• 한국산업보건학회지
• /
• 제16권3호
• /
• pp.290-301
• /
• 2006

A push pull hood system is frequently applied to control contaminants evaporated from an open surface tank. Efficiency of push pull hood system is affected by various parameters, such as, cross draft, vessel shapes, tank surface area, liquid temperature. A previous work assisted by flow visualization technique qualitatively showed that a strong cross draft blown from the pull hood to push slot could destroy a stable wall-jet on the surface of tank, resulting in the abrupt escape of smoke from the surface. In this study, the tracer gas method was applied to determine the effect of cross-draft on the capture efficiency qualitatively. A new concept of capture efficiency was introduced, that is, linear efficiency. This can be determined by measuring the mass of tracer gas in the duct of pull hood while the linear tracer source is in between push slot and pull hood. By traversing the linear tracer source from the push slot to the pull hood, it can be found where the contaminant is escaped from the tank. Total capture efficiency can be determined by averaging the linear efficiencies. Under the condition of cross-draft velocities of 0, 0.4, 0.75, 1.05 and 1.47m/s, total capture efficiencies were measured as 97.6, 95.4, 94.6, 92.7 and 70.5% respectively. The abrupt reduction of efficiency with cross-draft velocity of 1.47m/s was due to the destruction of tank surface wall-jet by the counter-current cross-draft. The same phenomenon was observed in the previous flow visualization study. As an alternative to overcome this abrupt efficiency drop, the 20% increase of hood flow rates was tested, resulting in 20% efficiency increase.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.509-516
• /
• 2004

The measurement of abnormal change of temperature(temperature anomaly) will help determine the safety of various engineering constructions, as the measurement in body often used to diagnose one's health. Temperature anomaly can be occurred in leakage or seepage of water flow in rocks, and in ground water table etc. Grouting materials injected in fractured rocks generate heat during hardening process. The degree of temperature change is associated directly with heat flow characteristics, that is, thermal conductivity, specific heat capacity. density of the surrounding rocks and can afford to assess the grouting efficiency. However, in practice, the use of traditional temperature measuring technique composed of only one single thermal sensor has been fundamentally limited to acquire thermal data sufficient to use for that, partly due to the time-consuming measuring work, partly due to the non-consecutive quality of data. Thus, in this paper, a new concept of temperature measuring technique, what we call, thermal line sensor technique is introduced. In this, the sensors with an accuracy of $0.02^{\circ}$ are inserted at regular intervals in one line cable and addressed by a control device, which enables to fundamentally enhance the capability of data acquisition in time and space. This new technology has been demonstrated on diverse field model experiments. The results were simply meant to be illustrative of a potential to be used for various kinds of temperature measurements encountered in grouting and leakage problems.

• 한국병원경영학회지
• /
• 제23권1호
• /
• pp.28-40
• /
• 2018

Purpose: The purpose is to understand the perception of medical providers at tertiary hospitals in Seoul on the importance-performance of the reform on a doctor-designation system, and to provide the policy suggestion of the perception on such a system. Methodology: To achieve the purpose, this study utilized structured survey tools to conduct a questionnaire survey of nursing, administrative and medical technology professionals at six tertiary hospitals in Seoul. An importance-performance analysis was utilized for an analysis that showed the perception of the reform on a doctor-designation system. Findings: First, it was identified that those medical providers had the highest perception of the importance about the performance of the reform on a doctor-designation system. Second, according to the result of action grid of an importance-performance analysis (IPA), it can be identified that in the 2nd stage of 'Concentrate here' included are the items as to design and effect of medical care quality and subsidies & patient infection and safety and control fees, effect of income security of the method for compensating for loss established by the government and offering sufficient information on general medical services and doctor-designation medical services. In the 1st stage of 'Keep up the Good Work', and the 2nd stage of 'Concentrate here' included is the item as to the performance of patients of the reform on a doctor designation system. Practical Implications: There could be identified the effect of the reform bill on the perception of medical providers. It is expected that a better environment would be provided for patients to use a hospital and for medical providers to offer medical services, if the goverment makes efforts to improve methods for compensating for loss and continuous monitoring of the performance of patients.

