• Imaging Science in Dentistry
• /
• v.33 no.2
• /
• pp.79-83
• /
• 2003

Purpose : To assess the relationship between the direction of the indicating rod of the radiographic stent for ideal prosthetic design and the actual possible path of implant fixture placement when residual ridge resorption is considered. Materials and Methods: The study materials consisted of 326 implant sites (male 214 cases and female 112 cases) from a total of 106 patients (male 65 patients and female 41 patients) who desired implant prostheses. Computed tomography of patients were taken and reformatted using ToothPix/sup (R)/ software. Bony defects, bony sclerosis, the change of the direction of indicating rod, and root proximity of the adjacent teeth were examined on the CT-derived images. Results: The rate of the irregular crestal cortex was relatively high on premolar and molar area of maxilla. Mandibular molar area showed relatively high rate of focal sclerosis on the area of implant fixture insertion. The position of the indicating rods were relatively acceptable on the molar areas of both jaws. However, the position of the indicating rods should be shifted to buccal side with lingual rotation of the apical end on maxillary anterior teeth and premolar area. Conclusion: Clinically determined rod direction and position of the indicating rod for implant placement was not always acceptable for insertion according to the reformatted CT images. The pre-operative treatment plan for implant should be determined carefully, considering the state of the alveolar bone using the reformatted CT images.

• Imaging Science in Dentistry
• /
• v.33 no.2
• /
• pp.113-119
• /
• 2003

Purpose : To evaluate the relationship between morphometric analysis of bone microstructure from digital radiographic image and trabecular bone strength. Materials and Methods : One hundred eleven bone specimens with 5 mm thickness were obtained from the mandibles of 5 pigs. Digital images of specimens were taken using a direct digital intraoral radiographic system. After selection of ROI (100 × 100 pixel) within the trabecular bone, mean gray level and standard deviation were obtained. Fractal dimension and the variants of morphometric analysis (trabecular area, periphery, length of skeletonized trabeculae, number of terminal point, number of branch point) were obtained from ROI. Punch sheer strength analysis was performed using Instron (model 4465, Instron Corp., USA). The loading force (loading speed 1 mm/min) was applied to ROI of bone specimen by a 2 mm diameter punch. Stress-deformation curve was obtained from the punch sheer strength analysis and maximum stress, yield stress, Young's modulus were measured. Results: Maximum stress had a negative linear correlation with mean gray level and fractal dimension significantly (p<0.05). Yield stress had a negative linear correlation with mean gray level, periphery, fractal dimension and the length of skeletonized trabeculae significantly (p < 0.05). Young's modulus had a negative linear correlation with mean gray level and fractal dimension significantly (p < 0.05). Conclusions : The strength of cancellous bone exhibited a significantly linear relationship between mean gray level, fractal dimension and morphometric analysis. The methods described above can be easily used to evaluate bone quality clinically.

• Imaging Science in Dentistry
• /
• v.46 no.2
• /
• pp.103-108
• /
• 2016

Purpose: The current study investigates the feasibility of a platform for a nationwide dose monitoring system for dental radiography. The essential elements for an unerring system are also assessed. Materials and Methods: An intraoral radiographic machine with 14 X-ray generators and five sensors, 45 panoramic radiographic machines, and 23 cone-beam computed tomography (CBCT) models used in Korean dental clinics were surveyed to investigate the type of dose report. A main server for storing the dose data from each radiographic machine was prepared. The dose report transfer pathways from the radiographic machine to the main sever were constructed. An effective dose calculation method was created based on the machine specifications and the exposure parameters of three intraoral radiographic machines, five panoramic radiographic machines, and four CBCTs. A viewing system was developed for both dentists and patients to view the calculated effective dose. Each procedure and the main server were integrated into one system. Results: The dose data from each type of radiographic machine was successfully transferred to the main server and converted into an effective dose. The effective dose stored in the main server is automatically connected to a viewing program for dentist and patient access. Conclusion: A patient radiation dose monitoring system is feasible for dental clinics. Future research in cooperation with clinicians, industry, and radiologists is needed to ensure format convertibility for an efficient dose monitoring system to monitor unexpected radiation dose.

