• Analytical Science and Technology
• /
• v.35 no.3
• /
• pp.136-142
• /
• 2022

According to media reports, the carcasses of euthanized abandoned dogs were processed at high temperature and pressure to make powder, and then used as feed materials (meat and bone meal), raising the possibility of residuals in the feed of the anesthetic ketamine and dexmedetomidine used for euthanasia. Therefore, a simultaneous analysis method using QuEChERS combined with high-performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry was developed for rapid residue analysis. The method developed in this study exhibited linearity of 0.999 and higher. Selectivity was evaluated by analyzing blank and spiked samples at the limit of quantification. The MRM chromatograms of blank samples were compared with those of spiked samples with the analyte, and there were no interferences at the respective retention times of ketamine and dexmedetomidine. The detection and quantitation limits of the instrument were 0.6 ㎍/L and 2 ㎍/L, respectively. The limit of quantitation for the method was 10 ㎍/kg. The results of the recovery test on meat and bone meal, meat meal, and pet food showed ketamine in the range of 80.48-98.63 % with less than 5.00 % RSD, and dexmedetomidine in the range of 72.75-93.00 % with less than 4.83 % RSD. As a result of collecting and analyzing six feeds, such as meat and bone meal, prepared at the time the raw material was distributed, 10.8 ㎍/kg of ketamine was detected in one sample of meat and bone meal, while dexmedetomidine was found to have a concentration below the limit of quantitation. It was confirmed that the detected sample was distributed before the safety issue was known, and thereafter, all the meat and bone meal made with the carcasses of euthanized abandoned dogs was recalled and completely discarded. To ensure the safety of the meat and bone meal, 32 samples of the meat and bone meal as well as compound feed were collected, and additional residue investigations were conducted for ketamine and dexmedetomidine. As a result of the analysis, no component was detected. However, through this investigation, it was confirmed that some animal drugs, such as anesthetics, can remain without decomposition even at high temperature and pressure; therefore, there is a need for further investigation of other potentially hazardous substances not controlled in the feed.

• Journal of Life Science
• /
• v.32 no.4
• /
• pp.325-330
• /
• 2022

While swimming is a very popular competitive sports activity, swimming injuries are unique due to the repetitive nature of the swimming stroke and demanding training programs that can result in upper limb overuse. Therefore, the primary objective of this review was to analyze swimmers' injury areas, injury types by stroke type, and swimming rehabilitation, as well as to discuss safety management for improving swimming performance. In this study, the injuries incurred in swimming events were discussed in the order of upper limb injuries (neck, shoulder, arm, and wrist), lower limb injuries (knee and ankle), and waist injuries. An analysis by stroke type found that shoulder injuries occurred most often with freestyle, backstroke, and butterfly strokes, followed by rotator cuff injury, impingement syndrome, and SLAP (superior labral tear from anterior to posterior) lesions. Knee injuries were associated with the breaststroke, whereas spinal cord injuries occurred with the breaststroke and butterfly stroke. Finally, back injuries were associated with the butterfly stroke. During the freestyle stroke, the shoulder undergoes repetitive overhead movement; hence, shoulder and musculoskeletal pain are the most common and well-documented complaints of swimmers. For safety management, coaches and instructors must ensure that athletes do sufficient warm-up and cool-down exercises to avoid injuries. In case of an injury, they should be familiar with first aid measures so that secondary damage can be prevented with its quick application. In addition, coaches and instructors need to be trained in injury prevention and treatment so that they can provide appropriate rehabilitation treatment for athletes. Although swimming-related injuries cannot be completely eliminated, to reduce them to a minimum, leaders need the knowledge to apply scientific and systematic training principles and methods individualized for each athlete.

• Journal of Food Hygiene and Safety
• /
• v.37 no.3
• /
• pp.143-148
• /
• 2022

This study was to investigate an analytical method for determining dieckol content in Ecklonia stolonifera extract. According to the guidelines of International Conference on Harmonization. Method validation was performed by measuring the specificity, linearity, precision, accuracy, limit of detection (LOD), and limit of quantification (LOQ) of dieckol using high-performance liquid chromatography-photodiode array. The results showed that the correlation coefficient of calibration curve (R²) for dieckol was 0.9997. The LOD and LOQ for dieckol were 0.18 and 0.56 ㎍/mL, respectively. The intra- and inter-day precision values of dieckol were approximately 1.58-4.39% and 1.37-4.64%, respectively. Moreover, intra- and inter-day accuracies of dieckol were approximately 96.91-102.33% and 98.41-105.71%, respectively. Thus, we successfully validated the analytical method for estimating dieckol content in E. stolonifera extract.

