• 제목/요약/키워드: Saturation, Compensation

검색결과 130건 처리시간 0.242초

한국산 긴잎돌김 (Porphyra pseudolinearis Ueda)의 엽상체와 배양 사상체의 광합성 비교 (Comparative Photosynthetic Physiology of Fronds and Cultivated Filaments of Porphyra pseudolinearis Ueda)

  • 김형근;주수동;전방욱
    • 한국양식학회지
    • /
    • 제7권1호
    • /
    • pp.1-7
    • /
    • 1994
  • 긴잎돌김 (Porphyra pscudolineris Ueda)의 엽상체와 배양 사상체에 미치는 온도와 광도의 영향을 구명하였다. 엽상체와 사상체의 총 광합성의 적정 온도는 각각 $25\~30^{\circ}C$, $20^{\circ}C$로 나타났다. 엽상체와 사상체에서 광도에 따른 광합성율은 공히 10,000 lux 이상에서 광합성율이 일정한 값에 도달하는 광포화 곡선을 나타내었다. 엽상체의 광 보상점은 2,100 lux, 사상체의 광 보강점은 900 lux였으며, 사상체의 광합성능은 엽상체의 5-10배에 해당하였다. 이로써 사상체는 낮은 광도하에서도 광합성을 수행할 수 있음을 알 수 있다.

  • PDF

CPT 색제시를 위한 색모델링 방법 연구 (A Study on the Color Modelling Method for Color Picture Tube Color Display)

  • 이응주
    • 한국멀티미디어학회논문지
    • /
    • 제3권6호
    • /
    • pp.586-591
    • /
    • 2000
  • 알반적으로 CPT에 재현되는 칼라영상은 수상기의 특성이나 외부광원에 의하여 영향을 받으며 CPT에 재현되는 부정확한 칼라의 조정은 주어진 영상의 색 왜곡을 발생시킨다. 본 논문에서는 일상적인 광원 환경아래 시청자들의 측면에서 CPT에 재현되는 색의 모델링을 위한 색 조정 방법을 기술하였다. 이를 위하여 본 논문에서는 광원의 세기에 따른 감마 보정 상태에서의 휘도 보상 방법, 광원의 종류에 따른 색상 및 색농도 보상 방법 및 기준색 설정을 위한 특정색 조정 방법을 제안하였다. 제안한 방법에 근거하여 광원의 반사성분의 영향과 CPT의 감마변환 및 최적의 색 설정을 위한 기준 장면 조정시 발생될 수 있는 색 오차를 감소시키는 색 보상 시스템 구현 방법을 제안하였다.

  • PDF

보상 알고리즘을 적용한 변압기 보호용 전류차동 계전방식 (Current Differential Relaying Algorithm for Power Transformer Protection Operating in Conjunction with a CT Compensating Algorithm)

  • 강용철;박종민;이미선;장성일;김용균;소순홍
    • 전기학회논문지
    • /
    • 제56권11호
    • /
    • pp.1873-1878
    • /
    • 2007
  • Current differential relays may maloperate during magnetic inrush and over-excitation because a significant differential current is produced. To prevent maloperation, the relays adopt some harmonic components included in the differential current. The harmonic restraints may increase the security of a relay but cause the operating time delay of a relay when an internal fault occurs. Moreover, the operating time delay is more increased if a current transformer (CT) is saturated. This paper describes a current differential relaying algorithm for power transformer protection with a compensating algorithm for the secondary current of a CT. The comparative study was conducted with and without the compensating algorithm. The performance of the proposed algorithm was investigated when the measurement CT (C400) and the protection CT (C400) are used. The proposed algorithm can compensate the distorted current of a CT and thus reduce the operating time delay of the relay significantly for an internal fault with CT saturation.

