• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1590-1591
• /
• 2011

In this paper, the UV corona camera was developed using the solar blind and Multi Channel Plate(MCP) technology for the target localization of UV camera. UV camera developed a $6.4^{\circ}{\times}4.8^{\circ}$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. The UV camera was developed and measured using a UV image, as applied voltage increased ultraviolet images of the phenomenon could be obtained. And we investigated properties of UV corona image on insulator in salt water environments. From the results, the breakdown voltage was decreased and UV images were taken at low voltages and the UV image is rapidly increased with increasing High voltage.

• 자동차안전학회지
• /
• 제12권4호
• /
• pp.7-12
• /
• 2020

Recently, automobile industries have developed ADAS, smart cars, connected cars, automated driving systems, which use a variety of sensor systems - ultrasonics, cameras, lidars and radars - and communication systems. It is necessary to examine the electromagnetic immunity of vehicles equipped with the sensor systems due to the fact that the normal operation of those systems is very important to the safety of the vehicles. The electromagnetic immunity tests are carried out in an electromagnetic semi anechoic chamber, which is cut off from the outside. It is difficult to create test environments in which the camera sensor systems of vehicles work properly in the test chamber. In this study, test jigs were designed and tested and as a result they are shown to be effective to create test environments for electromagnetic immunity tests of vehicles equipped with camera sensors. We also proposed additional safety standards for immunity tests of vehicles with camera systems that currently do not exist.

• 조명전기설비학회논문지
• /
• 제26권12호
• /
• pp.37-43
• /
• 2012

UV-IR diagnostic technology is being used for predictive maintenance of high voltage equipment together with IR-thermography and ultrasonic devices. In this paper, the UV-IR camera design, fabrication, and perform a simple test to be take advantage of the diagnostic equipment. UV-IR camera developed a $6.4^{\circ}{\times}4.8^{\circ}$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. In a distance of 5m with the UV-IR it is possible to detect partial discharge with a PD level of 2.5 pC and a RIV(Radio Influence Voltage) level of $3.6dB{\mu}V$.

• 자동차안전학회지
• /
• 제12권3호
• /
• pp.43-51
• /
• 2020

Currently, the second level of the six stages of self-driving technology, as defined by SAE, is commercialized, and the third level is preparing for commercialization. The purpose of ACC is to be evaluated as a system useful for preventing and preventing accidents by minimizing driver fatigue through longitudinal speed control and relative distance control of the vehicle. In this regard, for the study of safety assessment methods in the practical environment of ACC. Distance measurement method using monocular camera and data acquisition equipment such as DGPS are utilized. Based on the evaluation scenario considering the domestic road environment proposed by the preceding study, the relative distance obtained from equipment such as DPGS and the relative distance using a monocular camera in the actual test is verified by comparing and analyzing the safety assessment. The comparison by scenario results showed a minimum error rate of 3.83% in Scenario 1 and a maximum of 14.61% in Scenario 6. The cause of the maximum error is that the lane recognition is not accurate in the camera image and irregular operation conditions such as rushing in or exiting the surrounding area from the walkway. It is expected that safety evaluation using a monocular camera will be possible for other ADAS systems in the future.

• 한국도로학회논문집
• /
• 제7권4호
• /
• pp.185-202
• /
• 2005

본 연구에서는 현장 실험 조성의 제약을 극복하기 위해 3차원 가상현실(virtual reality)로 설계중인 도로를 모델링한 후, 피실험자가 Eye camera가 장착된 차량 시뮬레이터 (driving simulator)에 탑승하고 주행하면서 운전자가 행하는 선형변화에 대한 동적 반응 및 운전자의 시각행태에 대한 데이터를 획득하였다 본 실험에 적용된 차량시뮬레이터의 그래픽 모듈은 동역학 해석 모듈에 의해 얻어진 데이터를 기초로 하여 운동재현기와 가상환경의 일치감들 최대로 함으로써 피실험자로 하여금 차량시뮬레이터의 비현실성 및 부작용을 최소화하도록 하였다. 또한, Eye camera는 기존의 여타 장비와는 달리 운전자가 헬멧이나 렌즈 등 어떠한 부착장치도 착용하지 않고 실험할 수 있는 FaceLAB을 사용함으로써 운전자의 자연스러운 시각행태를 아무런 데이터 손실없이 획득하였다. 본 연구에서는 조사된 데이터를 바탕으로 도로 안전성을 평가하기 위해 차량 시뮬레이터, Eye camera방법을 통해 설계시 도로 기하구조 변화에 따라 운전자가 느끼는 안전성의 변화를 파악함으로써 도로 기하구조 조건과 안전성의 상관성을 명확하게 규명하고 이를 통해 운전자가 도로 주행시 편안하고 쾌적한 주행을 보장받을 수 있는 도로를 설계 단계에서부터 평가할 수 있는 방법을 제시하려고 한다.