• Journal of Food Hygiene and Safety
• /
• v.37 no.4
• /
• pp.216-224
• /
• 2022

This study was aimed at validating the analysis methods for deacetylasperulosidic acid (DAA), total sugar, galacturonic acid, glucose, and galactose, which are the indicator components of fermented Morinda citrifolia polysaccharide extract (Vitalbos). We modified the previously reported methods for validating the analytical methods. The specificity, linearity, precision, accuracy, limit of detection (LOD), and limit of quantification (LOQ) were measured using phenol-sulfuric acid method and high-performance liquid chromatography (HPLC). The retention time and spectrum of the standard solution of Vitalbos coincided, confirming the specificity. The calibration curve correlation coefficient (R²), of five indicator components, ranged from 0.9995-0.9998, indicating excellent linearity of 0.99 or more. The intra-day and inter-day precision range of the assay was 0.14-3.01%, indicating a precision of less than 5%. The recovery rate was in the range of 95.13-105.59%, presenting excellent accuracy. The LOD ranged from 0.39 to 0.84 ㎍/mL and the LOQ ranged from 1.18 to 2.55 ㎍/mL. Therefore, the analytical method was validated for DAA, total sugar, galacturonic acid, glucose, and galactose, in Vitalbos. The indicator component content in Vitalbos was determined using a validated method. The contents of DAA, total sugar, galacturonic acid, glucose, and galactose were 2.31±0.06, 475.92±5.95, 72.83±1.05, 71.63±2.44, and 67.30±2.31 mg/g of dry weight, respectively. These results suggest that the developed analytical method is efficient and could contribute to the quality control of Vitalbos, as a healthy functional food material.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1209-1215
• /
• 2022

The selective catalytic reduction (SCR) is known as a very efficient method to reduce nitrogen oxides (NOx) and the catalyst performs reduction from nitrogen oxides (NOx) to nitrogen (N₂) and water vapor (H2O). The catalyst, which is one of the factors determining the performance of the nitrogen oxide (NOx) ruduction method, is known to increase catalyst efficiency as cell density increases. In this study, the reduction characteristics of nitrogen oxides (NOx) under various engine loads investigated. A 100CPSI(60Cell) catalysts was studied through a laboratory-sized simulating device that can simulate the exhaust gas conditions from the power generation engine installed in the training ship SEGERO. The effect of 100CPSI(60Cell) cell density was compared with that of 25.8CPSI(30Cell) cell density that already had NOx reduction data from the SCR manufacturing. The experimental catalysts were honeycomb type and its compositions and materials of V₂O₅-WO₃-TiO₂ were retained, with only change on cell density. As a result, the NOx concentration reduction rate from 100CPSI(60Cell) catalyst was 88.5%, and IMO specific NOx emission was 0.99g/kwh satisfying the IMO Tier III NOx emission requirement. The NOx concentration reduction rate from 25.8CPSI(30Cell) was 78%, and IMO specific NOx emission was 2.00g/kwh. Comparing the NOx concentration reduction rate and emission of 100CPSI(60Cell) and 25.8CPSI(30Cell) catalysts, notably, the NOx concentration reduction rate of 100CPSI(60Cell) catalyst was 10.5% higher and its IMO specific NOx emission was about twice less than that of the 25.8CPSI(30Cell) catalysts. Therefore, an efficient NOx reduction effect can be expected by increasing the cell density of catalysts. In other words, effects to production cost reduction, efficient arrangement of engine room and cargo space can be estimated from the reduced catalyst volume.

