• Title/Summary/Keyword: STRETCHED

Search Result 383, Processing Time 0.025 seconds

Stereoscopic 3-D shape constancy (입체시에 근거한 3차원 모양 항상성의 검증)

  • 이형철
    • Korean Journal of Cognitive Science
    • /
    • v.10 no.3
    • /
    • pp.17-28
    • /
    • 1999
  • Systematic distortions in perceived 3-D shape were obtained for elliptical and parabolic stereoscopic surfaces viewed at different distances under full and reduced cue conditions. In both conditions of Experiments 1 and 3, elliptical hemi-cylinders a appeared near veridical at the 45 cm viewing distances and flattened up to 74% of veridical at 135 cm. In Experiment 2, under full cue conditions, parabolic hemi-cylinders a appeared stretched to 118% of veridical at 45 cm, near veridical at 90 cm, and flattened to 85% of veridical at 135 cm. Under reduced cue conditions parabolas appeared flatter overall: veridical curvature was obtained at 45 cm viewing distance with flatness increasing to 68% of veridical at 135 cm. Results support a scaling explanation of perceived 3-D shape from disparity and rule out the alternative hypothesis that disparity curvature, an optical invariant, provides information for the direct perception of 3-D s shape.

  • PDF

Fine Structure of the Heart Tube and Its Cardiac Muscle Cells in the Spider, Araneus ventricosus (산왕거미 (Araneus ventricosus) 심관과 심근세포의 미세구조)

  • Choi, Jae-Young;Moon, Myung-Jin
    • Applied Microscopy
    • /
    • v.33 no.4
    • /
    • pp.325-333
    • /
    • 2003
  • Fine structural characteristics of the heart tube and its cardiac muscle cells in spider, Araneus ventricosus are investigated by both of scanning and transmission electron microscopes. The heart tube of the spider is extended mid-dorsally along the anterior part of the abdomen, and is consisted of the thin outer layer of connective tissue (epicardium) and the thick muscle layer (myocardium). The myocardium in the spider has a typical fanlike spiral structure toward anterior part put across between the muscle fibers. Therefore, it did not give rise to the intima, and muscle cells are in direct contact to the hemolymph. The heart tube appeared to be three pairs of ostia and numerous hemocytes accumulated at the inner surface of the myocardial layer. Among several kinds of the hemocytes, the oenocytoids are the most predominant hemocytes accumulated along the myocardial folds which stretched toward heart lumen. The heart muscle cells are cross striated, branched, and multinucleated. They contain a lot of mitochondria, which provide for the continuous energy demands of the heart. Thread-like ganglion on the dorsal side of the heart tube gives off axons that innervate the heart muscle cells.

A Comparison of the Shoulder Stability Muscle Activity according to the Shoulder Flexion Angles in Open and Closed Kinetic Chain Exercise (열린사슬운동과 닫힌사슬운동에서 어깨 굽힘 각도에 따른 어깨안정화 근육의 근활성도 비교)

  • Lee, Seungjun;Kim, Taegyun;Lee, Geoncheol;Bae, Wonsik
    • Journal of The Korean Society of Integrative Medicine
    • /
    • v.3 no.1
    • /
    • pp.81-90
    • /
    • 2015
  • Purpose: The purpose of this study was to investigate any visible difference in shoulder stability muscle activity along the bending angle($70^{\circ}$, $90^{\circ}$, $110^{\circ}$) to perform the open kinetic chain(OKC) and closed kinetic chain(CKC) exercise. Method: This study was performed on normal 20 males subjects. Exercise was carried out in two ways OKC and CKC. Shoulder stability muscles are examined activity in the bending angles. In the OKC and CKC exercise to subjects with stretched out waist straightened, and than push forward the shoulder. Muscular activation was examined using the WEMG-8. Result: The results of this study were as follows. 1. Only in the trapezius muscle, it showed specific interaction between exercise methods and angles. When it comes to muscle activity, there was no significant difference in all muscles except for the anterior fibers of the deltoid muscle during both CKC and OKC exercise. 2. The average value of maximum muscle activity was significantly increased with increasing order of angles. But in CKC exercise, the muscle activity of infraspinatus tended to decrease with increasing angles. Conclusion: To summarize the research results, the muscle activity in upper fibers of the trapezius, anterior fibers of the deltoid, and serratus anterior was significantly different depending on the angle of the shoulder in both CKC and OKC exercise.