Braking Torque Closed-Loop Control of Switched Reluctance Machines for Electric Vehicles

  • Cheng, He;Chen, Hao;Yang, Zhou;Huang, Weilong
    • Journal of Power Electronics
    • /
    • 제15권2호
    • /
    • pp.469-478
    • /
    • 2015
  • In order to promote the application of switched reluctance machines (SRM) in electric vehicles (EVs), the braking torque closed-loop control of a SRM is proposed. A hysteresis current regulator with the soft chopping mode is employed to reduce the switching frequency and switching loss. A torque estimator is designed to estimate the braking torque online and to achieve braking torque feedback. A feed-forward plus saturation compensation torque regulator is designed to decrease the dynamic response time and to improve the steady-state accuracy of the braking torque. The turn-on and turn-off angles are optimized by a genetic algorithm (GA) to reduce the braking torque ripple and to improve the braking energy feedback efficiency. Finally, a simulation model and an experimental platform are built. The simulation and experimental results demonstrate the correctness of the proposed control strategy.

A Robust Dynamic Decoupling Control Scheme for PMSM Current Loops Based on Improved Sliding Mode Observer

  • Shen, Hanlin;Luo, Xin;Liang, Guilin;Shen, Anwen
    • Journal of Power Electronics
    • /
    • 제18권6호
    • /
    • pp.1708-1719
    • /
    • 2018
  • A complete current loop decoupling control strategy based on a sliding mode observer (SMO) is proposed to eliminate the influence of current dynamic coupling and back electromotive force (EMF) in the vector control of permanent magnet synchronous motors. With this strategy, current dynamic decoupling and back EMF compensation can be simultaneously achieved. Unlike conventional methods, the proposed strategy can avoid the disturbances caused by the parametric variations of motor systems and maintain the advantages of proportional integral (PI) controllers, which are robust and easy to operate. An improved SMO, which uses a special PI regulator other than a linear saturation function as the equivalent control law in the boundary layer of a sliding surface, is proposed to eliminate the estimated errors caused by the quasi-sliding mode and obtain a satisfactory decoupling performance. The stability and parameter robustness of the proposed strategy are also analyzed. Physical experimental results are presented to verify the validity of the method.

오대산과 울릉도 산마늘의 광합성 특성 (Photosynthetical Responses in the leaves of Allium ochotense and Allium microdictyon)

  • 한상섭;김하선;이경철
    • Journal of Forest and Environmental Science
    • /
    • 제26권3호
    • /
    • pp.203-208
    • /
    • 2010
  • This study was conducted to investigate the net photosynthetic rate, stomatal transpiration, stomatal conductance, water use efficience, and intercellular $CO_2$ concentration in Allium ochotense leaves and Allium microdictyon leaves. The light compensation point was 4.2 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ in Allium ochotense leaves and 5.2 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ in Allium microdictyon leaves. The lght saturation point was approximately 800 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ in between Allium ochotense leaves and Allium microdictyon leaves. The phtosynthetic rate of Allium ochotense leaves was higer than that of Allium microdictyon leaves. On the other hand, at more than $30^{\circ}C$, it appeared that the values of net photosynthetic rates of Allium microdictyon leaves were higher than that of Allium ochotense leaves. These results suggest that growth of those Allium ochotense plants are appropriate for relatively cool temperature site compared to Allium microdictyon plants.

자생지에 따른 꼬리진달래의 광합성 특성 및 엽록소 함량 (Photosynthetic Characteristics and Chlorophyll Content of Rhododendron micranthum by the Natural Habitat)

