• Title/Summary/Keyword: Sampling Period

Search Result 1,196, Processing Time 0.024 seconds

Deadbeat Control with a Repetitive Predictor for Three-Level Active Power Filters

  • He, Yingjie;Liu, Jinjun;Tang, Jian;Wang, Zhaoan;Zou, Yunping
    • Journal of Power Electronics
    • /
    • v.11 no.4
    • /
    • pp.583-590
    • /
    • 2011
  • Three-level NPC inverters have been put into practical use for years especially in high voltage high power grids. This paper researches three-level active power filters (APFs). In this paper a mathematical model in the d-q coordinates is presented for 3-phase 3-wire NPC APFs. The deadbeat control scheme is obtained by using state equations. Canceling the delay of one sampling period and providing the predictive value of the harmonic current is a key problem of the deadbeat control. Based on this deadbeat control, the predictive output current value is obtained by the state observer. The delay of one sampling period is remedied in this digital control system by the state observer. The predictive harmonic command current value is obtained by the repetitive predictor synchronously. The repetitive predictor can achieve a better prediction of the harmonic current with the same sampling frequency, thus improving the overall performance of the system. The experiment results indicate that the steady-state accuracy and the dynamic response are both satisfying when the proposed control scheme is implemented.

Robust Deadbeat Current Control Method for Three-Phase Voltage-Source Active Power Filter

  • Nishida, Katsumi;Ahmed, Tarek;Nakaoka, Mutsuo
    • Journal of Power Electronics
    • /
    • v.4 no.2
    • /
    • pp.102-111
    • /
    • 2004
  • This paper is concerned with a deadbeat current control implementation of shunt-type three-phase active power filter (APF). Although the one-dimensional deadbeat control method can attain time-optimal response of APF compensating current, one sampling period is actually required fur its settling time. This delay is a serious drawback for this control technique. To cancel such a delay and one more delay caused by DSP execution time, the desired APF compensating current has to be predicted two sampling periods ahead. Therefore an adaptive predictor is adopted for the purpose of both predicting the control error of two sampling periods ahead and bringing the robustness to the deadbeat current control system. By adding the adaptive predictor output as an adjustment term to the reference value of half a source voltage period before, settling time is made short in a transient state. On the other hand, in a steady state, THD (total harmonic distortion) of the utility grid side AC source current can be reduced as much as possible, compared to the case that ideal identification of controlled system could be made.

The Effect of Sharia Destination Image on Developing Post-Visit Behavior: A Case Study in Indonesia

  • MARLIZAR, Marlizar;LUBIS, Abdul Rahman;UTAMI, Sorayanti;CHAN, Syafruddin
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.8 no.4
    • /
    • pp.959-969
    • /
    • 2021
  • This study aims to develop new constructs and indicators for sharia destination image, and then examine its effects on perceived value, tourist satisfaction, and post-visit behaviour. Furthermore, it analyses the mediating role of perceived value and tourist satisfaction on relationship between sharia destination image and post-visit behaviour. The population were domestic and Malaysian Muslim tourists who visited Aceh during the study period. The sampling was carried out in two stages. The first stage involved selecting most visited districts. The second stage involved randomly selecting tourists who visit during the study period in the districts. Data was collected using a structured questionnaire with a Likert scale. Also, a total of 270 questionnaires were distributed to domestic and Malaysian tourists in Aceh. Cluster sampling was used to determine the sample area, and purposive sampling technique was used to determine the study sample. Furthermore, the data analysis technique is Structural Equation Modelling. The results showed that the sharia destination image has a significant effect on perceived value. Meanwhile, the perceived value significantly influenced tourist satisfaction and post-visit behaviour. In addition, the perceived value and tourist satisfaction can mediate the effects of sharia destination image, which has no direct effect on post-visit behaviour.

The Effect of Corporate Governance on Tax Avoidance: The Role of Profitability as a Mediating Variable

  • SUNARTO, Sunarto;WIDJAJA, Budiadi;OKTAVIANI, Rachmawati Meita
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.8 no.3
    • /
    • pp.217-227
    • /
    • 2021
  • This study aims to examine the effect of institutional ownership, independent board of commissioners, audit committee, and profitability (RNOA) on tax avoidance in banking companies listed on the Indonesia Stock Exchange over the 2014-2018 period. The sampling method employed in this study was the cluster sampling method. The population was all banking companies listed on the Indonesia Stock Exchange for the period 2014-2018. The sample selection results using the purposive sampling method during the observation includes 209 companies that published complete annual reports and their financial report notes as of December 31, 2018. The results revealed that institutional ownership and independent board of commissioners did not affect profitability. Profitability also did not affect tax avoidance. Further findings showed that institutional ownership and audit committee positively affect tax avoidance. From the result of Sobel test, this study indicated that profitability cannot mediate the effect of institutional ownership, independent board of commissioners, and audit committee on tax avoidance. This study has succeeded in proving empirically that there was a significant effect of the audit committee on profitability, institutional ownership on tax avoidance, and the audit committee on tax avoidance. Therefore, this study supports the agency theory and the research model from previous studies.

