• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.2
• /
• pp.176-180
• /
• 2006

[ $(Na_{0.5}Bi_{0.5})TiO_3$ ][NBT] thin films were prepared on a highly (100) oriented $LaNiO_3[LNO]$ by sol-gel process. X-ray diffraction patterns of the NBT films annealed above $600^{\circ}C$ for 5 minutes have confirmed a highly (100) oriented growth and pseudocubic structure (a=3.884${\AA}$). The (l00) orientation factor increased from 90 to $99\%$ with increasing soaking time from 5 to 60 minutes at $600^{\circ}C$. The NBT films ($600^{\circ}C$/5 min,) have a flat and dense microstructure with large columnar grains, and their grain size are about 44 nm. The Au/NBT/LNO/Si hetero structure sample show a ferroelectric properties.

• Journal of Magnetics
• /
• v.19 no.4
• /
• pp.333-339
• /
• 2014

Single crystal growth of $BaFe_{12}O_{19}$ by the solid state crystal growth method was attempted. Seed crystals of ${\alpha}-Fe_2O_3$ were pressed into pellets of $BaFe_{12}O_{19}$ + 2 wt% $BaCO_3$ and heat-treated at temperatures between $1150^{\circ}C$ and $1250^{\circ}C$ for up to 100 hours. Instead of single crystal growth taking place on the seed crystal, BaO diffused into the seed crystal and reacted with it to form a polycrystalline reaction layer of $BaFe_{12}O_{19}$. The microstructure, chemical composition and structure of the reaction layer were studied using scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), x-ray Diffraction (XRD) and micro-Raman scattering and confirmed to be that of $BaFe_{12}O_{19}$. XRD showed that the reaction layer shows a strong degree of orientation in the (h00)/(hk0) planes in the sample sintered at $1200^{\circ}C$. $BaFe_{12}O_{19}$ layers with a degree of orientation in the (hk0) planes could also be grown by heat-treating an ${\alpha}-Fe_2O_3$ seed crystal buried in $BaCO_3$ powder.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.9 no.1
• /
• pp.29-34
• /
• 1985

The purpose of this study was to investigate two aspects of high school boys' clothing attitudes as compared with their family value orientations and sex role attitudes. Family value orientations were measured through the Home Environment Inventory (Won Sik Jung: 1970). Sex role attitudes were measured through Osmond and Martin's Sex Role Attitude Scale. Clothing Attitudes: 1) Clothing Modesty was assessed by means of Kim; Won: Kim: and Lee's questionnaires, 2) Clothing Importance n?as assessed by means of Jung: Park: ana. Kirby'a questionnaires. The questionnaires were administered to a sample of 561 senior high school boys in Seoul. The data was analyzed by correlation. The results were as follows: 1) Traditional family value orientation was positively related to Clothing Modesty. 2) Materialistic family value orientation was positively related to Clothing Importance. 3) Sex role attitudes were not related to Clothing Importance and Clothing Modesty. 4) The attitude for the clothes controlled to wear is different with each other among the students, parents and teachers.

• Journal of the Korean Data and Information Science Society
• /
• v.11 no.2
• /
• pp.189-199
• /
• 2000

A major deficiency of laboratory testing of rock structure is that the structures are limited in size and therefore present a very small and highly selective sample of the rock mass from which were removed. In a typical engineering project, the samples tested in the laboratory represent only a very small fraction of one percent of the volume of the rock mass. In this paper, we calculate the representative orientation of the resultant vector, the measure of the degree of clustering, the volume of rock mass, the trace length of discontinuity spacing under underlying distributions. And we generate the random fracture networks using real data. We propose the calculating the trace length.

• Journal of the Korean Wood Science and Technology
• /
• v.11 no.1
• /
• pp.5-11
• /
• 1983

This paper aims at gaining the informations atout the fibril angle at secondary walls of tracheids. The test specimens were taken from disks on stem wood of "Pinus koraiensis Sieb. et zucc". The method of measuring the fibirl angle was selected so-called "iodine method" that crystalline aggregates of iodine may be induced to form within the elongated interstices of the cellulose matrix of the secondary wall and that these elongated crystals are oriented parallel to the long axies of the fibrills of cellulose. The following conclusions may be drawn from the results of this investigation. 1) Gross average fibril angle was about $17.6^{\circ}$ on stem wood. 2) Its values seem to be greater for earlywood (avg.$19.8^{\circ}$) than for latewood tracheids (avg.$15.3^{\circ}$) in normal wood. 3) According to the increase of annual ring from pith to barks the orientation of fibril angle seems to be decrease gradually in normal wood. 4) In the case of height variation in trees the sample trees have a tendency to increase the orientation fibril angle to the increase of tree height in stem.

