• 한국임상수의학회지
• /
• 제31권3호
• /
• pp.250-252
• /
• 2014

산통 증상을 보인 12세된 웜블러드(거세, 540 kg) 말로부터 임상검사 및 실험실 검사결과 모래 등 이물에 의한 장폐색으로 진단하여 개복술과 장절개술을 실시한 결과 장결석을 확인하여 적출하였다. 적출한 장결석은 약 2.9 kg, 녹갈색, 럭비공 크기($22cm{\times}10cm$)였다. 주사전자현미경(FE-SEM, Hitachi S-4300모델)을 이용하여 원소성분(EDX)을 분석한 결과 400배율에서 C(30.08%), O(39.85%), Mg(3.89%), P(11.15%), Ca(11.16%)가 높게 나타났다. 국내 말에서 크기가 가장 큰 장결석 적출 및 치료가 성공적으로 진행된 최초의 예로서 그 의의가 있다고 볼 수 있다.

• Journal of Preventive Medicine and Public Health
• /
• 제23권3호
• /
• pp.275-284
• /
• 1990

To obtain the useful information for the status of working environment and health management of workers in manufacturing industries, comparision of results on the status of working environmental and health management of workers for 32 manufacturing industries in Chunan area from 1988 to 1989 was carried out. The results were as follows : 1. The rate of over-PEL (Permissible Exposure Limit) to for hazardous factors decreased significantly 23.5% in 1988, 18.3% in 1989 (p<0.05) and, the highest rate of over-PEL was the stone and sand handling industry, the highest rate of over-PEL was the dusty workplace as 38.5% in 1988, 35.2% in 1989. 2. The rate of workers exposed to hazardous factors in 1988 and in 1989 was 22.4% respectively, the rate of workers checked up special health examination was 40.1% in 1988, 75.3% in 1989. In stone and sand handling and medicochemical industries, none of workers exposed to hazardous factors was subjected to special health examination in 1988, but 75% of workers exposed to hazardous factors had checked up in 1989. 3. The 6 industries appointed as part-time factory physician among 17 industries which were supposed to have factory physician according to the Safety and Healthy Act of Korea, 6 out of 24 industries only appointed industrial hygienist, furthermore 4 out of 6 hygienists had another duty in addition to occupational hygiene itself.

• 대한토목학회논문집
• /
• 제32권4C호
• /
• pp.139-147
• /
• 2012

본 연구에서는 모래의 수급 문제와 회처리장 부족으로 전력생산 위기에 처해진 화력발전소의 문제점을 해결하며, 쇄석다짐말뚝의 폐색 현상에 대처하기 위한 방안으로 모래와 공학적 성질이 유사한 화력발전소 부산물인 저회를 조립재료다짐말뚝 재료로 활용하기 위하여 다양한 공학적 시험을 실시하였다. 특히 연약지반에 쇄석다짐말뚝의 클로깅 현상을 줄이고 말뚝 내 공극을 감소시키기 위한 연구가 수행되었다. 각 재료의 배합비별 전단강도 시험을 통해 적정혼합비를 산정하고 연약지반에 적용 시 효율적인 치환율을 공학적 시험으로 도출하였다. 다짐 시험 및 대형직접전단 시험결과, 쇄석:저회 혼합비 80:20의 전단강도가 가장 크므로 쇄석과 저회 혼합다짐말뚝의 최적 혼합비로 결정하였다. 저회의 혼합비가 20% 이상의 영역에서는 혼합재료의 입자간 맞물림 효과 감소에 의한 내부마찰각 저하가 발생하였다. 동결융해법에 의한 모형시험 방법을 개발하여 압축시험을 수행한 결과, 저회혼합다짐말뚝의 치환율이 40% 이상일 경우 그 영향이 크게 증가하지 않았다. 따라서 저회혼합다짐말뚝을 연약지반에 시공 시 경제적인 치환율은 40%로 판단된다.

• Steel and Composite Structures
• /
• 제45권2호
• /
• pp.205-218
• /
• 2022

Proper calculation of splitting tensile strength (STS) of concrete has been a crucial task, due to the wide use of concrete in the construction sector. Following many recent studies that have proposed various predictive models for this aim, this study suggests and tests the functionality of three hybrid models in predicting the STS from the characteristics of the mixture components including cement compressive strength, cement tensile strength, curing age, the maximum size of the crushed stone, stone powder content, sand fine modulus, water to binder ratio, and the ratio of sand. A multi-layer perceptron (MLP) neural network incorporates invasive weed optimization (IWO), cuttlefish optimization algorithm (CFOA), and electrostatic discharge algorithm (ESDA) which are among the newest optimization techniques. A dataset from the earlier literature is used for exploring and extrapolating the STS behavior. The results acquired from several accuracy criteria demonstrated a nice learning capability for all three hybrid models viz. IWO-MLP, CFOA-MLP, and ESDA-MLP. Also in the prediction phase, the prediction products were in a promising agreement (above 88%) with experimental results. However, a comparative look revealed the ESDA-MLP as the most accurate predictor. Considering mean absolute percentage error (MAPE) index, the error of ESDA-MLP was 9.05%, while the corresponding value for IWO-MLP and CFOA-MLP was 9.17 and 13.97%, respectively. Since the combination of MLP and ESDA can be an effective tool for optimizing the concrete mixture toward a desirable STS, the last part of this study is dedicated to extracting a predictive formula from this model.