The Effect of Sampling Rate on Statistical Properties of Extreme Wave (파랑자료의 sampling rate가 극한파의 통계에 미치는 영향)

  • Kim, Do Young
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.16 no.1
    • /
    • pp.36-41
    • /
    • 2013
  • In this paper time series wave data are simulated using wave spectrum with random phases of the wave signal. The simulated wave signals are used to study the effect of the sampling rate on the ocean wave characteristics. Effect of sampling rate on wave data which include extreme wave such as freak waves are examined and various wave characteristics including abnormality index (AI), kurtosis of wave profile and maximum wave height are examined. Various wave heights are decreased as the sampling rate decreases. The zero-th moment of the wave spectrum does not affect much on the sampling rate but the second moment are greately affected on the sampling rate. The error due to the sampling rate is decreases as the wave period increases. The error in significant wave height based on the wave spectrum $H_s$ is smaller than that on the time domain method $H_{1/3}$. AI index and kurtosis of wave profile do not deviate much from the exact date as long as the sampling rate is greater than 1 Hz. Ocean wave measurement with the sampling frequency higher than 1 Hz will result the error less than 5% in estimating the height of extreme waves.

Seasonal Size Distribution of Atmospheric Particles in Iksan, Korea

  • Kang, Gong-Unn;Kim, Nam-Song;Rhim, Kook-Hwan
    • Journal of Environmental Health Sciences
    • /
    • v.32 no.6
    • /
    • pp.543-555
    • /
    • 2006
  • During a twenty-day period in 2005, a nine-stage Andersen cascade impactor was used to determine the seasonal size distribution of atmospheric particles and its inorganic ion species sampled for 24hr in Iksan city, located southwest of the Korean peninsula. Samples were analyzed for major water-soluble ion species using Dionex-100 ion chromatograph. Average fine and coarse mass concentrations of atmospheric particles were, respectively, 31.4 and $82.6{\mu}g\;m^{-3}$ in spring and 35.8 and $73.4{\mu}g\;m^{-3}$ in fall-winter during the sampling period of 2005, while measurements of 69.8 and 9.9 were obtained in the sampling period of summer, The size distribution of particulate mass concentration during the non-Asian dust period was generally bimodal, whereas the size distribution of particulate mass concentration during the Asian dust period was unimodal due to the significant increase of coarse particles, which originated from long-range transport of soil dust particles from loess regions of the Asian continent. Among ionic species, $SO{_4}^{2-},\;NH{_4}^+,\;K^+$ were mainly distributed in fine particles due to their characteristics of emission sources and gas-to-particle conversion, while $Na^+,\;Mg^{2+}\;and\;Ca^{2+}$ were dominantly in coarse particles. However, $NO_3{^-}\;and\;Cl^-$ were distributed in both coarse particles and fine particles. Although $SO{_4}^{2-}$ was mainly distributed in fine particles, the size distributions of $SO{_4}^{2-}$ in coarse mode were significantly increased during the Asian dust events compared to those during the non-Asian dust period. $Ca^{2+}$ showed the most abundant species in the atmospheric particles during the Asian dust period. $NH{_4}^+$ was found to mainly exist as $(NH_4)_2SO_4$ in fine particles.