• 한국산업보건학회지
• /
• 제17권3호
• /
• pp.203-211
• /
• 2007

This study was conducted in cut rose cultivation field in Goyang to evaluate pesticide exposure of farmers and the relationship between the exposure and work environment/method for cut rose farmers. Dermal exposure was assessed with patch (thin chromatography layer paper), cotton glove by body parts during mixing and spraying works in which pyrethroid, organophosphate, carbamate pesticide were used in 4 cut rose greenhouses located in Goyang province, checking characteristics of environment/working method at the same time. Body parts assessed were as follows ; glove : hand, patch : head, neck(front/back), chest, back, shoulder(right/left), upperarm(right/left), forearm(right/left), thigh(right/left), shin(right/left). Pesticides were analyzed using gas chromatography(NPD/FID) after extracting with ethyl acetate. Exposure amount differed according to pesticide type. But after standardizing with total net weight of pesticide sprayed, there were no significant difference among pesticides. There were significant difference in exposure amount among body parts(especially exposure amount of thigh, shin were more than the others), which means exposure happen not by pesticide dispersion in air but by contact with cut rose(leaf, branch) indirectly. Walking forward during spraying made farmers more exposed than waling backward, these results means contacts with leaves/branches made exposure happen in cut rose greenhouse also. As a result, pesticide exposure in cut rose greenhouse was related with contact of leaf/branch which pesticide remained in, which made exposure pattern (especially exposure amount) differ by body parts

• 디자인학연구
• /
• 제16권1호
• /
• pp.251-260
• /
• 2003

근무환경을 개선함으로써 업무효율이 높아지는 것이 자명한 상황에서 사무환경의 중요한 요소인 공간구획용 패널의 연구 개발은 필수적이다. 단순히 물리적 환경만이 아니라 심리적, 생리적, 경제적 환경까지 고려할 때 조립형 벽체 패널의 요구 조건으로는 차음/흡음 성능, 통신설비 설치 용이성 등을 포함한 기능적 요소, 최초 설치비용, 재활용성, 설치 용이성 등의 경제적 요소, 최종 마감 재질 및 형태 둥을 통한 시지각적 만족도를 위한 심미적 요소, 구조적 안정성, 건강성 등을 포함하는 안전 요소 등이 포함된다. 제품 개발을 통한 분석 결과, 재활용성을 높이고 현장작업의 축소 및 제품완성도를 높이기 위해 프레임식 구조의 장점을 살린 패널식 구조의 연구가 요구된다. 공장에서 많은 공정이 이루어질 수 있는 패널식 부재는 제품의 완성도를 높일 수 있는 장점이 있으나 시공현장에서의 융통성이 떨어질 수 있다. 따라서 현장 조건의 완성도가 낮아 발생하는 문제를 보완할 수 있는 디테일의 개발이 요구된다. 더불어 환경적 쾌적성에 영향을 주는 차음 및 흠음 성능, 안전과 건강을 고려한 디자인 및 재료에 대한 지속적 연구가 요구된다.

• 한국재난정보학회 논문집
• /
• 제4권2호
• /
• pp.40-50
• /
• 2008

The purpose of this study is to analyze the job of the security and secretary, to offer useful basic data throughout human resources management by withdrawing the ability required from the security and secretary based on the analyzed results. In this regard, this study intended to look into the job of the security and secretary, the necessary ability for the job of the security and secretary. To achieve the research goals, the study selected the research participants, composed of 5 secretaries for security with more than 5-year careers after graduating from a security and secretarial service department in a college and conducted an in-depth interview with them concerning their jobs. The in-depth interview data from the 5 participants was applied with a classification analysis used by Spradley (1980). In order to enhance the dependability and validity of the research, the study held an expert meeting composed of 2 persons with a doctoral degree in securities service studies and 1 person with a master's degree in secretarial information studies, twice. Also, the study drew results concerning the job of the security and secretary and the necessary ability of the job. Though the above process, the following conclusions were drawn; the job of the security and secretary includes the areas of job safety, a housing residence job, a health care job, an interpersonal relationships job, an assistant' s job, document and office works, general affairs, and an education job. The necessary ability for the job of the security and secretary involves martial arts abilities, risk management ability, the strict keeping of secrets, decision-making ability, information processing ability, foreign language proficiency, understanding other cultures, communications skills and office work ability.

• Smart Structures and Systems
• /
• 제16권3호
• /
• pp.383-399
• /
• 2015

Today, as railways increase their capacity and speeds, it is more important than ever to be completely aware of the state of vehicles fleet's condition to ensure the highest quality and safety standards, as well as being able to maintain the costs as low as possible. Operation of a modern, dynamic and efficient railway demands a real time, accurate and reliable evaluation of the infrastructure assets, including signal networks and diagnostic systems able to acquire functional parameters. In the conventional system, measurement data are reliably collected using coaxial wires for communication between sensors and the repository. As sensors grow in size, the cost of the monitoring system can grow. Recently, auto-powered wireless sensor has been considered as an alternative tool for economical and accurate realization of structural health monitoring system, being provided by the following essential features: on-board micro-processor, sensing capability, wireless communication, auto-powered battery, and low cost. In this work, an original harvester device is designed to supply wireless sensor system battery using train bogie energy. Piezoelectric materials have in here considered due to their established ability to directly convert applied strain energy into usable electric energy and their relatively simple modelling into an integrated system. The mechanical and electrical properties of the system are studied according to the project specifications. The numerical formulation is implemented with in-house code using commercial software tool and then experimentally validated through a proof of concept setup using an excitation signal by a real application scenario.

