• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.111-115
• /
• 1973

This experiment was carried out to study the effects of planting density and amount of fertilizer applied on the morphological, physiological and physical characteristics of barley culm. The results are summarized as follows: 1. Heavy application of fertilizer increased the diameter of the inside and outside thickness of culm, dry weight per unit culm, culm length, spike weight and number of per hill. 2. Thined planting density increased lodging resistance. But lodging resistance in sparse-planted plot of$20{\times}$ 20cm was almost the same as that in the plot of $15{\times}$ 15cm. 3. In the heavy fertilized plot weight of culm at breaking, bending moment of culm atbreaking, secondary moment of inertia and section modulus increased more than those in the standard fertilized one. As a result heavy application of fertilizer gave high lodging resistance. On the other hand thined planting density increased the above-mentioned physical characters of culm. 4. In the case of dense planting lodging index became higher in standard fertilized plot, but in the case of sparse planting over 10 x 10cm there were no significant differences in lodging index as affected by amount of fertilizer applied and planting density. 5. Grain yield was increased by heavy application of fertilizer and proper planting density was $5{\times}$ 5cm or $10{\times}$10cm for the safe maximum yield.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.1
• /
• pp.7-12
• /
• 2009

Mungbean should be harvested several times according to its physiological characteristics and weather conditions of cultivation region. In Korea, mungbean is usually sown in June and harvested three or four times, and the cultivated area is being rapidly reduced. Therefore, the author developed cultivation techniques of mechanical harvesting suitable for the weather conditions of the southern part of the Korean peninsula. The optimum sowing time of mungbean for mechanical harvesting in southern part of Korea is around July 20. When sown around July 15, mungbean should be harvested twice and then the mechanical harvesting of mungbean was not possible. Meanwhile, when sown after July 25, the mechanical harvesting was possible but the maturing period was longer and the seed yield was decreased. Therefore, it is safe to say that in Korea the mechanical harvesting of mungbean is possible for the middle part of Korea when the plant is sown before July 20 and for the southern coastal region of Korea when sown after July 20 (if July 20 is set up as the baseline for the southern part of Korea). Out of Keumseong and Owool, which are popularized cultivars in Korea most, Owool is determined to be most appropriate for mechanical harvesting. Owool is favorable for mechanical harvesting because, when compared to Keumseong, it is higher both in plant height and in pod height, and also the seed yield is better.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.3
• /
• pp.213-220
• /
• 1993

This experiments were carries out to estimate the optimum final cutting date in autumn and the selection of highly adaptable varieties in mountainous pastures of Taekwalyong area. The evaluations were based on the data of varietal differences of dry weight of lant(DW) and yield components of the 1st cutting as affected by various final cutting dates of last autumn. Nine varieties of fall fescue Barvetia, Fuego, Demeter, Safe Barcel Forager, Johnstone, Enforcer and Stef, were used and 4 final cutting date of autumn were $C_1$, cut on 30 Sept. $C_2$, on 14 Oct. $C_3$, on 28 Oct. and $C_4$ on 11 Nov.. respectively. The results obtained were as follows; 1. Between the dry weight of plant(DM) and yield components of 1st cutting were different by various final cutting dates of autumn. The dry weight of plant(DW) was significantly positive correlated with heading characteristics of the 1st cutting in earlier cuttings$(C_1-C_3)$ of autumn, but there was not significant correlated with heading characteristics of the 1st cutting in the latest cutting$(C_4)$ of autumn. 2. The variety of Forager with heavier weight of heading tiller(HTW) and dry weight of tiller(WT) showed the highest dry weight plant(DW) of the 1st cutting in earlier cuttings$(C_1-C_3)$ of autumn, whereas the variety of Barcel with high number of tillers per plant(NT) showed a high dry weight of plant(DW) of the 1st cutting in the latest cutting$(C_4)$ of autumn. 3. Optimum final cutting date and critical period of mountainous pastures in Taekwalyong area were estimated in late September$(C_1)$ and middle October$(C_2)$, sespectirety. 4. The dry weight of plant(DW) of the 1st cutting was significantly negative correlated with final cutting dates in growth period of autumn.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1439-1443
• /
• 2006

