• Journal of the Korean GEO-environmental Society
• /
• v.11 no.12
• /
• pp.47-56
• /
• 2010

The construction of new roads and the consistent extension of already-existing roads or the line-shape revision of those roads are increased with the governmental investment to SOC facilities currently. Accordingly, the road cut slopes are in the trend of rapidly increasing. As the road slope has increased, a lot of human and property damages has entailed consequently and in the local case, numerous studies have carried out aiming at minimizing this damages caused by the rockfall and landslide. In general, standard falling rock prevention facility has employed for most of the local road slope based on "Guide for Installation and Management of Road Safety Facilities" published by MLTM(the Ministry of Land, Transport, and Maritime Affairs) but profound doubt has raised as to whether this rockfall prevention facility would function properly enough to prevent rockfall efficiently without any damages in case of actual occurrence of rockfall. In addition, it is a reality that in most cases, such work is relied on overseas technology as a whole as the local technical level is low and in case of rockfall prevention net, it is judged that a study on rockfall prevention net that is able to endure more powerful rockfall energy is required as the problem including net bursting is taken place as a result of enough bearing force being failed to be demonstrated due to its partial weak point(not uniformly made). Under this background, in this study, three kinds of model depending on mesh size of expanded metal that is considered to have an adoptability as rockfall prevention net, as target are selected and characteristics depending on mesh size of expanded metal is intended to be researched through a pull-out test performance by using pull-out test equipment rockfall prevention net.

• Journal of Life Science
• /
• v.16 no.1
• /
• pp.58-63
• /
• 2006

There was cross-sectional study on investigating the factors related asbestos-related disease on chest radiograph of workers exposed to asbestos in ship repair. According to Occupational Safety & Health Administration asbestos standard, medical surveillance, chest radiologic study, pulmonary function test and medical questionnaire are performed in 118 subjects exposed to asbestos for 10 years or more in ship repair. The sixteen out of 118 subjects $(13.6\%)$ were observed asbestos-related disease finding on chest radiography. Significant factors related to those finding on chest radiography were abnormal pulmonary function test, cough, sputum, past history of respiratory disease, work duration. Workers with Significant factors related asbestos-related disease finding on chest radiography should be managed on a strict program. Further, factors unrelated with asbestos-related disease finding on this study should be evaluated prospectively for medical surveillance program of workers exposed to asbestos.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.19-26
• /
• 2017

Concrete is a construction material with porous media and corroded steel inside affects negatively to durability and structural safety. This study aims a derivation of quantitative relationship between measured HCP (Half Cell Potential) and corrosion amount considering cover depth and W/C (water to cement) ratio. For the work, cement mortar specimens with 3 different W/C ratios and 4 different cover depths are prepared, HCPs are measured with 3 different corrosion level. HCP measurement significantly increases in the saturated condition and linear relationship is observed between corrosion level and acceleration period. With increasing corrosion level and W/C ratio, and decreasing cover depth, HCP measurement increases. Considering total corrosion level and HCP measurements, relatively low COV(Coefficient of Variation) of 0.67 is evaluated through multi-linear regression analysis, however higher COVs over 0.90 can be obtained considering level of HCP measurement. In the room condition, corrosion level can be evaluated through measured HCP in the given conditions of cover depth, W/C ratio. diameter of steel inside.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1070-1079
• /
• 2012

The impact energy absorbing is a very important characteristic of an aircraft to enhance the survivability of occupants when an aircraft is under the survivable accident such as an emergency landing condition. The impact energy is generally transmitted into the occupant and absorbed through a landing gear, a subfloor (lower structure of fuselage), and a seat. The characteristic of crash energy absorbing of a subfloor depends on the type of an aircraft, a shape of structure, and an applied material. Therefore, the study of crashworthiness characteristics of a subfloor structure is very important work to improve the safety of an aircraft. In this study, a finite element model of a narrow body fuselage section for the 80~90 seats regional aircraft was developed and crash simulation was executed using an explicit finite element analysis. Through survey of the impact energy distribution of each structural part of a fuselage and floor-level acceleration response, the crashworthiness characteristics and performance was evaluated.