• 자동차안전학회지
• /
• 제12권3호
• /
• pp.34-42
• /
• 2020

ADAS (Advanced Driver Assistance Systems) uses sensors such as camera, radar, lidar and GPS (Global Positioning System). Among these sensors, the camera has many advantages compared with other sensors. The reason is that it is cheap, easy to use and can identify objects. In this paper, therefore, a theoretical formula was proposed to obtain the distance from the vehicle's front wheel to the lane using a monocular camera. And the validity of the theoretical formula was verified through the actual vehicle test. The results of the actual vehicle test in scenario 4 resulted in a maximum error of 0.21 m. The reason is that it is difficult to detect the lane in the curved road, and it is judged that errors occurred due to the occurrence of significant yaw rates. The maximum error occurred in curve road condition, but the error decreased after lane return. Therefore, the proposed theoretical formula makes it possible to assess the safety of the LKA system.

• 조명전기설비학회논문지
• /
• 제27권4호
• /
• pp.54-61
• /
• 2013

UV-IR camera is being used for predictive maintenance of high voltage equipment together with measurement of temperature on localized heat and corona discharge. This paper was suggested the judgement method that is the discharge count, UV image pattern and discharge matching rate to apply the UV-IR camera on power facility. The discharge count method is counted by UV image pixel value. the UV image pattern method is determined by the UV image shape using neural network algorithm method, separated by Sunflower, Jellyfish, Ameba. The UV discharge matching is compare the breakdown the UV image size and measuring UV image size according to distance.

• 한국정보통신학회논문지
• /
• 제23권9호
• /
• pp.1088-1095
• /
• 2019

최근 발전되고 있는 정보통신 IT 기술은 자동차 시장에도 큰 영향을 미치며 발전하고 있다. 근래에는 운전자의 안전성과 편의성을 위해 IT 기술이 접목된 장치들이 장착되고 있다. 하지만 편의성이 증가된 장점과 함께 운전자의 주의 분산으로 인해 교통사고를 증가시키는 단점도 가져오게 되었다. 이러한 사고를 미연에 방지하기 위해 여러 방식과 종류의 안전시스템 개발이 필요하다. 본 논문에서는 두 개 이상의 센서를 이용한 레이더센서 와 카메라 융합 방식 및 Stereo Camera 방식을 이용하지 않고 하나의 단일 Camera를 이용하여 주/야간 차선이탈 경보 및 장애물 및 보행자 인식이 가능한 플랫폼을 구현 하고 차량에서 인식률 평가 및 유효성을 분석 하여 단일 카메라를 이용한 다기능 주행안전 플랫폼 연구를 제안 한다.

• 한국안전학회지
• /
• 제32권6호
• /
• pp.98-103
• /
• 2017

In Korea, the guideline for the bridge safety inspection requests to assess surface degradation, including crack, efflorescence, spalling, and so on, for the rating of concrete bridges. Currently, the assessment of efflorescence is performed based on the visual inspection of expertized engineers, which may result in subjective inspection result. In this study, a novel method using a hyperspectral camera is proposed for objective and accurate assessment of concrete efflorescence. The hyperspectral camera acquires the light intensity for a number of continuous spectral bands of light for each pixel in an image, which makes the hyperspectral imaging technique provides more detailed information than a color camera that collects intensity for only three bands corresponding to RGB (red, green, and blue) colors. A stepwise assessment algorithm is proposed based on the spectral features to decompose efflorescence area from the inspected concrete area. The algorithm is tested in the laboratory test using two concrete specimens, one of which is dark colored with efflorescence on a surface while the other is bright concrete without efflorescence. The test shows high accuracy and applicability of the proposed efflorescence assessment using a hyperspectral camera.

• 한국자동차공학회논문집
• /
• 제25권2호
• /
• pp.219-226
• /
• 2017

This paper addresses the effective and quantitative image DB construction for the development of front looking camera systems. The automotive industry has expanded the capability of front camera solutions that will help ADAS(Advanced Driver Assistance System) applications targeting Euro NCAP function requirements. These safety functions include AEB(Autonomous Emergency Braking), TSR(Traffic Signal Recognition), LDW(Lane Departure Warning) and FCW(Forward Collision Warning). In order to guarantee real road safety performance, the driving image DB logged under various real road conditions should be used to train core object classifiers and verify the function performance of the camera system. However, the driving image DB would entail an invalid and time consuming task without proper guidelines. The standard working procedures and design factors required for each step to build an effective image DB for reliable automotive front looking camera systems are proposed.