This study was performed on the effects of extraction temperature, pressure, time on apparent solubility and extraction yield of perilla oil and tocopherol, and color and fatty acid composition of the residue in supercritical carbon dioxide $(SC-CO_2)$ extraction. Apparent solubility of perilla oil and tocopherol increased with the increase of $CO_2$ density and was found to strongly depend on extraction pressure rather than extraction temperature. The extract yield of tocopherol in $SC-CO_2$ extraction increased with an increase of temperature and decreased with an increase of pressure and extraction time. The perilla oil apparent solubility of dried perilla powder for $60\sim180$ min at $40^{\circ}C/276$ bar increased with an extraction time, on the other hands, tocopherol apparent solubility decreased. As the increase of $CO_2$ density, less redness and yellowness increased. Fatty acid composition of perilla oil showed that perilla oil extracted by $SC-CO_2$ had better unsaturated fatty acid and decreased in saturated fatty acid. $SC-CO_2$ extraction offers a safe natural method for gaining perilla oil from dried perilla seeds powder.

• Tuberculosis and Respiratory Diseases
• /
• v.85 no.4
• /
• pp.341-348
• /
• 2022

Background: An accurate diagnosis in patients with interstitial lung diseases (ILDs) by multidisciplinary discussion (MDD) based on histopathologic information is essential for optimal treatment. Transbronchial lung cryobiopsy (TBLC) has increasingly been used as a diagnostic alternative to surgical lung biopsy. This study aimed to evaluate the appropriate methods of TBLC in patients with ILD in Korea. Methods: A total of 27 patients who underwent TBLC were included. TBLC procedure details and clinical MDD diagnosis using TBLC histopathologic information were retrospectively analyzed. Results: All procedures were performed under general anesthesia with the fluoroscopic guidance in the operation room using flexible bronchoscopy and endobronchial balloon blocker. The median procedure duration was less than 30 minutes, and the median number of biopsies per participant was 2. Most of the bleeding after TBLC was not severe, and the rate of pneumothorax was 25.9%. The most common histopathologic pattern was alternative (48.2%), followed by indeterminate (33.3%) and usual interstitial pneumonia (UIP)/probable UIP (18.5%). In the MDD after TBLC, the most common diagnosis was idiopathic pulmonary fibrosis (33.3%), followed by smoking-related ILD (25.9%), nonspecific interstitial pneumonia (18.6%), unclassifiable-ILD (14.8%), and others (7.4%). Conclusion: This first single-center experience showed that TBLC using a flexible bronchoscopy and endobronchial balloon blocker with the fluoroscopic guidance under general anesthesia may be a safe and adequate diagnostic method for ILD patients in Korea. The diagnostic yield of MDD was 85.2%. Further studies are needed to evaluate the diagnostic yield and confidence of TBLC.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.406-413
• /
• 2019

The purpose of this research was to analyze the effect of different sowing times on the flowering and maturing of major soybean cultivars by varying day length and temperature in the central plain region. The average of growth period and cumulative temperature in five test cultivars by sowing times were 121 days and 2,972℃ on June 1, respectively and gradually decreased to 85 days, 2,042℃, respectively on July 20. Analysis of the flowering response according to the sowing times showed that flowering was greatly influenced by the decrease of photoperiod until the sowing on July 10, and the minimum number of days for flowering were 27 days, 36 days, respectively in early and mid-rate maturing type in the central plain region. Daepung 2 is classified to the same ecotype with Daewonkong, the total number of growing days was not different between two cultivars, but ripening period (R2-R6) was longer by 5 days and yield was higher by 11% in Daepung 2. The maturity rate was also high and safe enough to maintain more than 90% through the entire sowing times. This ecological characteristic can be usefully applied as a section index for breeding environmental stress resistant and high yielding soybean varieties. The yield of 4 domestic cultivars (except TI196944) sowing on July 20 were 85~92% levels compared to sowing on June 20.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.459-468
• /
• 2019