• Journal of Powder Materials
• /
• v.25 no.4
• /
• pp.331-335
• /
• 2018

This study investigates the directional recrystallization behavior of Ni based oxide dispersion strengthened (ODS) alloy according to the zone annealing velocity. The zone annealing temperature is set as $1390^{\circ}C$, while the zone velocities are set as 2.5, 4, 6, and 10 cm/h, respectively. The initial microstructure observation of the as-extruded sample shows equiaxed grains of random orientation, with an average grain size of 530 nm. On the other hand, the zone annealed samples show a large deviation in grain size depending on the zone velocities. In particular, grains with a size of several millimeters are observed at 2.5-cm/h zone velocity. It is also found that the preferred orientation varies with the zone annealing velocity. On the basis of these results, this study discusses the role of zone velocities in the directional recrystallization of Ni base ODS alloy.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.15 no.2
• /
• pp.23-41
• /
• 2004

This study aimed at categorizing food product consumer's life types, understanding properties of each type, identifying differences in the food consumption pattern, and suggesting a strategical plan to implement market segmentation for the future food products. A demonstrative analysis revealed that consumption tendencies of the sample group in the Busan area could be categorized into four types-popular brand orientation, convenience and practicality orientation, and change and innovation oriention; an analysis of demographical differences in each group demonstrated that variabes of age and family formation showed a significant difference within a significant level. A test of differences in the significance among food consumption types in each group demonstrated that there was no signifcant difference in the number of dining-out, average cost of dining-out per person, dining-out of the week, cost of dinner, and attributes of food service selection. To the contrary, there was a significant difference in the purpose of dining-out, place of lunch, cost of lunch, menu of dinner, and food service information medium among consumption tendencies of each within a significant level.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.6
• /
• pp.185-188
• /
• 2009

The effects of the growth temperature on the properties of ZnO thin films were investigated by using X-ray diffraction, scanning electron microscopy, ultraviolet-visible spectrophotometry, and Hall measurements. The ZnO films were deposited by rf magnetron sputtering at various growth temperatures in the range of 100-$400{^{\circ}C}$. A strong c-axis preferred orientation is observed for all of the samples. As the growth temperature increases, the crystalline orientation of the ZnO (002) plane is not changed, but the full width at half maximum gets smaller. The dependence of the electron concentration, mobility, and resistivity on the growth temperature exhibits that the ZnO films have a higher electron concentration at higher temperatures, thus giving them a low resistivity. The optical transmittance and band gap energy, calculated from the spectra of optical absorbance, show a significant dependence on the growth temperature. As for the sample grown at $100{^{\circ}C}$, the average transmittance is about 90% in the visible wavelength range and the band gap is estimated to be 3.13 eV.

• Journal of Fashion Business
• /
• v.19 no.5
• /
• pp.157-174
• /
• 2015

This research intends to observe the effects of social capital regarding fashion social enterprises on the community sense of participating consumers, and verify the relationship of the effects that such social capital and community sense have on sustainability formation variable(shared values, suitability of values, behavioral flow, cognitive belief and long-term relationship orientation) of social enterprises. For such analysis, a sample of 400 consumers with experience of purchasing products of fashion social enterprises more than once was utilized, and path analysis was conducted utilizing AMOS 20.0. As a result of this research, first, information sharing, social participation among the characteristic factors of social enterprises' social capital had a meaningful impact on shared values, and self-pursuit and significance meaningfully affected the suitability of values. Second, mutual influence, sense of belonging, satisfaction of needs and emotional bond among the characteristic factors of community sense between social enterprises and consumers meaningfully affected shared values, whereas mutual influence, sense of belonging and emotional bond substantially influenced suitability of values. Third, shared values and suitability of values affected the relationship between behavioral flow and cognitive trust, and behavioral flow and cognitive trust both had meaningful impact on long-term relationship orientation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.5
• /
• pp.418-422
• /
• 1998

The Co-Cr films are one of the most suitable candidates for perpendicular magnetic recording media. The facing targets sputtering(FTS) system has a advantage of preparing films over a wide range of working gas pressure on plasma-free substrate. In this study, we investigated the possibility of employing FTS system for depositing Co-Cr films. The Co-Cr thin films were deposited with various sputter gas pressure($P_Ar$, 0.1~10mTorr) by using FTS apparatus at temperature of $40^{\circ}C and 220^{\circ}C$, respectively. Crystallographic and magnetic characteristics were evaluated by x-ray diffractometry (XRD) and vibrating sample magnetometer(VSM), respectively. Under argon gas pressure at 0.1mTorr, films with morphologically dense microstructure, good c-axis orientation and higher coercivity were obtained. It has been confirmed that the FTS system is very useful for preparing Co-Cr thin film recording media.