• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권5호
• /
• pp.529-544
• /
• 2018

Ship owners now demand a new design approach for the rudder that considers detailed design information such as maneuverability and environmental loads etc. on a quantified basis. In this paper, we developed the concept of a safe operation capability chart for the design of a rudder area. The chart can be used as the basis of design considering the maneuverability and environmental loads. To confirm the applicability of the safe operation capability chart for use as the basis of design, four different rudders are assumed in this work. First, it is determined whether or not it is appropriate to design a rudder by applying a conventional design approach based on IMO maneuvering tests. The proposed concept is reviewed for use as the basis of the design by investigating the effect of rudder area on capability charts that are plotted according to the rudder under various environmental conditions.

• 전력전자학회논문지
• /
• 제27권4호
• /
• pp.339-347
• /
• 2022

This study proposes the mitigation method for overcurrent and oscillation motor current in an active short-circuit operation. This operation is attracting attention as the safe state of electric vehicle traction inverters. However, the active short-circuit operation generates oscillation and overcurrent of motor currents during a transient state. The proposed method uses two different safe states in PMSM, such as active short circuit and freewheeling. The active short circuit is used for safe state in a steady state. To reduce the overshoot and oscillation, a freewheeling state is injected between active short-circuit operation by comparing the motor phase current with an analytically calculated steady-state motor current. Freewheeling state is only used in a transient state. The performance is demonstrated through simulations and experimental results. The peak current of the motor was reduced from 52 A to 40 A, and oscillation time was reduced.

• 한국항해항만학회지
• /
• 제29권10호
• /
• pp.833-838
• /
• 2005

이 논문은 M 방송국이 요청한 $100m{\sim}500m$의 이격거리를 유지하기 위하여 실습선 "한바다"호와 행사지원 선박과의 치소 안전이격거리에 대하여 다룬 것이다. 이 최소안전 이격거리는 조종곤란도를 정량적으로 평가하는 ES Model과 해상교통류 시뮬레이션을 이용하여 평가하였는데 그 결과는 2노트로 항진하는 실습선 "한바다"호의 경우 약 260m이고 이 값을 실제의 값과 비교하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.283-288
• /
• 2001

This study provides analytical evaluation of the Dual-Ann Work Module. The current hydraulic system was modeled using the HyPneu and analyzed to find the cause of the instability. The cause of the instability was determined to be primarily an interacting involving the pilot operated check valves and the counterbalance valves for fail safe mode of operation. A new design concept was developed to eliminate the potential for unstable operation while adequately meeting the need for a fail-safe feature.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.122-128
• /
• 2020

This research investigates how a Virtual Reality (VR)-based simulation could be used to train safe operation skills for forklift operators. Forklift operation is categorized as high-risk work by many occupational health and safety regulators and authorities due to high injury and fatality rates involved with forklifts. Therefore, many safety guidelines have been developed for forklift operators. Typically, forklift operation safety training is delivered based on instructional texts or videos, which have limitations in influencing people's safety behavior. Against this background, we propose a VR-based forklift simulator that can enable safe operation skills training through a feedback system. The training program consists of several modules to teach how to perform the basic tasks of forklift operation, such as driving, loading and unloading, following the safety guidelines. The system provides instantaneous instructions and feedback regarding safe operation. This training system is based on the model of "learning-by-doing". The user can repeat the training modules as many times as necessary before being able to perform the given task without violating any safety guidelines. The last training module tests the user's acquisition of all safety skills required. The user feedback from several demonstration sessions showed the potential usefulness of the proposed training system.

• Progress in Superconductivity
• /
• 제6권2호
• /
• pp.138-141
• /
• 2005

Bi-2223/Ag tapes need to be safe, even it is under the over-critical current state for the protection of a superconducting power machine. However, it is not easy to identify the condition for the safe operation because of their broad S/N transition region. In this paper, for the study of the operation condition of Bi-2223/ Ag tapes, we investigated the V-I curves and the temperature variation of Bi-2223/ Ag tapes experimentally, applying alternating over-currents, and analyzed the relationship between resistance and temperature increase. For the experiments, a Bi-2223/Ag tape of 57 A $I_c$ was prepared, and the over-critical current characteristics under adiabatic state from $LN_2$ was measured. From the experiments, we confirmed that the Joule heating predicted by V-I curve corresponded with the increase of the measured temperature exactly. Using the results, a safe operation condition of Bi-2223 tape was discussed.