• The Journal of KAIRB
• /
• v.2 no.2
• /
• pp.37-48
• /
• 2020

Purpose: The purpose of this study is to assess the operational status and level of understanding among IRB and HRPP staffs at a hospital or a research institute to the HRPP guideline set by the Ministry of Food and Drug Safety (MFDS) and to provide recommendations. Methods: Online survey was distributed among members of Korean Association of IRB (KAIRB) through each IRB office. The result was separated according to topic and descriptive statistics was used for analysis. Result: Survey notification was sent out to 176 institutions and 65 (37.1%) institutions answered the survey by online. Of 65 institutions that answered the survey; 83.1% was hospital, 12.3% was university, 3.1% was medical college, 1.5% was research institution. 23 institutions (25.4%) established independent HRPP offices and 39 institutions (60.0%) did not. 12 institutions (18.5%) had separate IRB and HRPP heads, 21 (32.3%) institutions separated business reporting procedure and person in charge, 12 institutions separated the responsibility of IRB and HRPP among staff, and 45 institutions (69.2%) had audit & non-compliance managers. When asked about the most important basic task for HRPP, 23% answered self-audit. And according to 43.52%, self-audit was also the most by both institutions that operated HRPP and institutions that did not. When basic task performance status was analyzed, on average, the institutions that operated HRPP was 14% higher than institutions that only operated IRB. 9 (13.8%) institutions were evaluated and obtained HRPP accreditation from MFDS and the most common reason for obtaining the accreditation was to be selected as Institution for the education of persons conducting clinical trial (6 institutions). The most common reason for not obtaining HRPP accreditation was because of insufficient staff and limited capacity of the institution (28%). Institutions with and without a plan to be HRPP accredited by MFDS were 20 (37.7%) each. 34 institutions (52.3%) answered HRPP evaluation method and accreditation by MFDS was appropriate while 31 institutions (47.7%) answered otherwise. 36 institutions answered that HRPP evaluation and accreditation by MFDS was credible while 29 institutions (44.5%) answered that HRPP evaluation method and accreditation by MFDS was not credible. Conclusion: 1. MFDS's HRPP accreditation program can facilitate the main objective of HRPP and MFDS's HRPP accreditation program should be encouraged to non-tertiary hospitals by taking small staff size into consideration and issuing accreditation by segregating accreditation. 2. While issuing Institution for the education of persons conducting clinical trial status as a benefit of MFDS's HRPP accreditation program, it can also hinder access to MFDS's HRPP accreditation program. It should also be considered that the non-contact culture during COVID-19 pandemic eliminated time and space limitation for education. 3. For clinical research conducted internally by an institution, internal audit is the most effective and sole method of protecting safety and right of the test subjects and integrity for research in Korea. For this reason, regardless of the size of the institution, an internal audit should be enforced. 4. It is necessary for KAIRB and MFDSto improve HRPP awareness by advocating and educating the concept and necessity of HRPP in clinical research. 5. A new HRPP accreditation system should be setup for all clinical research with human subjects, including Investigational New Drug (IND) application in near future.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.2
• /
• pp.484-497
• /
• 2024

Neonicotinoid pesticides, widely used worldwide as potent insecticides, have been found to have detrimental effects on the environment and living organisms due to their persistent residues. This study aimed to investigate the neonicotinoid pesticides, imidacloprid, and clothianidin, focusing on their impact on honey bee toxicity and foliar residue levels. Alfalfa was selected as control crop while bell peppers, and cucumbers were chosen as representative application crops, respectively. The investigation involved comparing the toxicity and foliar residue levels resulting from soil and foliar treatments, with a focus on identifying potential shortcomings in conventional foliar residue toxicity testing methods. Imidacloprid and clothianidin were applied to crops or soil at recommended rates and through irrigation. The honey bee mortality rate (RT₂₅) over time was determined, and pesticide residues on leaves were quantified using High-Performance Liquid Chromatography (HPLC). The results revealed that foliar treatment with imidacloprid on alfalfa resulted in an RT₂₅ of less than 1 day, with residues ranging from 1.07 to 19.27 mg/kg. In contrast, application on bell peppers showed RT₂₅ within 9 days, with residues ranging from 1.00 to 45.10 mg/kg. Clothianidin foliar treatment displayed RT₂₅ within 10 days on alfalfa, with residues between 0.61 and 2.57 mg/kg. On bell peppers, RT₂₅ was within 28 days, with residues ranging from 0.13 to 2.85 mg/kg. Soil treatment with imidacloprid and clothianidin in alfalfa exhibited minimal impact on honey bees and residues of 0.05 to 0.37 mg/kg. However, in applied crops, imidacloprid showed RT₂₅ within 28 days and residues ranging from 4.47 to 130.43 mg/kg, while clothianidin exhibited RT₂₅ within 35 days and residues between 5.96 and 42.32 mg/kg. In conclusion, when comparing honey bee toxicity and foliar residues among crops, application crops had a more significant impact on honey bee mortality and higher residue levels compared to control crops. Moreover, soil treatment for application crops resulted in higher RT₂₅ and residue levels compared to foliar treatment. Therefore, to ensure pesticide safety and environmental sustainability, diverse research approaches considering different crops and application methods are necessary for the safety assessment of imidacloprid and clothianidin.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2013

