• Journal of the Korean Institute of Gas
• /
• v.24 no.1
• /
• pp.76-81
• /
• 2020

Recently, fire and explosion accidents caused by sparks scattered during welding and melting work in the work place where flammables are present. The causes of such fire accidents are mostly non-compliance with basic safety rules such as the removal of hazardous goods and the prevention of sparks scattering. It is strongly recommended to revise Industrial Safety and Health Act. This study analyzes the fire and explosion accidents in the work of firearms, such as welding and melting work, and analyzes the causes from a system perspective, and proposes an improvement plan for the system such as expanding the number of fire monitors, pre-approval of fire risk work, and intensifying fire prevention safety education.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.1
• /
• pp.11-16
• /
• 2006

There are many counting rules for analyzing man-made mineral fibers. The representatives are the NIOSH Method 7400 A and B counting rules. The two rules have different rules of length-to-width ratio(aspect ratio) and diameter. The A rule counts only fibers $>5{\mu}m$ in length, and only fibers with aspect ratio >3:1. The B rule counts only ends of fibers $>5{\mu}m$ in length and $<3{\mu}m$ in diameter, and only fibers with aspect ratio ${\geq}5:1$. The A counting rule had been used before the B counting rule was introduced. The purpose of this study is to compare the A and B counting rules for airborne fibers from various man-made mineral fibers(glass wool fibers, rock wool fibers, refractory ceramic fibers, and continuous filament glass fibers) industries. There were significantly differences between the paired counts of A and B rules in all types of fibers(p<0.05). A rule counts/B rule counts(A/B ratios) were 1.52 for glass fibers, 1.53 for rock wool fibers, 1.19 for RCF, and 1.82 for continuous filament glass fibers. The counting results by A and B counting rules were highly correlated in glass wool fibers, rock wool fibers and refractory ceramic fibers(RCF) samples (r=0.96 for all types of fibers) except continuous filament glass fibers(r=0.82). Regression equations to correct for the differences between counting rules were presented in this paper.

• Korean Journal of Health Education and Promotion
• /
• v.10 no.1
• /
• pp.61-71
• /
• 1993

Pedestrian injury have been the most important cause of death in children 1 to 14 years of age. This study was attempted to analyze the status and factors of the pedestrian safety education for primary school children. The purpose of this study was to provide the baseline study on pedestrian safety education. The data were collected from 313 respondents of 5th grade elementary school children in Seoul during April 26 through May 6, 1993. The data were cross tabulated for percent distribution and analyzed by multiple regression using SAS for personal computer program package. Major findings are as follows: (1) 50% of the respondents had never received any safety education for Pedestrian. The primary provider of pedestrian safety education was parent. (2) Respondents' knowledge on traffic rules, traffic signals, natures of motor vehicle is high(above 88%). (3) Respondents are very negative to the attitude of playing on the street and transversing under d1e overpass(about 80%). (4) 58% of respondents had never played on the street and 49% of respondents had never run on the street. (5) Factors affecting the knowledge of traffic safety was respondents' sex and job of their mothers(p＜0.05). (6) Factors affecting the attitude of traffic safety was economic status(p＜0.01). (7) Factors affecting the practice of traffic safety was education of respondents' fathers. (8) The multiple regression analysis showed that sex was statistically significant in affecting traffic accident of pedestrians (p=0.05). In order to prevent children's traffic accidents, education for pedestrians' safety by both parents and teachers should be strengthened.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.2
• /
• pp.134-139
• /
• 2012

Objectives: This study was conducted to study the analytical variability of A & B counting rules in counting using a phase contrast microscope airborne fibers collected on filters in man-made mineral or vitreous fibers (MMMFs) industries. Methods: Fibers in filters were counted using A & B rules of NIOSH Method 7400. Intra-counter and inter-counter variations by fiber type and density were obtained. The types of MMMFs analyzed were glass wool fiber, rock wool fiber, slag wool fiber, and refractory ceramic fibers. The densities of fibers classified were <20 $fibers/mm^2,$ 20 - <50 $fibers/mm^2$, 50 - <100 $fibers/mm^2,$ and ${\geq}100$ $fibers/mm^2,$ respectively. Results: Intra-counter relative standard deviations by rule A were 0.084, 0.102, 0.071 for glass wool fibers, rock wool fibers and refractory ceramic fibers, and those by rule B were 0.139, 0.120 and 0.142, respectively. Inter-counter relative standard deviations by rule A were 0.281, 0.296, 0.180 for glass wool fibers, rock wool fibers and refractory ceramic fibers, and those by rule B were 0.396, 0.337 and 0.238, respectively. Conclusions: Intra-counter variation was not different significantly among fiber types (p>0.05), but B rule variation for ceramic fibers approximately 2 times greater than corresponding A rule estimates, and intra-counter and inter-counter variations were higher in the low fiber density.

