• Horticultural Science & Technology
• /
• v.30 no.5
• /
• pp.596-602
• /
• 2012

Infestations of Aphis gossypii per leaf in greenhouse cultivation of cucumbers were investigated to develop binomial sampling plans. An empirical $P_T-m$ model, $ln(m)={\alpha}+{\beta}ln[-ln(1-P_T)]$, was used to evaluate relationship between the proportion of infested leaves with ${\leq}$ T aphids per leaf ($P_T$) and mean aphid density (m). Tally thresholds (T) were set to 1, 3, 5, 7, and 9 aphids per leaf to find appropriate T in greenhouse cultivation of cucumbers. Increasing sample size had little effect on the precision of the binomial sampling plan. However, the precision increased with tally threshold. The binomial model with T = 5 provided appropriate predictions of the mean densities of A. gossypii in the greenhouse cultivation of cucumbers. Using a binomial model with T = 5 (sample size = 200), a wide range of densities (1.2 - 222.8 aphids per leaf) could be estimated with precision levels of 0.346 - 0.380 for $P_T$ values between 0.15 and 0.96. Binomial models were validated at T = 5 and 7 using 12 independent data sets. Both binomial models were robust and adequately described aphid densities; most of the independent sampling data fell within 95% confidence intervals around the prediction model.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1860-1875
• /
• 2013

In this paper, we present a comparative performance evaluation of the sampling frequency synchronization method that eliminates the initial sampling frequency offset (SFO) to reduce the overall synchronization time in Digital Radio Mondiale (DRM) receivers. To satisfy the advanced synchronization performance requirements of DRM receivers, we introduce the conventional DRM synchronization method (Method 1) and another method (Method 2), which does not perform the initial sampling frequency synchronization in the conventional synchronization method (both methods are mentioned later in this paper). To demonstrate the effectiveness of the performance evaluation, analytical expressions for frame detection are derived and simulations are provided. Based on the simulations and numerical analysis, our result shows that Method 2, with a negligible performance loss, is robust to the effects of the initial sampling frequency synchronization even if SFO is present in the DRM signal. In addition, we verify that the inter-cell differential correlation used between reference cells is robust to the effect of the initial SFO.

• Journal of Ecology and Environment
• /
• v.30 no.2
• /
• pp.201-207
• /
• 2007

Researchers have used a variety of methods to measure patterns of animal movement, including the use of spatial data (mapping the position of a moving animal at specified intervals) and direct estimation of travel path length by pacing under a moving animal or group. I collected movement data from five groups of siamangs (Symphalangus syndactylus) using two different methods concurrently to estimate the effects of the method of data collection on estimates of daily path length (DPL). Estimates of DPL produced from spatial data collected at 15-minute intervals were 12% lower than estimates of DPL produced by pacing under the traveling animal. The actual magnitude of the difference was correlated with the travel distance, but there was no correlation between the proportional difference and the travel distance. While the collection of spatial data is generally preferable, as spatial data permit additional analyses of patterns of movements in two or three dimensions, the relatively small difference between the DPL's produced using different methods suggests that pacing is an acceptable substitute where the collection of spatial data is impractical. I also subsampled the spatial data at increasing time intervals to assess the effect of sampling interval on the calculation of daily path lengths. Longer sampling intervals produced significantly shorter estimates of travel paths than shorter sampling intervals. These results suggest that spatial data should be collected at short time intervals wherever possible, and that sampling intervals should not exceed 30 minutes. Researchers should be cautious when comparing data generated using different methods.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.4
• /
• pp.404-414
• /
• 2014

Yield prediction is important to manage semiconductor quality. Many researches with machine learning algorithms such as SVM (support vector machine) are conducted to predict yield precisely. However, yield prediction using SVM is hard because extremely imbalanced and big data are generated by final test procedure in semiconductor manufacturing process. Using SVM algorithm with imbalanced data sometimes cause unnecessary support vectors from major class because of unselected support vectors from minor class. So, decision boundary at target class can be overwhelmed by effect of observations in major class. For this reason, we propose a under-sampling method with minor class based SVM (MCSVM) which overcomes the limitations of ordinary SVM algorithm. MCSVM constructs the model that fixes some of data from minor class as support vectors, and they can be good samples representing the nature of target class. Several experimental studies with using the data sets from UCI and real manufacturing process represent that our proposed method performs better than existing sampling methods.