This study focuses on a ship detection and tracking method using Frequency Modulated Continuous Wave (FMCW) radar used for horizontal surveillance. In general, FMCW radar can play an important role in maritime surveillance, because it has many advantages such as low warm-up time, low power consumption, and its all weather performance. In this paper, we introduce an effective method for data and signal processing of ship's detecting and tracking using the X-band radar. Ships information was extracted using an image-based processing method such as the land masking and morphological filtering with a threshold for a cycle data merged from raw data (spoke data). After that, ships was tracked using search-window that is ship's expected rectangle area in the next frame considering expected maximum speed (19 kts) and interval time (5 sec). By using this method, the tracking results for most of the moving object tracking was successful and those results were compared with AIS (Automatic Identification System) for ships position. Therefore, it can be said that the practical application of this detection and tracking method using FMCW radar improve the maritime safety as well as expand the surveillance coverage cost-effectively. Algorithm improvements are required for an enhancement of small ship detection and tracking technique in the future.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.501-508
• /
• 2014

Objectives: This study identified the general characteristics of asbestos inspection/analysis laboratories in Korea and confirmed the actual situations in terms of technical aspects from these characteristics. In addition, given the background of the current problem, it offers preliminary data for determining future plans for improvement. Methods: A questionnaire was developed and distributed to the asbestos inspection/analysis laboratories that used the ISO/IEC 17025 for asbestos sampling and testing by UKAS(United Kingdom Accreditation Service) and the Korea Laboratory Accreditation Scheme(KOLAS). A total of 202 institutions in Korea were selected for the study and 145(71.8%) questionnaires were returned. Results: The number of personnel of the surveyed institutions averaged $4.2{\pm}2$ and 79.3% operated with less than five persons. In terms of education, the capital and other densely populated areas showed a high level of education(p<0.05). The level of education and facilities were determined by the magnitude of the institution(p<0.05). Institutions managed by highly educated directors were well-stocked with education and facilities(p<0.05). Institutions which had directors with considerable experiences received high scores overall and in particular higher scores in terms of education and facilities(p<0.05). At the level of the bottom five percent, the factor of education was 40.4% while the factor of measurement 49%, the factor of analysis 59%, the factor of facilities 61%, and the factor of survey 81%, respectively. Conclusions: To improve the quality of the institutions, in the short term, the problems identified in this study can be used to revise the related regulations. In the long term, a grading system of survey institutions needs to be established through the introduction of an accreditation system. However, the ongoing support of a government agency is required, including holding seminars and open education, suggesting guidelines for operation of asbestos inspection/analysis labs, and other means.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.8
• /
• pp.781-788
• /
• 2013

Predicting the engine component temperature is a basic step to conduct structural safety evaluation in medium-speed diesel engine design. Recent trends such as increasing power density and performance necessitate more effective thermal management of the engine for achieving the desired durability and reliability. In addition, the local temperatures of several engine components must be maintained in the proper range to avoid problems such as low- or high-temperature corrosion. Therefore, it is very important to predict the temperature distribution of each engine part accurately in the design stage. In this study, the temperature of an engine component is calculated by using steady-state conjugate heat transfer analysis. A proper approach to determine the thermal load distribution on the thermal boundary area is suggested by using 1D engine system analysis, 3D transient CFD results, and previous experimental data from another developed engine model. A Hyundai HiMSEN engine having 250-mm bore size was chosen to validate the analysis procedure. The predicted results showed a reasonable agreement with experimental results.