• Smart Media Journal
• /
• v.6 no.1
• /
• pp.61-67
• /
• 2017

A large number of people living in modern times prefer remaining unmarried or living alone independently for the reason of their own will or another person's will. This is because they dislike being interfered with by other persons or because there is a financial problem. This behavior has become mainstream in persons working for professional jobs, persons having a strong disposition toward individual activity or college students. In particular, career women pursuing their own comfortable life have the tendency to prefer single life. However, sometimes, they become a target of crime that targets and makes bad use of this point. For these reasons. Consequently, sometimes, they additionally install and use a security system such as door security guard at front door and so on. It is not so difficult to lock the door security guard at the front door. However, it is apt to be forgotten. And when they are on the bedspread before falling asleep, in case they should check whether the door security guard is locked or in case they should lock it, they should get up, go to the entrance, and check and lock the door security guard. They often don't lock the door security guard due to their feeling that it is all right because of annoyance and inconvenience. This paper is intended to work for safety from crime such as illegal housebreaking by more conveniently using the door security guard after designing and implementing a system that can remotely control the door security guard, using a smartphone as a method of resolving this annoyance and keeping life more safe.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.292-300
• /
• 1996

Hexavalent chromium($Cr^{+6}$) compounds are considered to be particularly hazardous, primarily because of the associated risk of allergic reaction and cancer. The analytic method of hexavalent chromium such as the s-diphenylcarba-zide(DPC) method and all ether previously used methods are often made uncertain due to significant interferences from organic components. This report can provide a technique for the more rapid and simple determination of total hexavalent chromium. than other currently using methods. The s-diphenylcarbazide method proposed by the U.S. National Institute for Occupational Safety and Health has low recovery rate(15.67 - 48.20%) due to interference, iron chloride and nickel chloride. A microwave oven technique has high recovery rate(about 70%) of insoluble hexavalent chromium. For the difference of ionic charges of $Cr^{+3}$-ethylenediamine tetraacetic acid(EDTA) chelate and $CrO_4{^{-2}}$, we could detect them simultaneously by ion exchanged high performance liquid chromatography. The confirmation of $Cr^{+3}$ and $Cr^{+6}$ were checked by fraction collector and flameless atomic absorption spectrometer. We observed that the small amount of hexavalent chromium is converted to trivalent chromium due to enhancement of chromium reduction by $Fe^{+3}$ or $Ni^{+2}$. As a result of this study, on the analysis of insoluble hexavalent chromium with microwave oven was used for, it may be better and more precise analysis after pretreatment by 2% NaOH-3% $Na_2CO_3$ and then analysis UV-spectrophotometer. It should be done for various studies on insoluble hexavalent chromium on the basis work environmental monitoring so called welding, painting etc.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.1
• /
• pp.51-60
• /
• 2018

Objectives: Currently, there is only limited knowledge regarding the hazard of low-level exposure to CMR materials in workplaces. To overcome this limitation, a reference concentration for workers($RfC_w$) from among the risk assessment tools proposed by the US EPA is widely used to set a provisional workplace exposure level(PWEL) for CMR materials for which there are no established Korea Occupational Exposure Limits(KOELs) or subjective chemicals for work environment measurements as regulated by Korea Ministry of Employment and Labor(KMOEL). A simple European calculator of derived no effect level(SECO-DNEL) as proposed by REACH can also be used in place of $RfC_w$ to set the PWEL for chemicals. This study was performed to test the acceptability of using SECO-DNEL as an alternative to $RfC_w$ when setting a PWEL for low-level exposures. Methods: The $RfC_w$ and DNEL for the five CMR materials of dinitrogen oxide, catechol, 2-phenoxy ethanol, carbitol, and carbon black were calculated using the dose-response assessments of the US EPA for $RfC_w$ and REACH guidance for SECO-DNEL, respectively. They were compared using paired t-tests to determine the statistical differences between them. Results: For the five chemicals, the $RfC_w$ were 2.53 ppm, 0.10 ppm, 1.73 ppm, 1.66 ppm, and $0.05mg/m^3$, respectively, while the SECO-DNEL were 2.01 ppm, 0.11 ppm, 1.83 ppm, 1.77 ppm, $0.14mg/m^3$, respectively. There was no statistically significant difference between $RfC_w$ and SECO-DNEL. Conclusions: This study suggests that the SECO-DNEL could be applied in place of $RfC_w$ to set a PWEL for low-level exposure to chemicals, especially CMR materials. To further ensure the reliability of SECO-DNEL as an alternative tool, more chemicals should be applied for calculation and comparison with $RfC_w$.