• 생태와환경
• /
• 제47권1호
• /
• pp.13-23
• /
• 2014

본 연구는 시설하우스에서 비점오염원으로 인해 배출되는 오염된 농업배수를 인공습지에서 효과적으로 처리하기 위한 기초자료를 확보하기 위해 인공습지에서 여재종류, 조합방법 및 부하량에 따른 오염물질 정화효율을 평가하였다. 인공습지의 조합방법은 수직-수평흐름조, 수평-수직흐름조, 수평-수직-수평흐름조 및 수직-수평-수평흐름조로 구분하여 설계 및 시공하였으며, 여재는 왕사, 쇄석, 방해석 및 혼합여재로 구분하여 각 조에 충진하였다. 또한 농업배수 부하량을 150, 300, $600L\;m^{-2}day^{-1}$으로 달리하여 오염물질의 처리효율을 조사하였다. 조합방법별 수처리효율은 HF-VF-HF 조합방법이 다른 조합방법에 비해 높은 처리효율을 보였으며, 최적여재는 COD 처리효율은 왕사가 가장 높았고, T-N은 쇄석, T-P는 방해석이 가장 높았다. 하지만 모든 처리효율과 경제성 부분을 고려하였을 때 최적여재는 혼합여재가 가장 효과적일 것으로 판단된다. 농업배수의 부하량에 따른 처리효율 결과 COD는 농업배수 부하량 $600L\;m^{-2}day^{-1}$까지 안정적인 처리효율을 보였으나, T-N 및 T-P는 $150L\;m^{-2}day^{-1}{\fallingdotseq}300L\;m^{-2}day^{-1}$ > $600L\;m^{-2}day^{-1}$의 순으로 농업배수의 부하량이 증가함에 따라 약간 감소하는 경향이었다. 따라서 시설하우스 농업배수 처리를 위한 인공습지 농업배수처리장의 최적조건은 HF-VH-HF 조합형 인공습지에 왕사, 쇄석 및 방해석이 혼합된 혼합여 재로 충진하고 부하량 $300L\;m^{-2}day^{-1}$ 이하의 농업배수를 주입하는 것이 최적일 것으로 판단된다.

• 한국조경학회지
• /
• 제30권3호
• /
• pp.86-93
• /
• 2002

The objectives of this research were to investigate the effect of serpentine as a new soil conditioner for growth of turfgrass. To achieve the goal, pure sand or mixtures of sand and serpentine with various ratios were tested for soil physical properties and the growth effects of perennial ryegrass and zoysiagrass growth were compared. Major results of this research are summarized as follows; 1) Hydraulic conductivity of 10~30% serpentine mixtures were observed within the range of 1010~901mm/h which is good for USGA recommendation. Experimental results of pH and EC for various mixtures indicated that the 10% serpentine mixture was the most suitable for turfgrass growth. 2) Perennial ryegass treated with 10% serpentine mixture showed the highest visual quality(p<0.01) among all treatments. And serpentine treatment was more effective to improve visual quality of perennial ryegrass than that of zoysiagrass. The treatment of 10% serpentine had better visual qualities than that of 20% in both of zoysiagrass and perennial ryegrass. Treatment with the right amount of serpentine extends green period for one to two weeks during early winter in both zoysiagrass and perennial ryegrass. 3) In perennial ryegrass, the treatment of 10% serpentine resulted in an increase of total dry weight compare with those of zeolite or barley stone, and also dramatically promoted the dry weight by 15% compared with sand 100%(control). Total dry weight of zoysiagrass treated with 10% serpentine was 9％ higher than that of san. These results indicated that serpentine can be a good soil conditioner for both zoysiagrass and perennial ryegrass when it is blended with sand within a range of 10 to 20% by volume.

