• Journal of the Korean Professional Engineers Association
• /
• v.18 no.3
• /
• pp.21-27
• /
• 1985

Earthen mass located beneth a sloping group surface, whether natural or manmade, have a tendency to move downward and outward under the influence of gravity. Unless this tendency is suitably counteracted by the Shearing resistances within the mass, a landslide occurs. Avoiding such instabilities is a major concern of the geotechnical engineer. The shearing behavior of a soil is determined empirically, i.e., by field tests or laboratory tests. This results are applied to the slope stability analysis. The factor of safety for slope stability analysis is much more sensitive to the choice of strength parameters as interpreted from soil tests than to the choice of the computational method of analysis. This paper was investigated the influence of the change in the factor of safety due to a change in one of the parameters, relative to the total change in the factor of safety due to change in all parameters. A conclusion may be reached with respect to the required precision definition of the different variables to limit uncertainties in the factor of safety to tolerable levels.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2126-2127
• /
• 2011

This paper describes the analysis of deterioration characteristics for connection factor according to connection method of grounding system. The connection method of grounding system is specified in IEC standard. In order to analyze the deterioration characteristics for connection factor, deterioration test was carried out when the connection factor was buried in salt water and underground. The test connection factors were C-type sleeve, clamp, and exothermic welding. As a consequence, most of the connection factor was corroded, and the electrical resistance decreased after deterioration. The analytical results can be used to establish the safety of grounding system.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.113-119
• /
• 2015

This study is to examine the workers' awareness of the safety in logistic centers. For that purpose, the exploratory factor analysis of workers' safety awareness in logistic centers was performed at first, and the 6 variables extracted from the factor analysis were then used to investigate the difference in intergroup awareness of the safety environment in the logistic centers. We administered a survey to 147 workers attending the logistic centers and collected data from them. The results of the study showed that the intergroup awareness of the safety environment turned out to be statistically different from each other in terms of working environment, safe behavior, work risk, safety knowledge and effort, risk justification and compromising attitudes. Experiences in industrial accidents influenced awareness of working environment, work risk and risk justification. The group who experienced accidents is more likely to feel risky and unsatisfied with working place, and their awareness toward risk justification was high as well. It was also observed that there exists awareness difference between manager group and worker group. The group who manages the working place showed more positive awareness of working environment, safe behavior, work risk, safety knowledge and effort, risk justification and compromising attitudes than the worker group. On the contrary, the worker group showed high recognition in risk of working place, and felt that they are willing to compromise on safety for increasing production. The scale of the logistic center produced negative influence on awareness of safety. The group in small logistic center showed the highest awareness in safety, whereas the group in large logistic center with more than 100 workers showed the highest awareness in risk. They are more likely to deviate from correct and safe work procedures due to over-familiarity with the job, as well. The findings suggest that there is a need for the safety management and education to change the workers' understanding and attitudes towards safety.

• Korean Journal of Community Nutrition
• /
• v.20 no.6
• /
• pp.399-410
• /
• 2015

Objectives: This study aims to identify self-resilience factors that drive right dietary and food safety practices in middle school students. Methods: Data was collected from 438 middle school students in Daegu using a self-administered questionnaire in December, 2013. The questionnaire consisted of 81 items with the following categories: general information, self-resilience, right dietary and food safety practices. Statistical analyses to determine frequency, average, ANOVA, factor analysis, reliability analysis, and regression analysis were performed using SPSS 21. Results: The results of factor analysis indicated that self-resilience was classified into challenge, adaptability, patience and achievement needs, and right dietary practices were sub-grouped into family meals, experience of dietary life, eco-friendly, balanced food, economy and bad food control, and food safety practices consisted of management of bacteria, hand washing and eating off a plate, safety food and food purchasing. The score of right dietary and food safety practices showed significant differences by sex, grade, and school achievement (p < 0.05). The economy factor of right dietary practices was significantly affected by the management of bacteria (p < 0.001), hand washing and eating off a plate (p < 0.001), safety food (p < 0.01), food purchasing of food safety practices (p < 0.05). The challenge factor of self-resilience significantly affected family meals, experience of dietary life, balanced food, economy, bad food control, management of bacteria, hand washing and eating off a plate, and safety food (p < 0.05). The adaptability factor of self-resilience was associated with factors such as eco-friendly, balanced food, economy, bad food control, management of bacteria, hand washing and eating off a plate, and food purchasing (p < 0.05). Conclusions: This study suggests that dietary education programs for middle school students could incorporate food safety practices, and self-resilience such as challenge, adaptability, patience and achievement needs to be effective.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.58-62
• /
• 2017

