• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.39-44
• /
• 2007

In this paper, satellite searching and tracking method for the satellite antenna in naval vessels system are proposed. For fast searching satellite, Wide Range Search(WRS) algorithm is proposed where the signal strength of side-lobe is utilized as well as that of main-lobe. Satellite tracking algorithm to stabilize satellite antenna is based on conical-scanning which is accomplished by the use of the sub-reflector located in front of the focus of the reflector. The sub-reflector rotates about a slightly tilted axis by means of a motor and shapes the antenna beam to utilize stabilization. To show the validity of the proposed method, an experimental example is represented.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.552-554
• /
• 2003

Searching and enhancement of shadow area in the satellite imagery is one of growing interest because of new possible needs of application in this field. This paper proposes an algorithm to search and enhance the shadow areas caused by buildings such as apartments which are very common in Korean satellite imagery. The proposed searching algorithm makes use of characteristics of histogram of images in the spatial domain and also uses the fast Fourier transform and correlation in Frequency domain. Further, the enhancement algorithm is only applied to the shadow areas searched and preserves the areas which are naturally dark.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.3
• /
• pp.391-400
• /
• 2016

In satellite operations, stable maneuvering of a satellite's onboard antenna to prevent undesirable vibrations to the satellite body is required for high-quality high-resolution images. For this reason, the onboard antenna's angular rate is typically minimized while still satisfying the system requirement that limits the speed of the onboard antenna. In this study, a simple yet effective method, called the ground station searching method, is proposed to reduce the angular rate of a satellite's onboard antenna. The performance of the proposed method is tested using real flight data from the KOMPSAT-3 satellite. Approximately 83% of arbitrarily selected real flight scenarios from 66 test cases show reductions in the onboard antenna's azimuth angular rates. Additionally, reliable solutions were consistently obtained within a reasonably acceptable computation time while generating an onboard antenna tracking profile. The obtained results indicate that the proposed method can be used in real satellite operations and can reduce the operational loads on a ground operator. Although the current work only considers the KOMPSAT-3 satellite as a test case, the proposed method can be easily modified and applied to other satellites that have similar operational characteristics.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1115-1121
• /
• 2001

This paper presents the development of a tracking algorithm for shipborad satellite antenna systems which can enhance the tracking performance. In order to overcome some drawbacks of the conventional step tracking algorithm a new tracking algorithm is proposed. The proposed algorithm searches for the best tracking angles using gradient-based formulae and signal intensities measured according to a search pattern. The effectiveness of the proposed algorithm is demonstrated through simulation using real data.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.141-152
• /
• 1993

This study aims to generate digital elevation model from digital satellite imagery. Digital elevation model is being increasingly used for geo-spatial information system database development and for digital map production. Image matching technique was applied to acquire conjugate image coordinates and the algorithm for digital elevation model generation is presented in this study The exterior orientation parameters of the satellite imagery is determined by bundle adjustment and standard correlation was applied for image matching conjugate of image points. The window as well as the searching area have to be defined in image matching. Different sizes of searching area were tested to study the appropriate size of the searching area. Various coordinate transformation methods were applied to improve the computation speed as well as the geometric accuracy. The results were then statistically analysed after which the searching area is determined with the safety factor. To evaluate the accuracy of digital elevation model, 3-D coordinates were extracted from 1/5000 scale topographic map and this was compared to the digital elevation model generated from satellite imagery. The algorithm for generation of digital elevation model generated from satellite imagery is presented in this study which will prove effective in the database development of geo-spatial information system and in digital elevation modelling of large areas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1240-1255
• /
• 1996

This paper suggests power optimization technique in multi-level SCPC system as a method for efficient utilization of limited satellite power. The power optimization is realized by optimal assignment of satellite input carrier powers considering interference and noise generated in up-link and down-link. The Fletcher-Powell algorithm searching minimum(or maximum) point using gradient information is used to detemine the optimal input carrier powers. To apply Flectcher-Powell algorithm mathematical descriptions and their partial derivatives to interference and nose are presented. Because a target, which should be optimized, is satellite input carrier power, amplitude of each carrier group will be assumed to be an independent variable. The performance criterion for optimal power assignmentis classified into 4 categories with respect to CNR of destination receiver earth station to meet the requirement for various satellite link environment. Simulation results for two-level, four-level and six-level SCPC system are presented.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.1
• /
• pp.91-107
• /
• 2003

A 2-dimensional search process in the time and frequency domain is required to acquire the GPS signal, when the code phase and the carrier Doppler for the specified GPS satellite signal are unknown. This paper proposes a new scheme, called Squared-D Searching Method, which can reduce the number of carrier frequency candidates, and a new scheme, named extended Multiple Correlator(XMC), which can reduce the number of code phase candidates. The Squared-D Searching Method can take the twice of Doppler frequency, therefore it can find carrier frequency candidates. The XMC is different from the general multiple correlator in that a combined form of the locally generated codes is used for despreading. Also, this paper tries to analyze a signal detection probability of a GPS receiver under more realistic environments. The result shows that lower detection probability can be obtained when the phase differences among the codes are larger in the correlation arms of a multiple correlator. This phenomenon is not easy to explain with the previous results. And besides, the result shows that proposed acquisition schemes give better performance than a conventional acquisition scheme.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.669-672
• /
• 2003

This paper proposes a tracking algorithm for receiving satellite signal. Tracking algorithm uses the angular velocity of vehicle and the slope of received satellite signal for searching the maximum level of signal. The tracking algorithm is composed of two parts. One is the routine to maintain the acceptable signal in spite of the variation of angular velocity. The other is the fine tuning routine to search the maximum signal level by giving the weight factors to the slope of signal. Experimental results show that the proposed algorithm is efficient and stable.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.285-288
• /
• 2010

In this paper, we present a very useful method for updating digital satellite radio broadcast channel information. When a devices equipped with function to receive Digital Satellite Radio such as Home Theater, MP3 player, mobile phones, car audio system and various other types of Digital Devices, receives new Digital satellite radio (will be mentioned as XM radio onwards) broadcast channel information, only the current received XM radio broadcast channel and N number of pre/post nearby broadcast channels are scanned randomly in zigzag manner. Then the previous XM radio broadcast channel information updated with the newly received XM radio broadcast channel information. Since this method can prevent batch update for all XM radio channel, including some channels which less likely did not select by user, update process for real time frequently changed XM radio broadcast channel information can be performed efficiently with minimal or without delay.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.803-809
• /
• 2011

In this paper, we present a very useful method for updating digital satellite radio broadcast channel information. When a devices equipped with function to receive Digital Satellite Radio such as Home Theater, MP3 player, mobile phones, car audio system and various other types of Digital Devices, receives new Digital satellite radio (will be mentioned as XM radio onwards) broadcast channel information, only the current received XM radio broadcast channel and N number of pre/post nearby broadcast channels are scanned randomly in zigzag manner. Then the previous XM radio broadcast channel information updated with the newly received XM radio broadcast channel information. Since this method can prevent batch update for all XM radio channel, including some channels which less likely did not select by user, update process for real time frequently changed XM radio broadcast channel information can be performed efficiently with minimal or without delay.