Changes in growing periods and productivities of crops under double cropping of potato-rice, potato-soybean and potato-maize, were investigated at the Paddy Experimental Fields in Miryang City from 2015 to 2018. Spring potatoes planted in early March showed a yield of 2.1-2.3 ton/10a and a period of 90 days. In double cropping, growing period of rice, soybean, and maize was about 130, 125 and 115 days, respectively. The potato yield obtained was as much as 616, 330 and 815 kg/10a under double cropping with rice, soybean and maize, respectively. It is beneficial to sow the spring potatoes as early as possible to increase the yield and to secure the growing period of sequential crops. The introduction of summer medium-late variety grain crops into double cropping of spring potato and rice as well as into double cropping of spring potato and soybean/maize, was possible because of no sowing in the fall and plants were able to reach the heading growth stage before the safe heading limit of rice in particular. In the case of maize, the growth period was different according to the change in temperature over the year. The introduction of upland crops such as soybeans and maize instead of rice improved soil physicochemical properties in a short period of time, contributing to the increase of spring potato yields, but there was also a risk of damage by successive cropping for more than three years. Spring potato-maize showed higher yield in terms of starch production, and spring potato-soybean was found to be advantageous for net income.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.165-173
• /
• 2014

Open-pit mining method, is safe relatively work as compared with underground mining. And high yield, low production cost, has the advantage that it can provide a lot of production. But deforestation, tailings and slag deposition, mineral debris, dust, water, noise, land subsidence, sediment runoff discharge, I have internalized environmental disaster predisposing factors, such as landslides. Thus, it may be noted, also by typical environmental regulations. We try to deal with the changes in open pit terrain and environment related issues. Then, use the recovery period and the open pit mine and ecology off the gun, environment-friendly development of accurate monitoring methods, systems of this development is required. The use of open platforms and open source GIS tools have been developed during this period, it needs to develop spatial information environment monitoring system open pit mine construction.

• Journal of Pharmacopuncture
• /
• v.17 no.2
• /
• pp.57-66
• /
• 2014

Objectives: This study was performed to analyze single dose toxicity and the lethal dose of Scolopendrid Pharmacopuncture in rats. Methods: All experiments were conducted at the Korea Testing & Research Institute (KTR), an institution authorized to perform non-clinical studies, under the regulations of Good Laboratory Practice (GLP). Sprague-Dawley rats were chosen for the pilot study. Doses of Scolopendrid pharmacopuncture, 0.1, 0.5, and 1.0 mL, were administered to the experimental group, and 1.0 mL doses of normal saline solution were administered to the control group. This study was conducted under the approval of the Institutional Animal Ethic Committee. Results: No deaths or abnormalities occurred in any of the groups. No significant changes in the weight, hematological parameters or clinical chemistry were noted between the control group and the experimental group. To check for abnormalities in organs and tissues, we used microscopy to examine representative histological sections of each specified organ; the results showed no significant differences in any of the organs or tissues. Conclusion: The above findings suggest Scolopendrid Pharmacopuncture is a relatively safe to use for treatment. Further studies on the subject should be conducted to yield more concrete evidence.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.6
• /
• pp.957-964
• /
• 2020

Objective: An experiment was conducted to determine the effect of partial replacement of soybean meal (SBM) by white lupine seeds (WLS) on milk yield and quality, feed efficiency and rumen fermentation of high-yielding dairy cows. Methods: Thirty multiparous cows of two breeds (20 Holstein and 10 Czech Pied cows) in early mid-lactation received three diets (treatments) in a 3×3 Latin square design with a 28-d period. The dietary treatments were as follows: CON (control total mixed ration with SBM, no WLS), WLS30 (30% of the SBM was replaced, on a dry matter basis, by WLS), and WLS50 (50% of the SBM was replaced by WLS). Results: Feed intake by the cows was not affected (p = 0.331) by the diets. Milk production decreased with increasing proportions of WLS in the diet. Cows fed WLS50 yielded approximately 1 kg/d (p<0.001) less milk than cows fed the CON diet. The proportions of milk fat (p = 0.640), protein (p = 0.507), and lactose (p = 0.709) were not altered by the diet. For milk fat, feeding with WLS50 reduced the proportion of total saturated fatty acids (p<0.001) and increased the proportion of total monounsaturated fatty acids (p<0.001), mainly through oleic acid (p<0.001). No differences were found in feed efficiency, body weight, and blood plasma metabolites between groups. Rumen ammonia-N levels tended (p = 0.087) to increase with increasing proportions of WLS in the diet, whereas no effect of diet on rumen pH was found (p = 0.558). Conclusion: We did not identify the safe range within which raw WLS can efficiently replace SBM in the diet of high-producing dairy cows. In contrast, even partial replacement of SBM by WLS favorably changed the milk fatty acid profile.