• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제27권3호
• /
• pp.168-175
• /
• 2024

Purpose: The presence of alcoholic stool in biliary atresia (BA) patients is the basis of a stool color card (SCC), a screening tool that has led to more patients receiving Kasai portoenterostomy earlier. This study aimed to evaluate the color image processing of stool images captured using smartphones. We propose that measuring digital color parameters is a more objective method for identifying BA stools and may improve the sensitivity of BA screening. Methods: A prospective study was conducted in five hospitals in Thailand between October 1, 2020, and December 31, 2021. Stools from infants presenting with jaundice, acholic stool, or dark-colored urine were photographed. Digital image color analysis was performed, and software was developed based on the color on the original SCC. Sensitivity and specificity for predicting BA stools were compared between the SCC and the software. Results: Of 33 infants eligible for data collection, 19 were diagnosed with BA. Saturation and blue were two potential digital color parameters used to differentiate BA stools. The receiver operating characteristic curve was used to determine the optimum cutoff point of both values, and when saturation ≤56 or blue ≥61 was set as a threshold for detecting BA stool, high accuracy was achieved at 81.8% and 78.8%, respectively. Conclusion: Digital image processing is a promising technology. With appropriate cutoff values of saturation in hue, saturation, value and blue in red, green, blue color models, BA stools can be identified, and equivocal-colored stools of non-BA patients can be differentiated with acceptable accuracy in infants presenting with jaundice.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.337-342
• /
• 1989

The control of a pH value in radwaste treatment process is difficult due to the nonlinearity of the titration curve and its strong sensivity to disturbances. This paper describes an adaptive control strategy which is model-based and allows for direct use of available measurements. This algorithm forces the nonlinear process to follow a desired linear system trajectory, and were applied to the control of a simulated pilot-scale pH process. The simulation study showed that it has the potential advantage over the transformation methods that control effort saturation can be accomodated readily.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.315-318
• /
• 2002

In this paper, we have studied about the determination methode of the operating frequency, and the design technique for the self-exited electronic ballast. Because we use the saturation characteristics of the ferrite core, the variation of the B/H curve characteristics for the selected core in the most important factor for the stabilization. Although it is impossible to fix the operation frequency, the self-exited electronic ballast is widely used because of its cost and the simplicity of its structure.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권3호
• /
• pp.258-261
• /
• 2005

The Preisach model needs a distribution function or Everett function to simulate the hysteresis phenomena. To obtain these functions, many experimental data obtained from the first order transition curves are usually required. In this paper, a simple procedure to determine the Preisach density function using the Gaussian distribution function and genetic algorithm is proposed. The Preisach density function for the interaction field axis is known to have Gaussian distribution. To determine the density and distribution, genetic algorithm is adopted to decide the Gaussian parameters. With this method, just basic data like the initial magnetization curve or saturation curves are enough to get the agreeable density function. The results are compared with experimental data and we got good agreements comparing the simulation results with the experiment ones.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.377-384
• /
• 2000

The characteristics and prediction model of the shear strength for unsaturated residual soils was studied. In order to investigate the influence of the initial water content on the shear strength, unsaturated triaxial tests were carried out varying the initial water content, and the applicability of existing prediction models for the unsaturated shear strength was testified. It was shown that the soil - water characteristic curve and the shear strength of the unsaturated soil varied with the change of the initial water content. A sample compacted in the lower initial water content needs a higher suction to get the same degree of saturation while the shear strength of a sample with the lower initial water content displays a lower value. In order to apply the existing prediction models of the unsaturated shear strength to granite residual soils, a correction coefficient, α, on the internal friction angle, ø'was added.

• 한국안광학회지
• /
• 제5권2호
• /
• pp.151-155
• /
• 2000

칼라 렌즈 제작시 착색 시간에 따른 분광반사율을 측정하여 렌즈표면의 굴절률을 계산하였다. 착색 시간이 길수록 반사율과 굴절률은 커진다. 렌즈 표면에 착색물질이 포화상태가 될 때까지 굴절률은 시간에 따라 증가하였다. 시간에 따른 blue color 렌즈의 굴절률 변화 곡선은 Boltzmann 성장곡선을 따르며, 이때 $n_{min}$은 1.482. $n_{max}$는 1.497. $t_c=11.53$ 그리고 $d_0$ 등의 2.287 등의 parameter 값을 얻었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.96-101
• /
• 2004

Cast austenitic stainless steel is used for several components, such as primary coolant piping, elbow, pump casing and valve bodies in light water reactors. These components are subject to thermal embrittlement at the reactor operating temperature. The objective of this study is to summarize the method of estimating ferrite content, Charpy impact energy and J-R curve and to evaluate the thermal embrittlement of the cast austenitic stainless steel piping used in the domestic nuclear power plants. The result of evaluation, two domestic nuclear power plants used CF-8M and CF-8A material has adequate fracture toughness after saturation.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권6호
• /
• pp.787-794
• /
• 1995

To improvement the magnetic and frequency properties of YIG(Yttrium-Iron Garnet) in microwave region, it is investigated that the effect of $Al^{3+}$ ions on magnetic and frequency characteristics of YIG, using samples of basic YIG composition( $Y_{3}$F $e_{5}$ $O_{l2}$) added with A1$_{2}$ $O_{3}$ from 0 to 2.5 [mol%]. The measurment is conducted mainly for the structural properties and magnetical properties. The structural properties is measured using SEM(Scanning Electro Microscope), EDX(Energy-dispersive X-ray spectrometer) and XRD(X-ray diffraction equipment). The magnetical properties is measured with B-H curve tracer and impedance analyzer. As a result, it is confin-ned that the effect of eddy current loss is minimized while maintaining high saturation flux density of YIG, when YIG is added with 0.5 [mol%] of A1$_{2}$ $O_{3}$.>.>.

• 한국식품영양과학회지
• /
• 제19권3호
• /
• pp.215-218
• /
• 1990

포화성장모델을 이용하여 반응시간에 따른 생성물의 양을 예측하였다. 수용성 기질-수용성 효소간의 반응뿐만 아니라 비수용성 기질-수용성 효소간의 반응 결과에도 이 모델은 뛰어난 예측성을 나타내었다. 그외에도 측정치의 정확도도 이 모델로 대략 평가할 수 있었다. 사용자가 편리하도록 컴퓨터 프로그램을 BASIC 언어를 사용하여 제시하였고 이 프로그램을 이용하여 Pmax와 K 상수 값을 결정하고 상대오차의 평균값도 계산하였다.

• Journal of Magnetics
• /
• 제18권1호
• /
• pp.57-64
• /
• 2013

Flux linkage of phase windings is a key parameter in determining the behavior of a switched reluctance motor (SRM) [1-8]. Therefore, the accurate prediction of flux linkage at aligned and unaligned rotor positions makes a significant contribution to the design of an SRM and its analytical approach is not straightforward due to nonlinear saturation in flux. Although several different approaches using a finite element analysis (FEA) or a curve-fitting tool have been employed to compute phase flux linkage [2-5], they are not suitable for a simple design procedure because the FEA necessitates a large amount of time in both modeling and solving with complexity for every motor design, and the curve-fitting requires the data of flux linkage from either an experimental test or an FEA simulation. In this paper, phase flux linkage at aligned and unaligned rotor positions is estimated by means of a reluctance network, and the proposed approach is analytically verified in terms of accuracy compared to FEA.