• Safety and Health at Work
• /
• v.9 no.1
• /
• pp.53-58
• /
• 2018

Background: Since the Republic of Korea became a labor-force-importing country, the number of foreign workers has increased gradually, especially in the construction industry. The main objective of this study was to examine the differences in safety perception between domestic and foreign workers at Korean construction sites. Methods: A total of 891 Korean and foreign workers were surveyed: 140 foreign and 751 Korean workers. The general characteristics and 25 factors influencing safety perception were considered in the questionnaire. Regression and correlation analyses were conducted to examine the variables of workers' safety perception. Results: Differences of nationality (F = 7.379, p < 0.001) and workplace accidents were statistically significant for both domestic (F = 1.503, p < 0.05) and foreign workers (F = 7.868, p < 0.05). In contrast, age, education, and Korean language level were significant variables only for foreign workers. Correlation coefficients of $0.428^{**}$ for Korean and 0.148 for foreign workers between two items - namely, "management's commitment to safety" and "blaming staff when they make mistakes" - support the conclusion that foreign workers do not trust management's commitment to safety, while Korean workers have confidence in these commitments. Conclusion: Foreign workers' level of safety perception should rise to the same level as Korean workers, especially in terms of obeying safety rules, safety education performance, and safety beliefs. Therefore, an improvement plan for the Korean construction industry is suggested in order to have a better safety level at construction sites with foreign workers.

• The Journal of Korean Society for School & Community Health Education
• /
• v.14 no.1
• /
• pp.61-70
• /
• 2013

Objectives: The purpose of this study analyzes the characteristics of safety education in schools, experience of accidents, and safety awareness level of elementary school students. It also presents realistic guidelines for safety education, which can effectively lead to the safety behavior of students. Methods: We carried out questionnaire survey by convenient sampling method to 6th grade students of 3 elementary schools in Gyeonggi-do area that can understand the questionnaire and express their own opinion for safety awareness from February 15, 2013 to February 1, 2013. We used a self-administered questionnaire and analyzed 266 questionnaires except dishonestly answered 34 questionnaires. Results: 1. For accident occurrence by gender, male students was higher than female students. Male students was also higher than female students among students having an accident(${\chi}^2$=5.142, p=0.029). There was statistical significance in accident occurrence by how they go to school. Students going to school on foot have higher accident rate(${\chi}^2$=11.447, p=0.010). 2. In terms of safety awareness level, students having no accident was higher than students having an accident(F=3.828, p=0.005) and students usually keeping safety rules have higher safety awareness(F=14.285, p=0.000). 3. When parents give safety education to their children as often as possible, the safety awareness level of students was high(F=5.257, p=.006). 4. Students having an accident have no safety education experience than students having no accident(p<0.05). They have never had safety education from a health teacher. There was statistical significance(p<0.01). Conclusions: Accordingly, we need to make students have safety attitude to prevent safety accidents. To achieve it, safety awareness has to be inspired. Systematic and various education programs that can give connected education with local community network to the students and parents is required.

• Journal of radiological science and technology
• /
• v.45 no.2
• /
• pp.127-134
• /
• 2022

In order to overcome the image quality limitations of the conventional C-arm, a flat panel detector (FPD) is used to enhance spatial resolution, detective quantum efficiency, frame rate, and dynamic range. Three-dimensional (3D) visualized information can be obtained from C-arm computed tomography (CT) equipped with an FPD, which can reduce patient discomfort and provide various medical information to health care providers by conducting procedures in the interventional procedure room without moving the patient to the CT scan room. Unlike a conventional C-arm device, a C-arm CT requires different basic safety and essential performance evaluation criteria; therefore, in this study, basic safety and essential performance evaluation criteria to protect patients, medical staff, and radiologists were derived based on International Electrotechnical Commission (IEC) standards, the Ministry of Food and Drug Safety (MFDS) standards in Korea, and the rules on the installation and operation of special medical equipment in Korea. As a result of the study, six basic safety evaluation criteria related to electrical and mechanical radiation safety (leakage current, collision protection, emergency stopping device, overheating, recovery management, and ingress of water or particulate matter into medical electrical (ME) equipment and ME systems: footswitches) and 14 essential performance evaluation criteria (accuracy of tube voltage, accuracy of tube current, accuracy of loading time, accuracy of current time product, reproducibility of radiation output, linearity and consistency in radiography, half layer value in X-ray equipment, focal size and collimator, relationship between X-ray field and image reception area, consistency of light irradiation versus X-ray irradiation, performance of the mechanical device, focal spot to skin distance accuracy, image quality evaluation, and technical characteristic of cone-beam computed tomography) were selected for a total of 20 criteria.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.4
• /
• pp.384-392
• /
• 2013