The Influence of Physical Functions on Clothing Behavior of Elderly People (고령자의 신체 기능이 의복 착용 행동에 미치는 영향)

  • Lee, Eun-Suk;Jeong, Su-Jin;Chu, Mi-Seon
    • Fashion & Textile Research Journal
    • /
    • v.14 no.1
    • /
    • pp.136-143
    • /
    • 2012
  • The purpose of this study was to investigate the influence of physical functions of elderly people on their clothing behavior and to provide basic information about manufacturing comfortable apparels for the elderly. A total of 219 people, with ages between 60s and 70s, participated in the survey and in the experiment to correlate their tendency of wearing clothes with the state of their physical functions. About 78.5% of the elderly showed eyesight deterioration in the subjective evaluation. Elders in their 60s raised their arms higher up in overhead reach, and showed shorter distance between middle fingertips in behind back stretch and in back scratch than elders in their 70s. Also, the former stretched farther to the floor in standing trunk flexion, and maintained more steady in one leg stand and in tandem stance than the latter. The narrower the movement range of the upper limb joints was, the more the elderly preferred upper garments with full front opening to those with half or no opening. The more inflexible the upper limbs and waist and the more unbalanced the body was, the more likely the elderly put on pants while sitting on the floor. The time taken to button up the shirt and to put on and take off pants showed a positive correlation with the overhead reach, the behind back stretch, the back scratch and the standing trunk flexion, whereas the former showed a negative correlation with the one leg stand and the tandem stance.

Development of sit-to-stand assistive chair using a pneumatic cylinder: a feasibility test

  • Hong, SoungKyun;Lee, GyuChang
    • Physical Therapy Rehabilitation Science
    • /
    • v.9 no.3
    • /
    • pp.197-200
    • /
    • 2020
  • Objective: The purpose of this study was to develop and investigate the feasibility of a sit-to-stand assistive chair using a pneumatic cylinder. Design: Cross-sectional study. Methods: The sit-to-stand assistive chair was developed to assist the sit-to-stand movement by rising up of the chair by a pneumatic cylinder. After the user is seated on the chair, if the pneumatic cylinder pulls the seat plate when standing up, the spring of the pneumatic cylinder, which has been stretched, assists in rising the rear end of the seat plate so that the user can stand conveniently and comfortably. A feasibility test was performed in 10 heathy adults. The electromyographic muscle activation of the trunk and lower extremity muscles was analyzed, which included the erector spinae, rectus abdominis, quadriceps, tibialis anterior, gastrocnemius when standing up from sitting using the developed chair and standing up without using the developed chair. Results: As a result, the sit-to-stand assistive chair using a pneumatic cylinder was developed. In the feasibility test, the use of the developed chair had a decrease in rectus abdominis, quadriceps, tibialis anterior activation compared to those who did not use the device in the healthy adults. Conclusions: The sit-to-stand assistive chair using a pneumatic cylinder may be helpful to reduce the activation of the rectus abdominis, quadriceps, tibialis anterior muscles when performing a sit-to-stand movement. Through the results, the efficacy of the sit-to-stand assistive chair can be confirmed. In the future, further studies are warranted to investigate for the safety and efficacy of its use in the elderly population or those who are disabled.

Correlation of morphological changes of rice starch granules with rheological properties during heating In excess water (가열 조리시 쌀 전분 입자들의 형태학적 변화와 리올로지 특성과의 관계)

  • Lee, Young-Eun;Osman, Elizabeth M.
    • Applied Biological Chemistry
    • /
    • v.34 no.4
    • /
    • pp.379-385
    • /
    • 1991
  • Morphological changes of starch granules from 12 different varieties of rice were examined by scanning electron microscopy during heating at 2.5% (w/v) concentration. Rice starch granules proceeded through a similar pattern of progressive morphological changes daring heating, regardless of variety. Rice starch granules began to swell radially in the initial stage of gelatinization and then undergo radial contraction and random tangential expansion to form complex structures in the latter stage of gelatinization temperature range. At higher temperatures, starch granules softened and melted into thin flat discs, and then stretched into thin filaments to form three-dimensional networks. These progressive morphological changes were reflected in the changes of swelling power, solubility and amylograph viscosity of starch. During the transition of melting or softening, swelling power, solubility and amylograph viscosity increased rapidly. The time of loss of granular structure of starch depended on gelatinization temperature range. The ratio of amylose to amylopectin was largely responsible fur the rate of melting or softening and the fineness of a three-dimensional filamentous network above the gelatinization temperature range. Therefore, both the gelatinization temperature range and amylose content of starch affect the rate of cooking, and amylose content of starch affects the final texture of cooked starch paste.

