• Journal of Power System Engineering
• /
• v.11 no.4
• /
• pp.72-77
• /
• 2007

It is known that elimination of ship engine room noise is impossible thing, so the working environment in the engine room is getting worse because ships are recently built with huge engines to take higher sailing power. In the yacht and cruise yacht, the engine room noise is more serious because they have bigger engines relative to their hull sizes. The noise generated from the main engine makes the employee to hearing loss and the transmitted noise make the uncomfortable conditions in the cabins of ship. The noise generated by ship engine must be attenuate for the employee and passenger. In yacht and cruise yacht, the noise levels in cabines are the most important criterions to the value of commodities. In this study, the noise absorbtion barrier which have resonators is experimentally studied by the 1/3 octave band noise elimination rates(%).

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.375-379
• /
• 2006

The keel attached on bottom of hull part prevents yacht from flowing sideway by sailing posture. The keel remove a heel moment and make the force of stability. The selection of suitable keel is important bemuse it has an influence on the safety. Also the appendage attached on bottom of keel part lower ballast weight center and have influence on hull stability. The optimum shape about the keel is very important. So this study has compared with characteristics of resistance depending on the shape of the lower part of fin keel in the same surface of water submersion, we have attached three different types of models of lower part of fin keels to the model ships using circulating water channel and analyzed resistance characteristics per shape to arrive at the optimum shape of reduction of resistance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.235-239
• /
• 2006

The keel attached on bottom of hull part prevents yacht from flowing sideway by sailing posture. So this study has compared with characteristics of resistance depending on the shape af the lower part of fin keel in the same surface af water submersion, we have attached three different types of models of lower part of fin keels to the model ships using circulating water channel and analyzed resistance characteristics per shape to arrive at the optimum shape of reduction of resistance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.531-542
• /
• 2017

The structural safety of small craft, such as steel ships and FRP ships, can be estimated using the measurement test of the hull plate thickness or the longitudinal bending strength test. A polyethylene boat is made using inexpensive HDPE and can be mass produced. The structural safety of a polyethylene boat cannot be guaranteed because a polyethylene boat hull is notspecified in the KR technical rules. The inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 propose the structural strength required for small crafts as the drop test height. Therefore, in this study, the drop test of a polyethylene boat hull was carried out based on the inspection procedure of a sailing yacht and pleasure boat and the drop test method of ISO standard 12215-5. The drop load was acquired by the drop acceleration ofa boat hull. Structural analysis and safety of a polyethylene boat were performed by the drop load and allowable stress criteria. The calculation results of the hull plate thickness by structural design specification of ISO standard 12215-5 showed that polyethylene boat hull was more than two times thicker than a steel ship hull and the boat hull determined by the inspection procedure of sailing yacht and pleasure boat and drop test method of ISO standard 12215-5 was more than 1.2 times thicker than the boat hull determined by structural design specification of ISO standard 12215-5. Therefore, inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 was much more conservative than the structural design specification of ISO standard 12215-5 and could be used as the structural design method of a polyethylene boat.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.125-133
• /
• 2006

It is important to understand flow characteristics and performances of sails for both sailors and designers who want to have efficient thrust of yacht In this Paper the viscous flows around sail-like rigid wings, which are similar to main and jib sails of a 30 feet sloop, are calculated using a CFD tool. Lift, drag and thrust forces are estimated for various conditions of gap distance between the two sails and the center of effort of the sail system is obtained. Wind tunnel experiments are also carried out to measure aerodynamic forces acting on the sails system and to validate the computation. It is found that the combination of two sails produces the lift force larger than the sum of that produced separately by each sail and the gap distance between the two sails is an important factor to determine total lift and thrust.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.4
• /
• pp.353-361
• /
• 2008

Recently a modern style sailing boat suitable for Korean sea was designed through full three dimensional design skill by the authors. In this paper, based on this three dimensional hull and deck design, a production process of 31ft class cruiser sailing boat was developed. First of all, it was possible to make the digital mock-up for design boat. Through this mock-up and RP(rapid prototyping) modeling, an appropriate general arrangement of design boat was able to be determined at final. And also the female deck mould was able to be made by a 5-axis NC cutting machine. By doing this method, more higher efficiency and precision for sailing boat production could be achieved than before. Through this research the total process of design and construction for the designed boat was established.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.426-434
• /
• 2014

The research developed twin keel yacht for everyone which is able to stand erectly on mud flat without list and intended to commercialize the development product for popularization of west coast's marine leisure industry. Yacht's linear was utilized by "Blue Water21" has superior performance among the existing sailing yachts and twin keel model has been tested by calculation of mono keel's extent and its center of gravity. The result was that only 4 % of difference have been identified between mono keel and twin keel's hydrodynamic resistance which was smaller difference than predicted.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.155-159
• /
• 2005

Analysis target ship is not introduced yet in domestic as steel yacht that is getting into the spotlight by leisure life in Australia or Japan. Sailing yacht or Yacht for leisure time made of FRP into controlling power fare mainly and the design and made of latest fishing boat and something of domestic is consisting mainly. To need investigated for concept is various kinds overall strength as that use mainly steel wire material structurally of steel yacht by small crafts about Longi strength, Transe strength portion even of design safety factor at subject to do Rule's allowable stress enough stable structure accomplish. But it is assessment of part intensity that become refer to most in small size ship.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.832-839
• /
• 2005

It is important to understandflow characteristics and performances of sailsfor both sailors and designers who want to have efficient thrust of yacht. In this paper the viscous flows around sail-like rigid wings, which are similar to main and jib sails of a 30 feet sloop, are calculated using a CFD tool. Lift, drag and thrust forces are estimatedfor various conditions of gap distance between the two sails and the center of effort of the sail system is obtained. Wind tunnel experiments are also carried out to measure aerodynamic forces acting on the sail system and to validate the computation. It is found that the combination of two sails produces the lift force larger than the sum of that produced separately by each sail and the gap distance between the two sails is an important factor to determine total lift and thrust.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.1
• /
• pp.128-138
• /
• 2013

The purpose of the research is to provide the basic information to broaden a population in marine sports and mark the beginning of the era of the marine sports with a yacht, water ski and a various of marine sports activities by researching the effect of sailing school participants' motive and satisfaction on continuous participation, preparing for the era of a 30,000~40,000 dollars per capita GDP in the near future. To achieve this purpose, through the research from December 2009 to April 2012, the following is concluded. First, in regard to psychological satisfaction and facility satisfaction, all subordinated factors of participating motive affect, health-oriented and social relations in the aspect of social satisfaction, and health-oriented, home entertainment and social relations in the aspect of self satisfaction. Second, sports capability affects health-oriented and pastime entertainment, sports habit and peer affect health-oriented, and sports environment affects home entertainment. Third, sports capability affects psychological satisfaction, sports habit affects psychological satisfaction and facility satisfaction, sports environment affects social satisfaction.