In this paper, we studied the structural design for safety improvement of the winch mount of the armored recovery vehicle. From the finite element analysis using the safety factor of the original winch mount, the results determined that the safety factor was very low, namely 1.14 at $-15^{\circ}$ when towing the maximum force. For considering the usage and safety, the safety factor needs to increase to between 1.4 and 1.6. To improve the safety factor, a re-design, such as shape modification and strengthening the welded zone, was performed. After the improvement of the structural design, the safety factor of the improved mount was calculated at 1.78, an increase of about 56.1% from that of the original mount.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.04a
• /
• pp.113-123
• /
• 2007

Through so that accident of semiconductor industry deduces unsafe factor of the person center on unsafe behaviour that incident history and questionnaire and I made starting point that extract very important factor. It served as a momentum that make up base that analyzes factors that happen based on factor that extract factor cause classification for the first factor, the second factor and the third factor and presents model of human error. Factor for whole defines factor component for human factor and to cause analysis 1 stage in human factor and step that wish to do access of problem and it do analysis cause of data of 1 step. Also, see significant difference that analyzes interrelation between leading persons about human mistake in semiconductor industry and connect interrelation of mistake by this. Continuously, dictionary road map to human error theoretical background to basis traditional accidental cause model and modern accident cause model and leading persons. I wish to present model and new model in semiconductor industry by backbone that leading persons of existing scholars who present model of existent human error deduce relation. Finally, I wish to deduce backbone of model of pre-suppression about accident leading person of the person center.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1931-1936
• /
• 2016

In this paper, we analyzed causes of accidents that recently increased in the illegal and defective LED lamps. They were analyzed by the electrical characteristics calculation and reappearance experiments. The causes of the accidents were analyzed from the circuit affected by the variation of voltage, current and power by harmonics. We drew a conclusion for electrical safety in illegal or degraded LED lamps from the analysis result. The management factors for electrical safety in LED lamps were harmonics, reactive power and power factor. It is possible to secure the electrical safety through monitoring of power factor in failure products and available in smart meters or smart distribution boards.

• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1715-1720
• /
• 2019

Jozef Stefan Institute (JSI), TRIGA Mark II reactor employs the homogeneous mixture of uranium and zirconium hydride fuel type. Since its upgrade, a series of fresh fuel steady state experimental benchmarks have been conducted. The benchmark results have provided data for testing computational neutronics codes which are important for reactor design and safety analysis. In this work, we investigated the JSI TRIGA Mark II reactor neutronics characteristics: the effective multiplication factor and two safety parameters, namely the control rod worth and the fuel temperature reactivity coefficient using SuperMC. The modeling and real-time cross section generation methods of SuperMC were evaluated in the investigation. The calculation analysis indicated the following: the effective multiplication factor was influenced by the different cross section data libraries; the control rod worth evaluation was better with Monte Carlo codes; the experimental fuel temperature reactivity coefficient was smaller than calculated results due to change in water temperature. All the results were in good agreement with the experimental values. Hence, SuperMC could be used for the designing and benchmarking of other TRIGA Mark II reactors.

• Journal of Korean Public Health Nursing
• /
• v.17 no.1
• /
• pp.113-121
• /
• 2003

Purpose : This study was performed to develop a scale of outdoor school safety behavior in Korean elementary students. Methods : A list of 40 items were selected by priori experiences of school health teachers and a literature review. For evaluation of the appropriateness of the 32 items, questionnaires were reviewed by an expert group which was consisted of 10 professionals. Validity of the 31 items was screened in this process with 4 point Likert scale. Using the preliminary tool. data were collected from 684 subjects for item analysis and factor analysis. A total of 26 items were remained, and items with the lower than 0.2 item-total correlation coefficient were removed. Factor analysis was done with these 26 items, and 26 items with factor loadings higher or equal to 0.4 were remained. Relsult : 1. Cronbach's alpha for the 26 items was 0.70 2. Five factors were identified with eigen value 1.0 These contributed $51.617\%$ of the variance in the total score. 3. Each factor was labled 'vonobserbance of safety rule', 'good habit for safety', 'careless action', 'lack of safety knowledge', 'injurious action to friend' It is suggested that this scale could be used to measure outdoor school safety behaviors among elementary students in Korea.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.107-114
• /
• 2009

Human walking is essential and important mean of transportation. Pedestrian safety is recently important because accidents often happen while walking. This research is showing that Walking-environmental factors have effect on safety while walking. At first, exact 15 factors and conduct survey in the preceding research. After that, exact 4 important factors through factor analysis. At result of Multiple regression analysis, null hypothesis has proved to be true by satisfying therms which is F-value 9.211 and P-value 0.000. and come to the conclusion that walking-environmental factors influence pedestrian safety. 4 important factors can be listed by below. Pedestrian-road characteristic, landscape characteristic, commercial characteristic, walking characteristics by following influence. Especially, landscape characteristic and pedestrian-road characteristic can be vital factors.