  • PDF

The Immediate Effects of Kinesio Taping on Quadriceps Induced Fatigue by Short-term Squat (단시간의 스쿼트 운동으로 피로 유발된 대퇴사두근에 대한 키네시오 테이핑의 즉각적 효과)

  • Ahn, Ick-keun;Jeon, Jae-guk;Kim, Dong-ya
    • The Journal of Korean Academy of Orthopedic Manual Physical Therapy
    • /
    • v.21 no.1
    • /
    • pp.21-28
    • /
    • 2015
  • Background: The purpose is to investigate the immediate effects of kinesio taping on quadriceps induced fatigue by short-term squat. Methods: This research is cross-over designed study and conducted as a single-blind. Eleven students (Age: $18.91{\pm}0.49yrs$, height: $167.09{\pm}8.46cm$, $62.55{\pm}11.32kg$) were participated in this study. All the participants were applied short-term squat for inducing fatigue, and then intervented all three conditions (kinesio taping applied condition, placebo taping applied condition, non-taping applied condition). The interval of each intervention was at least a seven days to prevent carry-over effects. The participants were tested peak torque (isometric contracture) and active joint position sense (active JPS) pre-post intervention. A paired t-test was used to find the significance of pre-post intervention results and one-way ANOVA was used to find the significance between interventions with significant level as .05. Results: Peak torque was significantly increased on KT condition (p<.05). But there were no significant effects on active JPS. Because kinesio taping facilitates Ia afferent by tactile stimulation with stretched skin, reduced muscle power by short term squat which induce muscle fatigue was increased. But kinesio taping does not affect mechanoreceptor in muscles, induced active JPS by short-term squat had no changes.

  • PDF

Structure Variation of Polypropylene Hollow Fiber Membrane with Operation Parameters in Stretching Process (연신 공정 조업변수에 따른 폴리프로필렌 중공사막의 구조 변화)

  • Lee Gyu-Ho;Kim Jin-Ho;Song Ki-Gook;Kim Sung-Soo
    • Polymer(Korea)
    • /
    • v.30 no.2
    • /
    • pp.175-181
    • /
    • 2006
  • Hybrid process of thermally-induced phase separation and stretching was developed for the preparation of microporous polypropylene hollow fiber membranes. Precursor for stretching was prepared by using soybean oil as a diluent and benzoic acid as a nucleating agent far the sphenlite control and it was stretched far the micrporous hollow fiber membrane. The effects of stretching ratio and deformation rate for stretching process were investigated. Increase of stretching ratio resulted in the greater pore size with nonuniform size distribution. Higher deformation rate also increaser the pore size with uniform size distribution. Stretching ratio was closely related with the orientation of polymer chain and increased the mechanical strength of the fiber. Increase of deformation rate had little effects on the orientation of crystalline phase, and decreased the orientation of amorphous phase which caused the decrease of tensile strength of the fiber and broke the micro-fibrils connecting spherulites to form a circular pore shape.

Fabrication and Characterization of Environmentally Friendly PLA/PPC/PLA Multilayer Film (친환경 PLA/PPC/PLA 적층필름의 제조 및 특성 연구)

  • Lee, Deuk-Young;Kim, Kyung-Youn;Cho, Misuk;Nam, Jaedo;Lee, Youngkwan
    • Polymer(Korea)
    • /
    • v.37 no.2
    • /
    • pp.249-253
    • /
    • 2013
  • From poly(lactic acid) (PLA) and poly(propylene carbonate) (PPC) synthesized using $CO_2$, a PLA/PPC/PLA layered film is prepared by coextrusion and then stretched to uniaxial orientation. The mechanical, optical, and barrier properties and shrinkage of the prepared film were investigated in detail. The maximum shrinkage of PLA/PPC/PLA film reached to 60% at $75^{\circ}C$. With increasing PPC content, the ratio of shrinkage of the film was increased and its shrinkagerate was increased. The ratio of shrinkage of the film decreased with increasing stretching temperature. The prepared film has oxygen and vapor transmission barrier properties. In this study, the PLA/PPC/PLA film is expected to be commercialized as a environmentally friendly shrinkable film.

Flow Directions and Source of the Dongmakgol Tuff in the Cheolwon Basin, Korea (철원분지 동막골응회암의 유향과 공급지)

  • Hwang, Sang-Koo;Kim, Jae-Ho
    • The Journal of the Petrological Society of Korea
    • /
    • v.19 no.1
    • /
    • pp.51-65
    • /
    • 2010
  • The Dongmakgol Tuff is a stratigraphic unit which is composed of voluminous ignimbrites in the Cheolwon basin. The ignimbrites belong to pumice-rich vitric tuffs that show eutaxitic to parataxitic fabrics from fiamme or pumice clasts. They are almost densely welded and strongly flattened, but often parallel aligned and stretched. Also they exhibit flow indicators such as flow lineations, imbrications, tensional cracks and boudins from their alignment and/or elongation, and lithic and pumice clasts show lateral grading in their average maximum diameter. Flow direction map from the lineations, asymmetric structures and lateral grading diagram indicate that the Dongmakgol Tuff has a source from its southwestern part near a boundary between southern Dongmakri and northern Gomunri, and is considered that the ignimbrites took emplacement processes of laminar flows during the final stage of flowage and the flow lineations are from the result of shear stress during that times.