Objective: This study inspected incident cases, legal control levels, and GHS(Globally Harmonized System of Classification and Labeling of Chemicals) classification results of strong acids such as hydrogen fluoride, hydrogen chloride, nitric acid, and sulfuric acid, which have been responsible for many recent chemical accidents. As a result, it is deemed necessary for legal control levels of these strong acids to be revised and GHS classification be managed nation-wide. Methods: This study inspected incident cases and legal control levels for strong acids such as hydrogen fluoride, hydrogen chloride, nitric acid, and sulfuric acid. The study analyzed and compared chemical information status and GHS classification results. Results: There were 76 domestic incidents involving strongly acidic hazardous materials over the five years between 2007 and 2011. They include 37 leakage incidents(46.7%) within a workplace, 30 leakage incidents(39.5%) during transportation, and nine leakage incidents(13.8%) following an explosion. The strongly acidic materials in question are defined and controlled as toxic chemicals according to the classes of Substances Requiring Preparation for Accidents, Managed Hazardous Substance, Hazardous Chemical(corrosive) as set forth under the Enforcement Decree of the Toxic Chemicals Control Act and Rules on Occupational Safety and Health Standards of Occupational Safety and Health Act. Among them, nitric acid is solely controlled as a class 6 hazardous material, oxidizing liquid, under the Hazardous Chemicals Control Act. The classification results of the EU ECHA(European Chemicals Agency) CLP(Commission Regulation(EC) No. 790/2009 of 10 August 2009, for the purposes of its adaptation to technical and scientific progress, Regulation(EC) No 1272/2008 of the European Parliament and of the Council on classification, labeling and packaging of substances and mixtures) and NIER (National Institute of Environmental Research) are almost identical for the three chemicals, with the exception of sulfuric acid. Much of the classification information of NITE (National Institute of Technology and Evaluation) and KOSHA(Korea Occupational Safety and Health Agency, KOSHA) is the same. NIER provides 12(41.4%) out of 29 classifications, as does KOSHA.

• Journal of the Korean Society of Safety
• /
• v.31 no.2
• /
• pp.104-111
• /
• 2016

Our nation has experienced remarkable growth over the half a century. Nonetheless, there is still much room for improvement in the area of Environment, Health and Safety (EHS). In particular, frequency and severity of industrial accidents did not considerably improve compared to the economic and social progress we made. The main objective of this research is to analyze what plans and actions are required for companies to promote industrial safety by 1) fostering functional competencies of EHS staffs and 2) effectively and proactively responding to rapidly changing EHS environment. For this research, EHS staffs from five large companies in Korea were surveyed. Most respondents indicated that one of key expertise required by EHS staffs is capabilities to effectively deal with changes to various domestic and international EHS-related laws and regulations. Furthermore, a predominant number of respondents commented that it is imperative for EHS staffs to have a broad knowledge of business management. As for internal issues that EHS staffs encounter within their organizations, many pointed out that their EHS vision is not sufficiently shared throughout the organization, and that the rules of leadership are critical in solving this issue. On the other hand, the survey respondents also raised an issue of limited EHS-related investments due to slow economy. As a solution, they proposed ways to align EHS organization's performance with the company's performance. Based on this survey, issues and solutions for EHS organizations were identified. Results of this research can benefit companies that plan to newly establish or further expand EHS organization.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.2
• /
• pp.37-46
• /
• 2016

Due to increased demand for remodeling and repair in construction market in recent year, the usage of horse scaffold is increasing in the indoor finish works. Injuries related horse scaffold are mainly caused by poor installation or of careless handling of scaffold. Approximately 300 workers are injuried at construction site every year, it is accounting for about 1.5% of the total construction sector and has increased on a year-to-year trends. But the main contents between national standards and speccifications related to the manufacture and usage of horse scaffolds are mutually inconsistent, In particular, the rules on occupational safety and health standards are the basis for the prevention of industrial injuries, there is no explicit application being made to the horse scaffold commonly used on construction sites. The purpose of this study was to analye the manufacture and usage situations in order to reduce construction injuries that occur at the horse scaffolds. It will be utilized the results of the analysis as the basis data for unifying the major domestic standards and specifications associated with the manufacture and usage of horse scaffold.