• Korea-Australia Rheology Journal
• /
• 제15권2호
• /
• pp.55-61
• /
• 2003

The steady shear flow properties of vaseline generally used as a base of the pharmaceutical dosage forms were studied in the consideration of wall slip phenomenon. The purpose of this study was to show that how slip may affect the experimental steady-state flow curves of semisolid ointment bases and to discuss the ways to eliminate (or minimize) wall slip effect in a rotational rheometer. Using both a strain-controlled ARES rheometer and a stress-controlled AR1000 rheometer, the steady shear flow behavior was investigated with various experimental conditions ; the surface roughness, sample preparation, plate diameter, gap size, shearing time, and loading methods were varied. A stress-controlled rheometer was suitable for investigating the flow behavior of semisolid ointment bases which show severe wall slip effects. In the conditions of parallel plates attached with sand paper, treated sample, smaller diameter fixture, larger gap size, shorter shearing time, and normal force control loading method, the wall slip effects could be minimized. A critical shear stress for the onset of slip was extended to above 10,000 dyne/$\textrm{cm}^2$. The wall slip effects could not be perfectly eliminated by any experimental conditions. However, the slip was delayed to higher value of shear stress by selecting proper fixture properties and experimental conditions.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.663-667
• /
• 2006

CTAB(cetyltrimethylammonium bromide)-capped CdSe nanoparticles were prepared by using a 4 : 1(v/v) distilled water-isopropyl alcohol mixture. The cadmium chloride and sodium selenosulfate were used as the cadmium and selenium source. By the analysis of XRD and XPS, the resultant particle was confirmed to be cubic CdSe phase. TEM image showed CdSe nanoparticles with empty core. The CTAB-capped sample showed an maximum absorption at 418nm, blue-shifting compared with bulk CdSe, which indicated stronger quantum confinement effect compared with uncapped sample. From FT-IR analysis, it was found that the presence of the new peaks in the $850{\sim}1250cm^{-1}$ range indicated the existence of chemical bonding between CTAB and surface of CdSe nanoparticles. Also TG analysis indicated that there were two weight-loss steps for the CTAB-capped CdSe nanoparticles. It was suggested that CTAB played a significant role in protecting CdSe nanoparticles.

• 분석과학
• /
• 제21권3호
• /
• pp.229-236
• /
• 2008

본 연구에서 HCl을 처리하지 않고 혹은 HCl 처리한 표면 처리된 MWCNT 및 TNB를 이용하여 $C/TiO_2$ 복합체를 제조하였다. XRD 결과 값으로부터 모두 시료에 한 가지 결정 구조 즉 anatase형을 존재하고 있음을 알 수 있었다. SEM 사진으로부터 $TiO_2$ 입자와 CNT는 균일하게 분포하고 있음을 알 수 있었다. EDX 결과에서, 모두 시료에 C, O, Al와 Ti 피크를 볼 수 있으며, 특히 시료 CT에 있는 C와 Ti의 함량은 시료 HCT에 있는 것보다 많게 나타났다. 마지막으로, $C/TiO_2$ 복합체는 $TiO_2$보다 더 좋은 광촉매 특성을 가지고 있음을 알 수 있었다.

• 분석과학
• /
• 제36권5호
• /
• pp.205-215
• /
• 2023

In the present study, an analytical method was proposed for detecting trifluralin in aquatic products at trace concentrations. The method employed QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) and gas chromatography coupled with tandem mass spectrometry (GC-MS/MS) as the sample preparation and measurement, respectively. The effect of the aqueous phase volume used in the QuEChERS was demonstrated, and the ratio of 10:10 (mL) between water and acetonitrile phase was used for 5 g of sample. Besides, dSPE using C18 and primary-secondary amine (PSA) was applied to remove the potential interferences from the food matrices, indicating no remarkable analyte loss. The linear range was built up from 0.50 ㎍ L^-1 to 3.0 ㎍ L^-1 (R² = 0.9993). Other criteria, i.e., repeatability (RSD_r = 0.86-1.96 %), reproducibility (RSD_R = 1.09-2.01 %), and recovery (over 90 %), were in accordance with Appendix F of AOAC (2016) for method performance. Although no trifluralin was detected for the commercial samples (fish, shrimp, and breaded shrimp), the spiked samples performed favorable recoveries and precision.

