• Journal of the Korean Statistical Society
• /
• 제6권1호
• /
• pp.3-20
• /
• 1977

In many applications one is concerned with repeated Bernoulli trials whose parameter (success probability) is usually unknown and has to be estimated from a sample. The probability distribution and statistical inference on the repeated independent Bernoulli trials have been studied extensively for the cases of fixed sample size sampling plan, and inverse binomial sampling plan in which observations are cotinued until a pressigned number of successes are obtained. See, for example, Haldane, Girschick et al., DeGroot and Johnson and Kotz.

• 대한산업공학회지
• /
• 제11권2호
• /
• pp.11-18
• /
• 1985

Three types of warranty policies are considered. They are (1) free warranty policy for repairable products, (2) free warranty policy for nonrepairable products, and (3) rebate warranty policy. Under each warranty policy, a single sampling attribute plan with non-destructive testing is considered. A sampling plan is characterized by the sample size and the acceptance number. For each case, characteristics of an optimum sampling plan are discussed and determined, which minimize the warranty cost and the corresponding quality control cost within the assigned producer's risk and consumer's risk.

• 품질경영학회지
• /
• 제30권2호
• /
• pp.152-159
• /
• 2002

An acceptance sampling plan for products manufactured from a production process with variable fraction defective is developed. We consider a situation where defective products have short lifetimes and non-defective ones never fail during the technological life of the products. An acceptance criterion which guarantee the out going quality of accepted products is derived using the prior information on the quality of products. Numerical examples are provided.

• Communications for Statistical Applications and Methods
• /
• 제3권2호
• /
• pp.151-159
• /
• 1996

The general formulas of average fraction inspected, average sample number and average outgoing quality in n-level skip-lot sampling plan are derived. Average sample number and average outgoing quality of a reference plan, three-level, five-level and ten-level skip-lot sampling plans are compared.

• 품질경영학회지
• /
• 제21권1호
• /
• pp.108-120
• /
• 1993

In this article an economic life test sampling plan is considered for repairable products when the products in each lot have the same interfailure time distribution, but the mean time between failure (MTBF) of a lot varies from lot to lot according to a known prior distribution. A cost model is constructed which consists of test cost, accept cost, and reject cost. Determination of the optimal plan which minimizes the expected average cost per lot is discussed. Numerical examples are presented to illustrate the use of the proposed sampling plans and sensitivity analyses for parameters of the prior distribution are performed.

• 품질경영학회지
• /
• 제7권2호
• /
• pp.17-21
• /
• 1979

There are many kinds of the mathematical models which are developed for choosing the economic inspection plan. The aim of this paper is to classify these mathematical models, and to examine their characteristics. The mathematical models for choosing the economic inspection plan can be classified into three groups. The first of it is the break-even analysis, the second group of the model is to choose the inspection plan so as to minimize total sampling inspection cost function, and the third group of it is the model to choose the inspection plan which maximize the profit function of the sampling inspection. As a result of examining the characteristics of this classified group of the models the model to choose the inspection plan which minimize total sampling inspection cost is more economical than the other models.

• 품질경영학회지
• /
• 제21권2호
• /
• pp.71-84
• /
• 1993

Currently the problem of air pollution caused by the motor vehicle emission is one of the most serious problems to be solved. Thus we needed the vehicle emissions audit procedure and technical innovation constraining the motor vehicle emission. The Korean Environmental Protection Agency currently audits automobiles for emissions compliance at assembly plants with multiple attribute multiple staged sampling plans. In order to establish the more reasonable audit procedure, the multiple staged sampling plan designed in this paper has been applied to the domestic vehicles by analyzing the statistic characteristics of the emission distribution. This paper summarizes the auditing procedure and develops methods for determining its statistical characteristics. Specifically, we consider how to evaluate a multiple staged sampling plan, give a procedure that efficiently estimates attribute-type probabilities from multivariate variables-type data, and quantify the effect of tightening the acceptable quality level of the sampling plan. As a result it can be proved that this audit procedure is the reasonable plan minimizing the AQL (Acceptable Quality Level) and is to be used effectively for the auditing procedure constraining the injurious gasses of the motor vehicles.

• Communications for Statistical Applications and Methods
• /
• 제17권1호
• /
• pp.89-98
• /
• 2010

In this paper, a two-stage group sampling plan based on the time truncated life test is proposed for the Weibull distribution. The design parameters such as the number of groups and the acceptance number in each stage are determined by satisfying the producer's and consumer's risks simultaneously when the group size and the test duration are specified. The acceptable reliability level is expressed by the ratio of the true mean life to the specified life. It was demonstrated from the comparison with single-stage group sampling plans that the proposed plan can reduce the average sample number or improve the operating characteristics.

• 품질경영학회지
• /
• 제8권2호
• /
• pp.15-22
• /
• 1980

This paper deals with the problem of determining a minimum cost sampling inspection plan for a single destructive testing by attribute. The cost for inspection lot is constructed by following three cost factors: (1) cost of inspection, (2) cost of accepted defective, (3) cost of rejected lot Using Hald's Bayesian approach in a single non-destructive testing, procedure's for finding the minimum cost single destructive sampling inspection plan by attribute are given. Assuming the uniform distribution as a prior-distribution and using numerical analysis by computer, a minimum cost single destructive sampling inspection plan by attribute for several lot sizes, unit cost, destructive testing cost, and salvage cost is given.

• 한국식품위생안전성학회지
• /
• 제29권1호
• /
• pp.16-20
• /
• 2014

시중에 유통 중인 샐러드와 김밥을 각각 100종 수거하여 B. cereus 함량을 정량분석하였다. 샐러드는 불검출이 54종이었으며 10 CFU/g 이하가 8종, 100 CFU/g 이하가 25종, 1,000 CFU/g 이하가 11종이었으며 1,000 CFU/g 이상인 것이 2종이었다. 샐러드의 대한 모니터링 결과 평균은 1.18 log CFU/g 이었으며 표준편차는 0.71 log CFU/g이었다. 김밥에서는 100개의 검체중 20개의 검체에서 B. cereus가 검출되었으며 평균은 1.01 log CFU/g 이었으며 표준편차는 0.71 log CFU/g이었다. 모니터링 결과를 이용하여 통계적 검체채취 방법을 수립하고자 하였다. 검체채취 방법은 국제미생물위원회에서 제공하는 검체채취프로그램인 NEW sampleplan program을 이용하였으며 검체갯수를 고정한 후 미생물 기준인 m과 M, 그리고 허용한계값인 c 값을 변화하면서 산출되는 합격률이 0.95에 가장 근사한 값을 선정하였다. 그 결과 샐러드, 김밥에서의 가장 적합한 검체채취 기준은 3분법을 사용하는 것으로 n = 5, c = 0, m = 1,000, M = 10,000과 n = 5, c = 2, m = 100, M = 1,000의 기준이 설정되었다. 특히 후자에 서술된 기준은 현재 뉴질랜드에서 즉석섭취식품에서의 B. cereus에 대한 규격으로 사용하고 있어 국제적인 경향에도 부합함을 알 수 있었다.