  • 김남영;이경철;한상섭;이희봉;박완근
    • 생물환경조절학회지
    • /
    • 제21권2호
    • /
    • pp.147-152
    • /
    • 2012
  • 자생지별 꼬리진달래의 생리반응을 측정한 결과 광보상점은 석포리 11.8 ${\mu}mol\;m^{-2}\;s^{-1}$, 연하리 11.5 ${\mu}mol\;m^{-2}\;s^{-1}$, 월악산 10.4 ${\mu}mol\;m^{-2}\;s^{-1}$로 나타났으며, 광포화점은 500~600 ${\mu}mol\;m^{-2}\;s^{-1}$ 범위로 나타나 음수의 생리적 특성을 갖고 있었다. 광포화시의 광합성 능력은 석포리 5.5 ${\mu}mol\;m^{-2}\;s^{-1}$, 연하리 5.4 ${\mu}mol\;m^{-2}\;s^{-1}$, 월악산 5.6 ${\mu}mol\;m^{-2}\;s^{-1}$로 나타나 광보상점과 광포화점, 광합성 능력은 자생지별로 유의적인 차이가 나타나지 않았다. 온도 변화에 따른 자생지별 꼬리진달래의 순광합성 속도는 3지역 모두 20~$30^{\circ}C$ 온도역에서 높은 광합성 속도를 유지하는 것으로 나타났으며, 그 중 $25^{\circ}C$에서 가장 활발한 광합성을 하는 것으로 나타났다. 연하리의 수분이용효율이 석포리와 월악산에 비해더 높은 것은 포화광도에서 낮은 기공증산속도로 인한 결과였으며, 꼬리진달래의 자생지별 엽록소 a, b 및 총 엽록소 함량은 유의적차이가 없는 것으로 나타났다. 위의 결과를 통해 꼬리진달래는 음수의 특성을 가지며, 생육에 적합한 온도는 20~$30^{\circ}C$인 것을 알 수 있었다.

생육환경에 따른 한국특산식물 벌개미취의 광합성 특성 (Photosynthetic Characteristics of Korean Endemic Plant, Aster koraiensis Nakai According to Growth and Development Conditions)

  • 남효훈;손창기;이중환;권중배
    • 한국자원식물학회지
    • /
    • 제29권4호
    • /
    • pp.393-399
    • /
    • 2016
  • 한국특산식물 벌개미취의 재배환경에 따른 생리적 반응과 최적 재배조건의 설정을 통해 생산성을 향상하기 위하여 연구를 수행하여 얻어진 결과를 요약하면 다음과 같다. 생육시기별 광합성률은 정식 후부터 급격히 증가하였다가 7월 이후 감소하였으며 정식 2년차에서는 생육 후기로 갈수록 저하되는 경향이었고 광보상점은 생육 초기에 높았다가 후기에 감소하였다. 세포내 CO2 농도가 증가할수록 광합성률은 증가하였으나 일정 수준 이상에서는 정체 혹은 감소하는 경향이었고 생육시기별 CO2 보상점은 5월에 가장 낮았다. 차광처리에서 엽록소 함량은 무처리에 비해 높았으며 잎 형태의 유의한 변화가 관찰되었다. 무차광 또는 50% 차광수준에서 광합성률이 높았다.  토양수분 조건에 따라서 잎의 형태적 변화는 거의 없었으나 엽충실도가 변화하였고 −25 kPa 이상의 토양수분조건에서는 광합성률, 순양자 수율은 증가하였으며 이에 따라 암호흡속도도 증가하였고 수분 이용효율은 감소하였다.

광학 센서를 이용한 비관혈적 혈압 측정의 오차 보정 (Compensation of Error in Noninvasive Blood Pressure Measurement System Using Optical Sensor)