• Nuclear Engineering and Technology
• /
• v.42 no.6
• /
• pp.690-703
• /
• 2010

Sampling based uncertainty analysis was carried out to quantify uncertainty in predictions of best estimate code RELAP5/MOD3.2 for a thermal hydraulic test (10% hot leg break LOCA) performed in the Large Scale Test Facility (LSTF) as a part of an IAEA coordinated research project. The nodalisation of the test facility was qualified for both steady state and transient level by systematically applying the procedures led by uncertainty methodology based on accuracy extrapolation (UMAE); uncertainty analysis was carried out using the Latin hypercube sampling (LHS) method to evaluate uncertainty for ten input parameters. Sixteen output parameters were selected for uncertainty evaluation and uncertainty band between $5^{th}$ and $95^{th}$ percentile of the output parameters were evaluated. It was observed that the uncertainty band for the primary pressure during two phase blowdown is larger than that of the remaining period. Similarly, a larger uncertainty band is observed relating to accumulator injection flow during reflood phase. Importance analysis was also carried out and standard rank regression coefficients were computed to quantify the effect of each individual input parameter on output parameters. It was observed that the break discharge coefficient is the most important uncertain parameter relating to the prediction of all the primary side parameters and that the steam generator (SG) relief pressure setting is the most important parameter in predicting the SG secondary pressure.

• Journal of Distribution Science
• /
• v.20 no.12
• /
• pp.89-98
• /
• 2022

Purpose: Due to the rapid growth of e-commerce in Thailand, the operational excellence of distribution service providers has been elevated. Thus, this research investigated the key drivers of operational performance of e-commerce distributors in Thailand. The research contains key variables: the analytics capabilities of an organization, supply chain disruption orientation, innovation capability, and operational performance. Research design, data, and methodology: An online survey is administered to top managers and key personnel (N=425) employed for at least one year in Thailand's top five e-commerce distributors. The sampling methods were conducted using purposive sampling, quota sampling, and convenience sampling. Confirmatory Factor Analysis and Structural Equation Model were applied to analyze and confirm the model's goodness-of-fit and hypothesis testing. Results: The findings reveal that an organization's analytics capabilities significantly affect supply chain disruption orientation and supply chain resilience. Furthermore, operational performance is affected by supply chain disruption, supplier quality management, and innovation capability. Nevertheless, supply chain resilience and digital supply chain have no significant effect on operational performance. Conclusions: The results imply that supply chain digitalization could drive higher operational performance. Distribution businesses are encountering transformation and disruption, which should address the high level of a digital supply chain, innovation, and quality management to maximize their profit margin and delivery service quality.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.3
• /
• pp.51-59
• /
• 2007

A reliability-based approach that can systematically model various sources of uncertainty is presented in the context of slope stability. Expressions for characterization of soil properties are developed in order to incorporate sampling errors, spatial variability and its effect of spatial averaging. Reliability analyses of slope stability with different statistical representations of soil properties show that the incorporation of sampling error, spatial correlation, and conditional simulation leads to significantly lower probability of failure than that obtained by using simple random variable approach. The results strongly suggest that the spatial variability and sampling error have to be properly incorporated in slope stability analysis.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.3 no.2
• /
• pp.1-11
• /
• 2020

Purpose: We explore to find out and analyze the direct influence of Millennial Orientation on Goals Mediated by work engagement and satisfaction. And, interaction cannot be a direct relationship between research variables. Method: The implementation uses the survey method. This research was conducted at PT. East Kalimantan fertilizer operated in Bontang, East Kalimantan. The population in this study were all employees of PT. East Kalimantan fertilizers operated in Bontang, as many as N = 500 people. The sampling technique used is proportional stratified random sampling. Findings: Millennial orientation influences engagement, job satisfaction and intention to leave, direct engagement has a significant effect on job satisfaction and intention to leave, and job satisfaction is directly related to intention to leave. Originality: Alignment between millennial goals in encouraging job satisfaction and employee engagement, so that it can have an impact on the intention to leave employees, especially at PT. Pupuk. Kaltim. Also, direct millennials as decreasing intention to leave.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.1
• /
• pp.60-72
• /
• 1994

The effect of free stream tubulence on the coherent structure in the near wake of a circular cylinder was investigated by a conditional sampling technique. The measurements were made from C.T.A. with hot wire I-probe and a Split-film sensor. Contours of phase-averaged velocity and vorticities were presented and discussed. It was found that the value of the vortex strength increased with increasing free stream turbulence which can enhance the roll-up of the shear layer.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.609-614
• /
• 1998

A new small signal modeling of an average current mode control is proposed. In order to analyze the characteristics of the control scheme, the discrete and continuous time small signal models are derived. The derivation are mainly come from the analysis of the sampling effect presented in the current control loop. By the mathematical interpretation of practical sampler representing the sampling effect of a current control loop, the small signal models of an average current mode control can be easily derived. The instability of the current control loop, which gives rise to the subharmonic oscillation, can be identified by the proposed models. To show the usefulness of the proposed models, the simulation and experiment are carried out. The results show that the predicted results by the proposed model are much better agreed with the measured ones than that of the conventional model, even though the high gain of the compensation network of a current control loop is employed.