• 융합정보논문지
• /
• 제10권7호
• /
• pp.240-248
• /
• 2020

본 연구는 NCS 기반으로 개편된 미용사(피부) 검정형 자격과 과정평가형의 자격시험에 관한 선행연구의 체계적 문헌 고찰을 통해 국가기술자격 미용사(피부) 종목 과제 및 평가방법에 대해 비교·분석 하였다. 검정형 자격은 암기 위주의 이론시험과 단순 기능 반복을 통한 작업능력을 기반으로 평가가 이루어져 자격과 일이 상호 연계되지 않고 있고, 과정평가형 자격은 상대적으로 시험 집행을 시작한 기간이 짧은 상태로 시행기관에서의 자체 내부평가의 신뢰성 저하 문제가 지속적으로 나타나고 있다. 향후 현재 평가에 반영되고 있지 못하는 다양한 능력 단위를 적용하여 실기시험 평가 항목에 포함할 수 있는 상위자격의 신설 및 실기시험 평가방법 개선 등을 통해 현장과의 연계성을 제고시키고 관련 분야의 현장 적응 및 재교육 시간 단축 등의 자격제도 혁신이 필요한 것으로 사료된다.

• 한국건설관리학회논문집
• /
• 제7권5호
• /
• pp.149-158
• /
• 2006

종래의 깎기식 제거기에 의한 노면표시 제거작업은 인력에 의존하는 단순반복 작업으로 진행된다. 따라서 교통사고, 잔재제거에 사용되는 프로판 가스의 폭발, 작업자의 건강과 환경에 위해한 먼지와 유해가스 발생 등 위험요소가 상존하고 있다. 이러한 노면표시 제거작업의 문제점은 자동화 로봇화의 잇점으로 작용될 수 있다. 본 연구에서는 초고압수를 이용한 모바일 타입 노면표시 제거장비의 프로토타입을 개발하였다. 그 결과는 다음과 같다. 첫째, 현행 노면표시 제거작업 분석결과 노면표시 제거작업은 a)작업준비, b)노면표시제거, c) 현장정리로 구분할 수 있다. 이들 중 b) 노면표시제거작업의 전 공정을 수행할 수 있는 건설기 계장비가 필요함을 알 수 있었다. 둘째, 개발장비는 1일 8시간 작업 기준으로 약 1,400m를 작업할 수 있는 것으로 나타났다. 이 값을 기존방식의 작업량과 비교한 결과 280.0%의 생산성 달성 비율을 얻을 수 있는 것으로 분석되었다.

• 한국응급구조학회지
• /
• 제12권3호
• /
• pp.71-86
• /
• 2008

Purpose : This study was to examine the influence of job stress of 119 Emergency Medical Technician on fatigue and job satisfaction. Methods : Subjects of this study were 228 Emergency Medical Technicians who worked at 119 Safety Center of total 92 fire stations in 12 cities of Gyeonggido including U, N, H, B, A, S, Y, G, G, G, P and I and the period of data collection was from July 11 to Sep. 10, 2007. Collected data were analyzed with SPSS 14.0 version. Results : Conclusions of this study were as follows. 1) Factor related to organization among job stress factors had the greatest influence on fatigue (B = 0.334, p < 0.01), followed by crisis situation factor (B = 0.2042, p < 0.01), inappropriate treatment factor (B = 0.174, p < 0.05), role conflict factor as special job (B = 0.109, p < 0.05) and professional knowledge and technique factor (B = 0.109, p < 0.05), and the influence of job stress factors on fatigue was explained as $R^2=0.340$. 2) Mental burden factor of job stress factors had the greatest influence on job satisfaction (B = -0.606, p < 0.01), followed by organization factor (B = -0.473, p < 0.01) and interpersonal relation and conflict factor (B = -0.339, p < 0.01), and the influence of job stress factor on fatigue was explained as $R^2=0.308$. Conclusions : Job stress of 119 rescuer is increasing continuously and such an accumulated stress lowers the job efficiency. In order to reduce, job stress, it is important to extend(${\rightarrow}$ have) proper self-development, maintain close relationships and mutual correlations among members of organization in personal dimension and to solve the role conflicts, define the organizational roles and simplify excessive job description into concrete work.