• Carbon letters
• /
• 제13권2호
• /
• pp.130-132
• /
• 2012

In this study, cobalt oxide ($Co_3O_4$)/graphene composites were synthesized through a simple chemical method at various calcination temperatures. We controlled the crystallinity, particle size and morphology of cobalt oxide on graphene materials by changing the annealing temperatures (200, 300, $400^{\circ}C$). The nanostructured $Co_3O_4$/graphene hybrid materials were studied to measure the electrochemical performance through cyclic voltammetry. The $Co_3O_4$/graphene sample obtained at $200^{\circ}C$ showed the highest capacitance of 396 $Fg^{-1}$ at 5 $mVs^{-1}$. The morphological structures of composites were also examined by scanning electron microscopy and transmission electron microscopy (TEM). Annealing $Co_3O_4$/graphene samples in air at different temperatures significantly changed the morphology of the composites. The flower-like cobalt oxides with higher crystallinity and larger particle size were generated on graphene according to the increase of calcination temperature. A TEM analysis of the composites at $200^{\circ}C$ revealed that nanoscale $Co_3O_4$ (~7 nm) particles were deposited on the surface of the graphene. The improved electrochemical performance was attributed to a combination effect of graphene and pseudocapacitive effect of $Co_3O_4$.

• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1110-1114
• /
• 2001

열화학기상증착법으로 탄소나노튜브를 합성할 때, 촉배전구체로 사용하는 Fe(NO$_3$)$_3$.9$H_2O$-Al(OH)$_3$혼합물을 믹서밀을 이용하여 혼합분쇄한 후, 이 혼합물을 사용하영 합성에 미치는 메카노케미컬 효과를 조사하였다. SEM과 TEM 관찰 결과, 분쇄된 촉매 위에서 합성된 탄소생성물이 미분쇄 촉매위에서 성장한 생성물에 비해 훨씬 균일했으며, 대부분의 생성물이 탄소나노튜브로서 존재하였다. 또한, 전류-전압 측정을 통해서, 분쇄 촉매에서의 생성물의 전계 방출 특성이 미분쇄 촉매에서보다 우수함을 확인하였다.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.433-438
• /
• 2011

In this study, CdS combined activated carbon/$TiO_2$ (CdS-AC/$TiO_2$) composites were prepared by a sol-gel method to improve the photocatalytic performance of $TiO_2$. These composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and UV-vis analysis. The photocatalytic activities were examined by the degradation of methylene blue (MB) under visible light irradiation. The photodegradation rate of MB under visible light irradiation reached 90.1% in 120 min. The kinetics of MB degradation was plotted alongside the values calculated from the Langmuir-Hinshelwood equation. The 0.2 CAT sample showed the best photocatalytic activity, which might be due to an increase in the photo-absorption effect by activated carbon and the cooperative effect of CdS.

• Fisheries and Aquatic Sciences
• /
• 제2권1호
• /
• pp.8-11
• /
• 1999

The optimum boiling condition was determined for fish extracts by response surface model. Model equations were designed with effect of time (T) and the amount of added water (W) on the level of released free amino acid. Based on the high (>0.9) coefficient of determination and low (<0.01) level of significant, those model was approved to be significant. The added water amount of higher regression coefficient $ (\beta_2)$, showed a greater influence on releasing free amino acids than boiling time. The optimum boiling times are 6 hours for crucian carp, 5 hours for bastard halibut, 7 hours for loach and 5 hours for jacopever. The ratio of added water to sample 1 (v/w) could be applied to all fish samples at $100\pm2^{\circ}C$.

• 한국응용과학기술학회지
• /
• 제12권1호
• /
• pp.59-67
• /
• 1995

Oil dispersants using polyoxyethylene monooleate, polyoxyethylene oleylether, and poly(oxypropylene-oxyethylene)glycol block copolymer were prepared, and oil dispersant efficiency was measured using vertical shaking flask method to 4 kinds of Bunker B oil with different physical properties by appling the prepared dispersants. Although the dispersant efficiency was differed according to the differences of physical properties of Bunker B oil, the dispersant prepared using polyoxyethylene oleylether was the most effective to disperse the oil into water. The impurities like surfur contained in sample oil have to be removed by filteration to obtain the correct degree of absorption using UV spectrophotometer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.578-581
• /
• 1999

The Co-Cr-Ta films are one of the most suitable candidates for perpendicular magnetic recording media. The facing targets sputtering(FTS) system has a advantage of preparing films over a wide range of working gas pressure on plasma-free substrates. In this study, we investigated the effect underlayers on the growths layers of Co-Cr-Ta recording layers. The Co-Cr-Ta/Ti(CoCr) double layers were deposited with sputter gas pressure$(P_N, 0.3-1mTorr)$ by using FTS apparatus at temperature of$40^{\circ}C~-300^{\circ}C$, respectively. Crystallographic and magnetic characteristics were evaluated by x-ray diffractometry(XRD) and vibrating sample magnetometer(VSM), respectively.