Filter-based Correction for Positive Sampling Artifacts in the Determination of Ambient Organic Carbon (여과지를 이용한 유기탄소의 측정 오차 보정)

  • Kang, Byung-Wook;Yeon, Ik-Jun;Cho, Byung-Yeol;Park, Sang-Chan;Lee, Hak-Sung;Jeon, Jun-Min;Na, Kwang-Sam
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.27 no.1
    • /
    • pp.63-72
    • /
    • 2011
  • This study describes the impact of positive sampling artifact caused by a filter-based sampling in the determination of ambient organic carbon (OC). Three different sampling media combinations were employed for this investigation: (1) Quartz filter-alone (Q-alone), (2) quartz filter behind quartz-fiber filter (QBQ), and (3) quartz filter and quartz filter behind Teflon filter (Q-QBT). The measurement of ambient OC was carried out at a semi-urban site near oceanside at the end of November of 2008. It was found that Q-alone sampling configuration resulted in a higher OC than QBQ and Q-QBT by 14% and 28%, respectively due to no correction for positive artifact caused by adsorption of gas-phase OC onto the filter. A lower quantity of OC was collected from the backup quartz filter on QBQ than that from Q-QBT. A possible explanation is that the front quartz filter of QBQ was not fully saturated with gas-phase OC during the sampling period, allowing smaller amount of gas-phase OC to reach the backup quartz filter. The contribution of positive artifact to $PM_{2.5}$ mass was approximately 2.15 ${\mu}g/m^3$ which is equivalent to 6% in terms of Q-QBT sampling configuration. The positive artifact was found to be more dominated during summer than during winter, showing temperature dependence. It was concluded that Q-QBT sampling configuration offers less impact of positive artifact on ambient OC sampling than QBQ in quantification of OC.

A Study on the Linear Encoder for the high performance Oil Off Angle control of SRM (SRM의 고성능 온, 오프 각 제어를 위한 선형 엔코더에 관한 연구)

  • 이동희;박성준;이명재;한성현;백운보;이희섭
    • Proceedings of the Korean Society of Machine Tool Engineers Conference
    • /
    • 2002.04a
    • /
    • pp.190-198
    • /
    • 2002
  • In switched reluctance motor(SRM) drive, it is necessary to synchronize the stator phase excitation with the rotor position. Therefore the rotor position information is an essential. Usually optical encoders or resolvers are used to provide the rotor position information. These sensors are expensive and are not suitable for high speed operation. In general, the accuracy of the switching angles is dependent upon the resolution of the encoder and the sampling period of the microprocessor. But the region of high speed, switching angles are fluctuated back and forth from the preset values, witch are cause by the sampling period of the microprocessor. Therefore, the low cost linear encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using the simple digital logic circuit is also presented in this paper It is verified from the experiments that the proposed encoder and logic controller can be a powerful candidate for the practical low cost SRM drive.

  • PDF

Study on the Exclusive SRM Encoder for Angle Control in Wide Region (광범위한 여자각 제어가 가능한 SRM전용 엔코더 개발)

  • Park, Sung-Jun;Kim, Jong-Dal;Shon, Mu-Heon;Kim, Gyu-Seob;Lee, Yil-Chun;Kim, Cheul-U
    • Proceedings of the KIEE Conference
    • /
    • 2001.07b
    • /
    • pp.898-900
    • /
    • 2001
  • In general, the accuracy of the switching angles is dependent upon the resolution of the encoder and the sampling period of the microprocessor. But the region of high speed, switching angles are fluctuated back and forth from the preset values, which are cause by the sampling period of the microprocessor. Therefore, the low cost linear encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using the simple analog type switching logic circuit is also presented in this paper.

  • PDF

An Efficient Network Management technique in CAN-based Control Systems Using Combined Dynamic ID Allocation and Sampling Period Decision Algorithm (동적 ID 할당과 샘플링 주기 결정 기법을 결합한 CAN 기반 제어시스템의 효율적인 네트워크 관리기법)

  • Ki, Young-Hun;Ahn, Boung-Ju;Jeong, Gu-Min;Ahn, Hyun-Sik;Kim, Do-Hyun
    • Proceedings of the KIEE Conference
    • /
    • 2007.04a
    • /
    • pp.125-127
    • /
    • 2007
  • 현재 차량 내 네트워크에서 주로 쓰이는 CAN 프로토콜은 네트워크 내에 다수의 노드가 연결되어 동작하는 경우 우선순위가 낮은 메시지의 전송지연이 심각하게 발생할 수 있다. 이를 해결하기 위해 다양한 제어 방법들이 제안되어 시험되고 있는데, 본 논문에서는 동적 ID 차당 기법을 연로전지 하이브리드 자동차 네트워크 시스템에 적용하여 각 장치들간의 메시지 전송 지연문제를 해결 하며, 또한 이로 인해 발생하는 차량 내 네트워크 시스템의 수행 주기 변화의 문제점을 샘플링 주기 결정 기법을 이용하여 효율적으로 해결하였다.

  • PDF