• 해양환경안전학회지
• /
• 제13권4호
• /
• pp.71-78
• /
• 2007

예부선은 항만 개발 및 매립, 해상교량 건설, 항로 준설 등 우리나라 해양 산업 건설에 핵심적인 공헌과 역할을 수행하여 왔다. 또한 국내 등록 척수로는 가장 많은 비중을 차지하고 있고, 부선의 경우 전용화와 대형화가 꾸준히 진행되어 일반 상선과 등급의 부선이 운항되고 있다. 이로 인한 해양사고의 증가에도 불구하고 예부선에 대한 국가적인 차원에서의 안전운항 대책이 미흡한 실정이다. 본 연구는 최근 빈번하게 발생하고 있는 해상교량과 관련된 예부선의 사고에 대한 안전 운항 대책을 제안하고자 한 것으로, 해양사고의 통계 자료와 사례 분석, 예부선 운항 실태를 운송계약 측면과 인원 구성을 검토하여 해상교량의 안전 통항을 위해 선학 자체적으로 점검해야 하는 항해계획과 운항점검표를 일례로 제시하고, 예부선의 안전운항 향상을 위한 전자차트시스템 기반의 안전항행지원시스템을 제안한다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2007년도 춘계학술발표회
• /
• pp.101-108
• /
• 2007

예부선은 항만 개발 및 매립, 해상교량 건설, 항로 준설 등 우리나라 해양 산업 건설에 핵심적인 공헌과 역할을 수행하여 왔다. 또한 국내 등록 척수로는 가장 많은 비중을 차지하고 있고, 부선의 경우 전용화와 대형화가 꾸준히 진행되어 일반 상선과 동급의 부선이 운항되고 있다. 이로 인한 해양사고의 증가에도 불구하고 예부선에 대한 국가적인 차원에서의 안전운항 대책이 미흡한 실정이다. 본 연구는 최근 빈번하게 발생하고 있는 해상교량과 관련된 예부선의 사고에 대한 안전 운항 대책을 제안하고자 한 것으로, 해양사고의 통계 자료와 사례 분석, 예부선 운항 실태를 운송계약 측면과 인원 구성을 검토하여 해상교량의 안전 통항을 위해 선박 자체적으로 점검해야 하는 항해계획과 운항점 검표를 일례로 제시하고, 예부선의 안전운항 향상을 위한 전자차트시스템 기반의 안전항행지원시스템을 제안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.153-156
• /
• 2001

The transformer and the OF cable are cooled and insulated by insulating oils in their body. The insulating oil expands or contracts with the heat transfer according to the operating conditions of the electric facilities. So we install the $N_2$ gas tank connected with the insulating oil system to overcome the change. The change of the insulating oil volume for the operation temperature range must be calculated to decide the $N_2$ gas volume and to set the alarm point for safe operation. It is known that this change is proportional to the temperature change and to the insulating oil volume if the temperature change is small enough.[1][11] However this proportional formula has been accepted generally in the design of electric facilities for wide operation temperature range such as $40^{\circ}C{\sim}125^{\circ}C$. Hence, it makes large errors in calculation which car result in serious damage against safe operation of the electric facilities. This paper presents a improved method of calculating the accurate change of the insulating oil volume to insure the safe operation of electric facilities.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.421-431
• /
• 2023

Nuclear power plants (NPPs) have technical specifications (Tech Specs) to ensure that the equipment and key operating parameters necessary for the safe operation of the power plant are maintained within limiting conditions for operation (LCO) determined by a safety analysis. The LCO of Tech Specs that identify the lowest functional capability of equipment required for safe operation for a facility must be complied for the safe operation of NPP. There have been previous studies to aid in compliance with LCO relevant to rule-based expert systems; however, there is an obvious limit to expert systems for implementing the rules for many situations related to LCO. Therefore, in this study, we present a retrieval methodology for similar LCO cases in determining whether LCO is met or not met. To reflect the natural language processing of NPP features, a domain dictionary was built, and the optimal term frequency-inverse document frequency variant was selected. The retrieval performance was improved by adding a Boolean retrieval model based on terms related to the LCO in addition to the vector space model. The developed domain dictionary and retrieval methodology are expected to be exceedingly useful in determining whether LCO is met.