• 한국지형학회지
• /
• 제23권1호
• /
• pp.17-33
• /
• 2016

Samples from newly exposed outcrop of sedimentary layers forming Jeongdongjin coastal terrace in Gangreung area are collected and analyzed to find the sedimentary environment. The site are located at the gentle hillslope of the terrace surface area. The height of the outcrop is about 8m and the altitude of it's highest part is 68~73m MSL. The lowest part of this out crop is the partly consolidated sand layer with gravel veneer within it. It is found that this part is not in-situ weathered sand stone through the OSL method. This sand layer is overlain by the gravel layer with sand matrix. The shapes of the gravels from this part are mainly 'platy', 'elongated', and 'bladed' by the index of Sneed and Folk(1958). In addition, mean roundness is not so high. It is sceptical to regard this part as marine sediments which are continuously exposed to erosional processes. The boundary between the lowest sand layer and gravel layer showing the abrupt change in forming material without any mixture or transitional zone, so gravels are seemed to deposited after some degree of consolidation of the lowest sand layer. In addition, the hight of the boundary between layers are changed by the place, so the surface of the partly consolidated sand layer is not flat and has irregularity on topography when it buried by gravels. Main part of this out crop is the poorly sorted coarse gravel(22.4mm) with sand matrix($1.36{\phi}$) layer with at least 2m thick covering the relatively fine gravels discussed above. Over 20% of particles have 'very platy', 'very elongated' and 'very bladed' shape and only less than 5% of particles have 'compact' shape, So this particles are also very hard to be regard as marine gravels which are abraded by marine processes. It can be concluded that this gravel layer formed by fluvial processes rather than coastal processes base on the form of the clast and sedimentary structure. The gravel layer is covered by fine($3{\sim}4{\phi}$) material layers of psudo-gleization which showing inter-bedding of red and white layers. Chemical composition of matrix and other fine materials should be analyzed in further studies. It is attempted to fine the burial ages of the sediment using OSL method, but failed by the saturation. So it can be assumed that these sediments have be buried over 120ka.

• 한국의류학회지
• /
• 제37권3호
• /
• pp.348-356
• /
• 2013

Denim washing is processed with different washing techniques such as stone washing, chemical washing, sand washing, and bio washing. Cellulase bio washing can meet environmental regulations that enhance and rectify problems associated with traditional decolorization techniques; however, stone washing needs to be added to the processing because it produces a low decolorization effect. There is also the problem of additional strength reduction. To prevent these problems, a new enzyme for bio washing is required. This study examines the optimum laccase treatment conditions on denim and evaluated the characteristics of laccase-treated denims to establish a database of eco-friendly new decolorization process on denim using a new laccase enzyme. The results show that the optimum conditions of laccase on denim are a pH of 4.0, $30^{\circ}C$, 7% (o.w.f.), and 6 hours in 10 mM of buffer concentration. UV absorbance and HPLC identified isatin coexist with anthranilic acid in solution after laccase treatment on denim. Results of the surface color, the surface morphology and the tensile strength indicate that laccase treatment shows an excellent decolorization effect without fiber damage. The wet cleaning fastness and the perspiration fastness also improved.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.85-88
• /
• 2006

This study investigated influence of fine aggregate types on fundamental properties of cement mortar. Test showed that concrete using lime stone crushed fine aggregate(L) exhibited the most favorable fluidity due to grain shape and particle distribution, and next was blending aggregate miting L and G, blending aggregate mixing L and N, granite crushed fine aggregate(G), natural fine aggregate(N) in an order. Concrete using N had the highest air content and L was the smallest value because of the effective filling performance by continuos particle distribution. Compressive, tensile and flexural strength of all concrete using L had the highest value due to the smallest value of air content. It is also found that concrete using L resulted in decrease of drying shrinkage length change ratio.

• 수산해양교육연구
• /
• 제22권4호
• /
• pp.501-507
• /
• 2010

The ceramic contained paint was made to replace the lead sinker for gill-net with coated lead sinker. The ceramic contained paints were coated in various conditions on the lead sinker with 19g of weight and the optimal coating condition was studied. The adaptability of the coated lead sinker was checked through the anti durability test and fishing operation with gill-net. The case of "Main material 70 wt% + Urethane thinner 30 wt% (Main material 700 $m{\ell}$ + Thinner 300 $m{\ell}$)" showed the best in the coating characteristics depending on the combination ratio of the ceramic paint contained. The coated lead sinker dried at $100^{\circ}C$ inside oven was superior to the drying in the room temperature in its surface glossiness and anti durability and faster drying time than the one dried in normal temperature. The quadruple layers of coating on lead sinker with 4 times of dipping and drying application showed the super anti durability in the coating characteristics depending on the frequency of dipping. When press is applied to the coated lead sinker, the coated layer is not detached from the sinker. In addition, the coated lead sinker was not damaged or peeled at the fishing operation about 2 months in various depths within 50m and by the materials at the bottom (sand, stone and gravel stone) and it was in good condition.