• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.43-47
• /
• 1999

In this paper, we describe the configuration of the KITSAT-3 image data receiving, archiving, processing and distribution system in operation. Following the low-cost and software-based design concept, the whole system is composed of three PCs : two for data receiving, archiving and processing which provide a full dual-redundant configuration and one for image catalog browsing which can be accessed by public users. Except that receiving and archiving PCs have serial data ingest boards plugged in, they are configured by general peripherals. This basic and simple hardware configuration made it possible to show that a very low cost system can support a full ground operation for the utilization of high-resolution satellite image data.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.522-525
• /
• 2007

Frame Synchronization is applied to not only digital data transmission for data synchronization between transmitter and receiver but also data communication with satellite. When satellite image data with high resolution and mass storage is transmitted, hardware frame synchronizer for real-time processing or software frame synchronizer for post-processing is used. In case of hardware, processing with high speed is available but data loss may happen for Search of Frame Synchronization. In case of software, data loss does not happen but speed is relatively slow. In this paper, Pending Buffer concept was proposed to cope with data loss according to processing status of Frame Synchronization. Algorithm to process Frame synchronization with high speed using bit threshold search algorithm with pattern search technique and SIMD is also proposed.

• Korean Journal of Remote Sensing
• /
• v.19 no.3
• /
• pp.191-200
• /
• 2003

Remote sensing division of satellite technology research center (SaTReC) , Korea advanced institute of science and technology (KAIST) has developed a ground receiving and processing system for high resolution satellite images. The developed system will be adapted and operated to receive, process and distributes images acquired from of the second Korean Multi-purpose Satellite (KOMPSAT-2), which will be launched in 2004. This project had initiated to develop and Koreanize the state-of-the-art technologies for the ground receiving system for high resolution remote sensing images, which range from direct ingestion of image data to the distribution of products through precise image correction. During four years development from Dec. 1998 until Aug. 2002, the system had been verified in various ways including real operation of custom-made systems such as a prototype system for SPOT and a commercialized system for KOMPSAT-1. Currently the system is under customization for installation at KOMPSAT-2 ground station. In this paper, we present accomplished work and future work.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.109-115
• /
• 2014

This paper suggest meteorological satellite processing software's structure that reduces time and efforts of modification/upgrade. This structure's key feature is "algorithm component" that works within framework and eventually to a complete Meteorological satellite processing system. Most of existing Meteorological satellite system is designed around specific function and data sets which limits range of modification and upgrade. In addition, re-use of current algorithms become difficult although re-use of similar algorithm is the case in many occasions. This inefficiency can be resolved by designing a new framework as a result of detail analysis of collected requirements. A new framework and system architecture has been designed. In addition, operational flow of Satellite image processing framework has been described.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.804-809
• /
• 2002

Remote sensing division of satellite technology research center (SaTReC), Korea advanced institute of science and technology (KAIST) has developed a ground receiving and processing system for high resolution satellite images. Developed system will be adapted and operated to receive, process and distributes images acquired from of the second Korean Multi-purpose Satellite (KOMPSAT-2), which will be launched in 2004. This project had initiated to develop and Koreanize the state-of-the-art technologies related to the ground receiving system fur high resolution remote sensing images, which range from direct ingestion of image data to the distribution of products through precise image correction. During four years development, the system has been verified in various ways including real operation of custom-made systems such as a prototype system for SPOT and a commercialised system for KOMPSAT-1. Currently the system is under customisation for installation at KOMPSAT-2 ground station. In this paper, we present accomplished work and future work.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.31-33
• /
• 2003

Recently, KARI developed in-house meteorological sensor processing system named MESIS for GOES GVAR 5-CH Imager for better KOMPSAT EOC mission operation. MESIS consists of antenna system, receiver, serial telemetry card, processing and mapping software, and 2 NT PC systems. This paper shows system requirement, system design, characteristic and test results of processing system. System operation concept and sample image are also provided. Implemented system was proven to be fully operational through lots of operations covering from RF signal reception to web publishing.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1418-1420
• /
• 2003

This presentation summarizes the development of the integration information search system for a Test-bed area located in Daejeon. It will be used for the validation of software components developed for the high resolution satellite image processing. The system development utilizes the Java programming language and implements the web browse capabilities to search, manage, and augment the satellite image data, the Ground Control Point(GCP) data, the spectral information on land cover types, the atmospheric data, and the topographical map.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.537-539
• /
• 2007

Telemetry processing system requires minimum bit transition level in data streams to maintain a bit synchronization while receiving telemetry signal. PN code has a capability of providing the bit transition and is widely used in the packet communication of CCSDS. CCSDS PN code that generator polynomial is $h(x)=x^{8}+x^{7}+x^{5}+x^{3}+1$, and the random bit sequence that is generated from this polynomial is repeated with the cycle of 255 bits. As the resolution of satellite image increases, the size and transmission rate of data increases. To process of huge and bulky size of satellite image, the speed of CCSDS PN Processing is very important. This paper introduces the way of improving the CCSDS PN Processing speed through processing 128 bits at one time using the feature of cyclic structure that repeats after first 255 bytes by grouping the random bit sequence with 1 byte and Intel Streaming SIMD Extensions 2. And this paper includes the comparison data of processing speed between SSE2-applied implementation and not-applied implementation, in addition, the measured value of speed improvement.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.331-336
• /
• 1999

The optical sensors of Electro-Optical Camera (EOC) and Ocean Scanning Multi-spectral Imager (OSMI) aboard the Korea Multi-Purpose SATellite (KOMPSAT) will be placed in a sun synchronous orbit in 1999. The EOC and OSMI sensors are expected to produce the land mapping imagery of Korean territory and the ocean color imagery of world oceans, respectively. Utilization of the EOC and OSMI data would encompass the various fields of science and technology such as land mapping, land use and development, flood monitoring, biological oceanography, fishery, and environmental monitoring. Readiness of data support for user community is thus essential to the success of the KOMPSAT program. As part of testing such readiness prior to the KOMPSAT launch, we have performed the preliminary acceptance test for the KOMPSAT data processing system using the simulated EOC and OSMI data sets. The purpose of this paper is to demonstrate the readiness of the KOMPSAT data processing system, and to help data users understand how the KOMPSAT EOC and OSMI data are processed and archived. Test results demonstrate that all requirements described in the data processing specification have been met, and that the image integrity is maintained for all products. It is however noted that since the product accuracy is limited by the simulated sensor data, any quantitative assessment of image products can not be made until actual KOMPSAT images will be acquired.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.13-20
• /
• 2012

Despite of growing concern for developing meteorological satellites, poor investment has been realized to acquire effective and efficient satellite image processing technologies. In this study, not only qualitative exploration on mapping each elementary technology into related industries but quantitative inter-industry analysis induced from Total Cost of Ownership (TCO) of the Korean satellite image processing system were performed. Furthermore, economic assessment has been made by estimating internal rate of return(IRR) for the benefits returned versus TCO of the system. The results showed that agriculture and fisheries industry, tourist and leisure industry, and transportation industry were highly related with the acquisition of the system, and that 9.1 billion won of production-induced effects, 3.3 billion won of value-added-induced effects, and 54 individuals of employment-induced effects were anticipated except for those of directly relevant industries. Even in the pessimistic scenario, 7% of IRR exceeding 5.5% assumed as current public rate was postulated, consequently, the investment was fairly justified.