• Journal of Society of Preventive Korean Medicine
• /
• v.16 no.3
• /
• pp.139-153
• /
• 2012

Objectives : NK cells are spontaneously cytotoxic lymphocytes. These are not only important parts in the first line of defence against bacterial and viral infections of outside, but they may also play a critical role in chronic viral diseases. NK cells kill their targets spontaneously, without the need for prior sensitization and class I MHC restriction by the regulation of cytolytic functions and secretion of a variety of cytokines, such as interleukin-12(IL-12), MCP-1, IL-6, TNF-${\alpha}$, IFN-${\gamma}$. In addition, macrophage and NK cells cooperate through the production of cell mediates. These cooperation and modulation are one of major factors to prevent for evading immune surveillance of cancer. Hence, it could be assumed that if any candidate to enhance activities of macrophage and NK cell, it is considered as a potentially useful agents against cancer. Methods : In our study, to investigate effect of fermented soybean extracts by Lactic acid bacteria (SFE, soybean fermented extracts) work on intestinal immune cell to maintain general immune modulating and anti-cancer activity. We analyzed NK cytotoxicity assay and gene expressions of cytokine related with macrophage and NK cell activity. Results : In vitro experiment, SFE was verified as safety material for cell toxicicty to tumor cell strain without any toxicity of tumor growth inhibition and various cell strain. Effects of macrophage activity stimulating directly by SFE measured induced cytokine. The studies showed that IL-12 production by stimulation of SFE depended on concentration from 0.16mg/mL to 0.63mg/mL with non toxicity to cell, and it was the best activity at 0.63mg/mL. Besides, the effective concentration of SFE producing TNF-${\alpha}$ is similar to IL-12, but it was the best activity at 1.25mg/mL. The level of MCP-1, IL-6 and IFN-${\gamma}$ depended on concentration from 0.16mg/mL to 10mg/mL, IFN-${\gamma}$ showed the best activity at the effective concentration of 0.63mg/mL. With the result of NK cell activity measurement, the spleen cell of mouse injected SFE had 1.5 times higher killing effect than non injected cell. Conclusions : The result of this studies is that Soybean fermetated extracts(SFE) has possibility to immune aided material for the function not only inhibition of microbial infection to macrophage but also activity of adaption immune and cellular immune system.

• Journal of Preventive Medicine and Public Health
• /
• v.34 no.4
• /
• pp.331-336
• /
• 2001

Objectives : To assess the prevalence of knee osteoarthritis through proper diagnosis in a rural community and to elucidate the relevant factors of this health problem in order to develop educational methods for the prevention of female knee osteoarthritis as well to provide basic data for prospective research. Methods : Over a period of three months starting from August, 2000, 432 women over the age of 40 and living in a rural area were selected by a multistage cluster sampling method in order to investigate the prevalence of knee osteoarthritis and the related factors. The study utilized interviews and radiological examination. The criteria of knee osteoarthritis used was the American College of Rheumatology classification criteria for osteoarthritis of the knee(1995). Results : The adjusted prevalence of knee osteoarthritis among the subjects was 55.0%, and multiple logistic regression analysis showed that the odds ratio(OR) of knee osteoarthritis among subjects 50-59 years of age and subjects older than 60 years of age as compared to subjects 40-49 years of age were 2.43(95% CI: 1.30-4.70) and 4.40(95% CI: 2.47-7.83), respectively. The OR of knee osteoarthritis among factory workers or farmers as compared to others was 1.79(95% CI: 1.03-3.12). The OR of knee osteoarthritis among subjects who had a family history and subjects who had knee injury or surgical history against those subjects had neither were 2.56(95% CI: 1.42-4.03) and 4.70(95% CI:1.45-15.19), respectively. The OR of knee osteoarthritis among smokers against non smokers was 0.47(95% CI: 0.22-0.97). Conclusions : Related factors of knee osteoarthritis included age, occupation, family history, smoking, knee injury and history of surgery In order to prevent knee osteoarthritis in high risked rural woman, education concerning self-care methods and safety guideline must be provided at the work place by the public and private health sectors. Additionally, these women should be continually encouraged to exercise, including jogging and swimming regularly.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.809-814
• /
• 2005

In this work, the thermal properties of epoxy coating system on the liner plate in the containment structure of nuclear power plants had been examined by irradiation and design basis accident (DBA) conditions. The effect of immersion in hot water on adhesion strength of the coating system had been also studied. The glass transition temperature ($T_g$) and thermal stability of ET-5290/carbon steel A 32 epoxy coating systems were measured by DSC and TGA analyses, respectively. Contact angle measurements were used to determine the effect of immersion on the surface energetics of epoxy coating system, with a viewpoint of surface free energy. Adhesion tests were also executed to evaluate the adhesion strength at interfaces between carbon steel plate and epoxy resins. As a result, it was found that the irradiation led to an improvement of internal crosslinked structure in cured epoxy systems, resulting in significantly increasing the thermal stability, as well as the $T_g$. Also, the immersion in hot water made a role in the post-curing of epoxy resins and increased the mechanical interlocking of the network system, resulting in increasing the adhesion strength of the epoxy coating system.