\;ha^{-1}\;yr^{-1}$), N ($31kg\;ha^{-1}\;yr^{-1}$), Mn ($0.4kg\;ha^{-1}\;yr^{-1}$), Al ($10kg\;ha^{-1}\;yr^{-1}$), Fe ($6.4kg\;ha^{-1}\;yr^{-1}$), Zn ($0.3kg\;ha^{-1}\;yr^{-1}$), Cu ($34g\;ha^{-1}\;yr^{-1}$), and C ($1.1Mg\;ha^{-1}\;yr^{-1}$). Root Ca turnover exponentially increased as soil percentage Ca saturation increased because of greater root nutrient contents and more rapid turnover at the higher Ca sites. These results imply that nutrient inputs by root turnover significantly increase as soil Ca availability improves in temperate forest ecosystems.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.4
• /
• pp.295-302
• /
• 2008

This paper examines the design and the performance of a PMA-RSM(permanent-magnet assisted reluctance synchronous motor) for washing machine. A FEM(finite element method) is used to analyze performance and maximum torque characteristic of the proposed PMA-RSM. The designed motor is a combination of salient poles, which is making reluctance torque, and permanent magnet which are located on the air-gap of rotor to get a enough torque during low speed resign. Typical flux barrier type reluctance synchronous motor and the effects of adding magnet into the flux barrier of the rotor of a PMA-RSM are compared and examined. Also the maximum torque point of the reluctance torque by reluctance and reaction torque by magnetic alignment torque, which is in barrier, of the proposed PMS-RSM are derived through simulation. Using this results, the characteristics analysis of a performance, an average torque and a torque ripple of flux barrier RSM and the proposed PMA-RSM are performed through FEM under the saturation effect respectively.

• Korean Journal of Community Nutrition
• /
• v.5 no.2
• /
• pp.243-252
• /
• 2000

This study examined the effects of excess intake of calcium(Ca) and iron(Fe) supplements on iron bioavailability, liver and kidney functions in anemic model rats. Seven-week-old female rats were first fed and Fe-deficient diet for ten weeks, and then fed one of nine experimental diets for an additional eight weeks, containing three levels of Ca, normal (0.5%) or high(1.5%) or excess (2.5%) and three levels of Fe, normal(35ppm) or high(210 ppm) or excess(350ppm). In anemic model rats, serum Fe, total iron binding capacity(TIBC), hemogolin(Hb), hematocrit(Hct) and liver Fe contents were significantly decreased. Apparent Fe absorption significantly increased with increasing dietary Fe levels, and decreased with increasing dietary Ca levels. serum Fe concentration significantly increased in rats fed a high- and excess-Fe diet, and decreased in rats fed a excess-Ca diet. TIBC was decreawed in rats fed a excess-Ca diet, and transferrin saturation(%) increased in rats fed ahigh- and excess-Fe diet. Hb and Hct were decreased in rats fed an excess-Ca diet regardless of dietary Fe levels. Fe and thiobarbituric acid reactin gsubstance(TBARS) Contents of liver significantly increased in rats fed a high- and excess0-Fe diet, and decreased in rats fed a high- and excess-Ca diet. Fe content of the spleen showed similar results. Urinary creatinine and GFR increased in rats fed an excess-Ca diet regardless of dietary Fe levels. GOT, GPT and LDH were not significantly affected by dietary Ca and Fe levels. These results suggest that excess intake of Fe may increase liver Fe deposits and TBARS, and excess intake of Ca may decrease Fe bioavailability and kidney function leading to potential health problems in anemic model rats.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.477-486
• /
• 2017

For the analysis of the optical characteristics of electrodeless lamps, all the lamp surface temperatures have been treated the same. However, the interpretation of optical properties in this way has not been sufficient in terms of accuracy. In this paper, to overcome this problem, we divided the inside of the bulb into two parts, hot spot and cold spot, and analyzed the density difference of mercury by different temperatures. Here, it is assumed that the distribution of temperature and density is linear. The effect of optical characteristics through redistribution of hot spot and cold spot density was analyzed. It was also confirmed that the ratio of the density of the redistributed discharge gas has a great influence on the saturation of the optical characteristics. Therefore, it is proved that the design method through the domestic setting is very useful in the actual design, and the method for shortening the time for stabilizing the optical characteristics is obtained.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.142-145
• /
• 2017

Users of Smartphone in Korea are using the majority of the economically active population over 99% and experts have seen that they have reached saturation after the initial formation stages. The purpose of this study is to investigate the influencing factors of dominant design attributes on the intention of continuous use of Smartphone users. Predictor factors were selected perceived usefulness and perceived ease of use suggested on extended the technology acceptance model. The concept model was completed by selecting the dominant design attribute as a mediator. Participants of this study were 150 Smartphone users in Busan Gyeongnam and Iksan Jeonbuk province in accordance with convenience sampling. IBM SPSS Statistics 19 were employed for descriptive statistics, Smart PLS (partial least squares) was employed for confirmatory factor analysis and path analysis of casual relationship among variables and effect. Analytical results show that all paths of continue usage intention are significant. This study suggests practical and theoretical implications based on the results.