• Imaging Science in Dentistry
• /
• v.39 no.3
• /
• pp.133-147
• /
• 2009

Purpose : To investigate the reproducibilities and compare the measurements in digital and MDCT-synthesized cephalometric radiograph, and to investigate the effect of head position on the measurement during imaging with MDCT. Materials and Methods : Twenty-two dry skulls (combined with mandible) were used in this study. Conventional digital cephalometric radiograph was taken in standard position, and MDCT was taken in standard position and two rotated position ($10^{\circ}$ left rotation and $10^{\circ}$ right tilting). MDCT data were imported in $OnDemand^{(R)}$ and lateral cephalometric radiograph were synthesized from 3D virtual models. Two types of rotated MDCT data were synthesized with default mode and with corrected mode using both ear rods. For all six images, sixteen angular and eleven linear measurements were made in V-$Ceph^{(R)}$ three times. Reproducibility of measurements was assessed using repeated measures ANOV A and ICC. Linear and angular measurements were compared between digital and five MDCT-synthesized images by Student t-test. Results : All measurements in six types of cephalometric radiograph were not statistically different under ICC examination. Measurements were not different between digital and MDCT-synthesized images (P>.05). Measurements in MDCT-synthesized image in $10^{\circ}$ left rotation or $10^{\circ}$ right tilting position showed possibility of difference from digital image in some measurements, and possibility of improvement via realignment of head position using both ear rods. Conclusion : MDCT-synthesized cephalometric radiograph can substitute conventional cephalometric radiograph. The error on head position during imaging with MDCT have possibility that can produce measurement errors with MDCT-synthesized image, and these position error can be corrected by realignment of the head position using both ear rods.

• Journal of the Korean Ceramic Society
• /
• v.39 no.9
• /
• pp.846-850
• /
• 2002

A PMN-PT-BT/Ag composite was prepared by surface modification with MgO sol with hoping to suppress silver's migration during sintering. The mixture of PbO, $N_2O_5,\;TiO_2\;with\;Mg(NO_3)_2$ instead of MgO was ball milled, the solvent was removed and then the dried powders were calcined at 950$^{\circ}C$/1h. The calcined powder were treated with 3.0 mol% $Ag_2O$ and 1.0 wt% MgO sol and calcined at 550$^{\circ}C$/1h. The dielectrics sintered at 1000$^{\circ}C$/4h under a flowing oxygen showed the density of 7.84g/$cm^3$, the room temperature dielectric constant of 18400, the dielectric loss of 2.4%, the specific resistivity of $0.24{\times}10^{12}{\Omega}{\cdot}cm$. It also showed the bending strength of $120.7{\pm}11.26$ MPa and the fracture toughness of $0.87{\pm}0.002\;MPam^{1/2}$ which were comparable to commercial PZT. The microstructure sonsisted of grains of ∼4${\mu}m$. SEM and SIMS analysis showed that Ag grew as ∼1${\mu}m$ and excess MgO as ∼0.5${\mu}m$.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.1
• /
• pp.93-97
• /
• 2006

To investigate whether GyeongshinhaeGihwan 1(GGT1), an anti-obesity herbal medicine widely used in oriental medicine, regulates the expression of obesity-related genes, we measured the changes in mRNA levels of these genes by GGT1 in human growth hormone transgenic (hGHTg) obese male rats, and these effects by GGT1 were compared with those of reductil (RD), an anti-obesity drug approved by FDA. Rats received once daily oral administrations of autoclaved water, RD, or GGT1 for 8 weeks. At the end of study, rats were sacrificed and tissues were harvested. Total RNA from adipose tissue, liver and kidney was prepared and the mRNA levels for LPL (lipoprotein lipase), PPAR $\gamma$ (peroxisome proliferator activated receptor-gamma), PPAR$\delta$ (peroxisome proliferator activated receptor-delta), leptin, TNF$\alpha$ (tumor necrosis factor-alpha), and internal standard G3PDH (glyceraldehyde-3- phosphate dehydrogenase) were analyzed by RT-PCR. PPAR$\gamma$ mRNA levels of liver and kidney were decreased in drug-treated groups compared with control group and the decrease of PPAR$\gamma$ expression was more prominent in GGT1 group than in RD group, suggesting that GGT1 is effective in the inhibition of adipogenesis and lipid storage by decreasing the PPAR$\gamma$ expression. In contrast, PPAR$\delta$ mRNA levels of adipose tissue and kidney were increased by RD and GGT1 , and the magnitudes of increase were higher in GGT1 group than in RD group, indicating that GGT1 stimulates fatty acid oxidation and energy metabolism by activating PPAR$\delta$ expression, Compared with control and RD groups, GGT1 group had higher concentrations of serum leptin, a well-known inhibitor of appetite. However, The mRNA levels of leptin, LPL, and TNF$\alpha$ were not changed by GGT1 and RD, compared with DW. These results demonstrate that GGT1 not only decreases PPAR$\gamma$ expression of liver and kidney, but also increases PPAR$\delta$ expression of adipose tissue and kidney, leading to the regulation of obesity and that these effects were more pronounced in GGT1 group compared with RD group. In addition, GGT1 seems to prevent obesity by increasing the serum leptin levels.