  • 고재일;정인철;이동희;박신우;황성오;박소미;김기연;주현실;윤형로
    • 대한의용생체공학회:의공학회지
    • /
    • 제28권2호
    • /
    • pp.178-186
    • /
    • 2007
  • This study is attempted to correct an error of electronic blood pressure meter with an optical sensor. In general, for a hospitalized patient, ECG, blood pressure, oxygen saturation, and respiration are basically measured to monitor the patient's condition. Opening of a blood vessel after it is occluded by pressurizing the cuff influences the blood flow of peripheral blood vessels as well as oscillation changes in the cuff. Blood vessels are occluded and peripheral blood flow disappears at cuff pressure above the examinee's blood pressure, while blood vessels are opened and peripheral blood flow appears again at cuff pressure under the examinee's blood pressure. Then Disappear-Appear Point Length(DAPL) of peripheral blood flow can be judged with the signal of peripheral blood flow, thus is available as a factor of error correction for electronic blood pressure meter. Also, systolic or diastolic blood pressure can be corrected with Appear-Point-Pressure(APP) of cuff pressure at a point where blood flow occurs and Appear-Maximum Pressure(AMP) of cuff pressure at the maximum amplitude point of peripheral blood flow after peripheral blood flow appears again. For verification, 27 examinees were selected, and their blood value was obtained through experimental procedure of 4 stages including induction of blood pressure change. The examinees were divided into two groups of experimental group and control group, regression analysis was conducted for experimental group, and correction of a blood pressure error was verified with optical signal by applying the regression equation calculated in experimental group to control group. As an experimental result, mean of the whole measurement errors was 5mmHg or more, which did not meet the standard fur blood pressure meter. As a result of correcting blood pressure measurements with data of DAPL, APP, and AMP as drawn out of PPG signal, systolic blood pressure, mean blood pressure, and diastolic blood pressure were $-0.6{\pm}4.4mmHg,\;-1.0{\pm}3.9mmHg$ and $-1.3{\pm}5.4mmHg$, respectively, indicating that mean of the whole measurement errors was greatly improved, and standard deviation was decreased.

Anaglyph 영상의 망막경합 최소화를 위한 밝기 보상 (Lightness Compensation for Anaglyph Images to Reduce Retinal Rivalry)

  • 장우헌;이태형;김대철;이철희;하영호
    • 대한전자공학회논문지SP
    • /
    • 제49권1호
    • /
    • pp.88-96
    • /
    • 2012
  • 3차원 영상(3D image)이란 영상 매체를 통해서 현실세계와 동일하게 인식하는 방법으로 인간의 시각 특성을 이용하여 실제로 자연에서 보고 느끼는 현실감, 깊이감을 그대로 표현해 내는 기술을 이야기 한다. 이러한 3D 영상을 디스플레이와 프린트매체 모두에 사용되기 위해 적용되는 영상처리 기법이 anaglyph를 이용한 3D 영상 처리이다. Anaglyph는 주로 적-청 안경을 사용해서 한쪽에는 적색영상을 인지하고, 한쪽에는 청색영상을 인지하도록 하며, 이 때 적색과 청색 영상의 깊이감을 조절하여 영상이 3D로 인식 되도록 하는 기술이다. Anaglyph기법은 간단하게 영상을 생성할 수 있고, 또한 필터의 구현이 쉬운 반면, 좌 우 영상의 밝기차이로 발생하는 망막 경합 현상을 야기하여 사람이 3D를 인지하는 동안 눈에 피로감을 가중 시킨다. 따라서 본 연구에서는 두 영상의 밝기차이를 줄여 망막 경합을 최소화 하는 영상처리 방법을 제안한다. 또한 밝기 차를 줄이면서 나타나는 색 왜곡 현상과 채도 저하 현상을 보상하여 결과 영상의 화질을 향상시킨다. 밝기를 보상하는 방법은 원본 영상의 밝기와 좌 우 영상의 밝기의 평균을 취하여 밝기 비율을 유지하면서 두 영상의 밝기 차이가 줄여진다. 그 결과, 밝기 차에서 나타나는 망막경합을 최소화 하면서, 또한 필터의 사용으로 인해 나타나는 밝기 저하 현상을 보상한다. 밝기의 향상으로 인해나타나는 채도 저하 현상은 디스플레이의 색역의 가장자리(boundary)의 변화에 비례하여 채도를 향상시킴으로써 밝기에 비례한 채도 향상이 이루어져 보다 원본에 가까운 색을 관찰할 수 있다. 또한 밝기 보상과정에서 좌 우 영상의 색이 섞이는 현상에 대해 필요한 요소 외에는 절단(Clipping) 방법을 적용하여, 각 영상에 필요한 요소만을 취함으로써 더욱 원본에 가까운 영상을 재현한다.