• Resources Recycling
• /
• v.7 no.4
• /
• pp.43-49
• /
• 1998

We investigated the effects of the powder characteristics of various domestic iron oxides (${\alpha}Fe_2O_3$) on the magnetic properties of Sr-ferrites The particle size and the distribution of iron oxides were classified hy three different rerinning methods, and greatly a affected on the magn$\xi$tic prope$\pi$ies and the mmphology of Sr-ferntes. The agglomeration of Ruthner iron oxides and the large particles of Chemirite (CY) above $0.80{\mu}\textrm{m}$ were degraded the prope며es of Sr-fcrrites. The optimal magnetic prope$\pi$ies of Srt territes, showing 68.2 emu/g of saturation magnetization and 4300 Oe of intrinsic coerClvity, were achieved at the following c conditions; Chemirite (P2EP) iron oxides of $0.14{\mu}\textrm{m}$ molar ratio of 5.8. and calcination of $1150^{\circ}C$/1 hr.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.467-468
• /
• 2006

We report on the fabrication of P3HT-based thin-film transistors (TFT) that consist of indium-zinc-oxide (IZO), PVP (poly-vinyl phenol), and Ni for the source-drain (S/D) electrode, gate dielectric, and gate electrode, respectively. The IZO S/D electrodes of which the work function is well matched to that of P3HT were deposited on a P3HT channel by thermal evaporation of IZO and showed a moderately low but still effective transmittance of ~25% in the visible range along with a good sheet resistance of ${\sim}60{\Omega}/{\square}$. The maximum saturation current of our P3HT-based TFT was about $15{\mu}A$ at a gate bias of -40V showing a high field effect mobility of $0.05cm^2/Vs$ in the dark, and the on/off current ratio of our TFT was about $5{\times}10^5$. It is concluded that jointly adopting IZO for the S/D electrode and PVP for gate dielectric realizes a high-quality P3HT-based TFT.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.6
• /
• pp.458-462
• /
• 2011

Soution-processed ZrInZnO (ZIZO) thin-film transistors (TFTs) with varying Zr content were fabricated. The ZIZO TFT (Zr=20 at. %/Zn) has an optimal performance with the saturation field effect mobility of 0.77 $cm^2/Vs$, the threshold voltage (Vth) of 2.1 V, the on/off ratio of $4.95{\times}10^6$, and subthreshold swing (S.S) of 0.73 V/decade. Using this optimized ZIZO TFT, the positive and negative gate bias stress according to annealing temperature was also investigated. While the Vth shifts dramatically after 1,000 s of both gate bias stresses, variations in the S.S are negligible. It suggests that electrons or holes are tem porarily trapped in the gate insulator, the semiconductor, or the interface between both layers.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.3
• /
• pp.111-122
• /
• 2014

Partitioning interwell tracer test (PITT) is a method to quantify and qualify a site contaminated with NAPLs (Non-Aqueous Phase Liquids). Analytical description of PITT assumes that the injection-pumping well pair is on the line of the ambient groundwater flow direction, but the test-well pair could frequently be off the line in a real field site, which could be an erroneous factor in analyzing PITT data. The purpose of this work is to study the influence of the angle of the test-well pair on the ambient groundwater flow direction based on the result from PITT. From the experiments, it was found that the obliqueness of the test-well pair to the ambient groundwater flow direction could affect the tracer test resulting in a decreased NAPL estimation efficiency. In case of an oblique arrangement of the test-well pair to the ambient flow direction, it was found that the injection of a chase fluid could enhance the estimation efficiency. An increase of the pumping rate could enhance the recovery rate but it cannot be said that a high pumping rate can increase the test efficiency because a high pumping rate cannot give partitioning tracers enough time to partition into NAPLs. The results have a implication that because the arrangement of the test-well pair is a controlling factor in performing and interpreting PITT in the field in addition to the known factors such as heterogeneity and the source zone architecture, flow direction should be seriously considered in arranging test-well pair.