• Korean Journal of Food Science and Technology
• /
• v.50 no.6
• /
• pp.572-580
• /
• 2018

Biologically active substances including gamma-aminobutryric acid (GABA) were added into whey by co fermentation using Bacillus subtilis HA and Lactobacillus plantarum EJ2014. The first fermentation using B. subtilis HA with 5% monosodium glutamate (MSG) and 2% glucose enhanced the production of poly-${\gamma}$-glutamic acid (PGA), resulting in higher consistency of $4.09Pas^n$ as well as whey protein peptides. After the second fermentation using L. plantarum EJ2014, the remaining MSG (3.40%) as a precursor was completely converted to 2.21% GABA. Furthermore, the lactose content in whey decreased from 6.73 to 3.68% after co-fermentation, and the tyrosine content increased from 20.47 to 38.24%. Peptides derived of whey proteins were confirmed by SDS-PAGE. Viable cell counts of B. subtilis and L. plantarum were 5.83 log CFU/mL and 9.20 log CFU/mL, respectively. Thus, co-fermentation of whey could produce the novel food ingredient fortified with biologically active compounds including GABA, ${\gamma}$-PGA, peptides, and probiotics.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.5
• /
• pp.495-501
• /
• 1994

This experiment was carried out to investigate the proper seeding methed for direct seeding culture of rice in puddled soil at ill-drained paddy field. Mangeumbyeo was seeded on May 11 with drill seeder attached to cultivater, dibbling seeder attached to transplanter and power dust blower. And to determine the proper flooding time after seeding, Mangeumbyeo was seeded on May 7 and June 1 with drill seeder. Emergence ratio wasn't significantly different between drill seeder seeding and dibbling seeder seeding but emergence was very low with power dust blower. Working hour for seeding was shortened in the order of power dust blower, drill seeder and dibbling seeder, and these seeding methods saved the working hour remarkably compared with machine transplanting of infant seedling by omitting the procedures of raising seedling and transplanting. Lodging occurred slightly in all seeding methods. However, yield wasn't significantly different between machine transplanting of infant seeding and direct seeding culture in puddled soil except power dust blower. When field was flooded on seeding date, the emergence period was shortened, emergence ratio was increased and weed occurrence was decreased. Yield was highest when flooding was done on seeding date as the number of panicle per m$^2$ and the number of spikelets per m$^2$ were higher than any other flooding time.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.212-220
• /
• 1995

The optimum seeding date and the suitable seeding period for puddled drill seeding of rice at southern plain area were determined by using Sinunbongbyeo (early maturing variety), Hwaseongbyeo(medium maturing var.) and Dongjinbyeo (late medium maturing var.) at National Honam Agricultural Experiment Station from 1993 to 1994, Seedling stand was decreased significantly at seeding on April 25 in all varieties, Threshold seed-ing dates for stable ripening was estimated as June 10 in Sinunbongbyeo, May 31 in Hwaseongbyeo and May 25 in Dongjinbyeo, The 1,000 grain weight and the ripened grain rate were highest at seed-ing on May 10 or May 25 in all varieties, and decreased significantly at seeding on June 25 in Sinunbongbyeo and seeding after June 10 in Hwaseongbyeo and Dongjinbyeo, The optimum average air temperature for 40 days after heading was 22.6$^{\circ}C$ for highest ripening rate and 22.0$^{\circ}C$ for heaviest 1,000 grain weight. The optimum seeding date for highest yield was May 9 in Dongjinbyeo, May 13 in Hwaseongbyo and May 15 in Sinunbongbyeo.

• Tuberculosis and Respiratory Diseases
• /
• v.80 no.2
• /
• pp.169-178
• /
• 2017

Background: The purpose of this study was to assess the effect of our new video-assisted asthma education program on patients' knowledge regarding asthma and asthma control. Methods: Adult asthmatics who were diagnosed by primary care physicians and followed for at least 1 year were educated via smart devices and pamphlets. The education sessions were carried out three times at 2-week intervals. Each education period lasted at most 5 minutes. The effectiveness was then evaluated using questionnaires and an asthma control test (ACT). Results: The study enrolled 144 patients (mean age, $56.7{\pm}16.7years$). Half of the patients had not been taught how to use their inhalers. After participating in the education program, the participants' understanding of asthma improved significantly across all six items of a questionnaire assessing their general knowledge of asthma. The proportion of patients who made errors while manipulating their inhalers was reduced to less than 10%. The ACT score increased from $16.6{\pm}4.6$ to $20.0{\pm}3.9$ (p<0.001). The number of asthmatics whose ACT score was at least 20 increased from 45 (33.3%) to 93 (65.3%) (p<0.001). The magnitude of improvement in the ACT score did not differ between patients who received an education session at least three times within 1 year and those who had not. The majority of patients agreed to the need for an education program (95.8%) and showed a willingness to pay an additional cost for the education (81.9%). Conclusion: This study indicated that our newly developed education program would become an effective component of asthma management in primary care clinics.