• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.92-105
• /
• 2000

Core technologies of powerplants, which are necessary for the development of Korean type combat aircraft, are analyzed. And then, the acquisition methodologies for the technologies are proposed. With respect to the aircraft engine design and manufacturing technologies, simple basic technologies such as component manufacturing and assembling technology come to close to those of advanced countries, but the core technologies were not acquired or in the understanding level only. Therefore, the research on the component manufacturing technology should be specialized for buildup of international competition first, and the research on core technologies such as high pressure compressor design, blisk, FADEC and hollow fan blade design should be concentrated step by step by taking an active participation in the development project of international cooperative aircraft powerplants.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.745-750
• /
• 2011

A jig vise is a device to clamp workpiece precisely, which is widely used for various machine tools and manufacturing purpose. A new elastic structured jaw-wedge of jig vise is developed, in this paper, so as to satisfy the clamping requirement and the suppression effect of upright movement of workpiece. The advanced design parameters of jaw-wedge are derived step by step considering the stress distribution and the displacement profiles of ANSYS analysis, and it could find the optimum model which shows the uniform displacement profiles and exhibits the non-concentrated stress distribution of jaw neck. As a result, it is ascertained that an jaw-wedge developed in this study is the simple elastic structure which is effective for automatic multiple clamping purpose without the danger of shear crack or bucking of jaw.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.908-910
• /
• 2007

Thin Film Transistor (TFT) manufacturing process is complicated. Electrostatic discharge (ESD) occurs during every process step. This paper describes ESD phenomena in terms of TFT design and processing flow. The abnormal contact between equipment and glass is found out to be the key reason causing ESD.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.3
• /
• pp.581-595
• /
• 1997

The procedure of grouping the machines and parts to form cells is called manufacturing cell design. The manufacturing cell design is an important step in the development and implementation of advanced manufacturing systems. For the successful implementation of the manufacturing systems, identification of independent manufacturing cells, i.e., cells where parts are completely processed in the cell and no intercell movements, is necessary in the design phase. In this paper, we developed a mixed integer programming model and genetic algorithm based procedure to solve the independent manufacturing cells design problem considering the alternative process plans and machines duplication. Several manufacturing parameters such as, production volume, machine capacity, processing time, number of cells and cell size, are considered in the process. The model determines the process plan for parts, port families and machine cells simultaneously. The model has been verified with the numerical examples.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.1
• /
• pp.72-78
• /
• 2004

In this paper, mechanical behaviors of developed pedicle screw system, made of bio-mechanical materials(Ti-6Al-4V, Grade 5), ale predicted using FEM analysis. As a first step, morphologic construction of normal Korean spines and surgical operation convenience are considered to design optimum pedicle screw system. In this step, various design variables are considered as design parameters to develop optimized models. As a next step, tension and bending tests are performed to improve the structural performance of the developed system using finite element method. In this step, required Static compression and bending test specifications by ASTM F-04 25 04 01 are applied to understand the bio-mechanical behaviors of the designed spinal implant system under various load types. As the results of this research, it is possible to develop efficient pedicle screw system, having enough rigidity and fixation to stand any spinal damage under allowable stress conditions.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.9
• /
• pp.84-89
• /
• 2021

Indium tin oxide (ITO) transparent electrodes, which are used to manufacture organic light-emitting diodes, are used in light-emitting surface electrodes of display EL panels such as cell phones and TVs, liquid crystal panels, transparent switches, and plane heating elements. ITO is a major component that consists of indium and tin and is advantageous in terms of obtaining sheet resistance and light transmittance in a thin film. However, the optical performance of devices decreases with an increase in its thickness. A digital holography system was constructed and measured for the step measurement of the ITO thin film, and the reliability of the technique was verified by comparing the FE-SEM measurement results. The error rate of the step difference measurement was within ±5%. This result demonstrated that this technique is useful for applications in advanced MEMS and NEMS industrial fields.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.2015-2018
• /
• 2005

In this paper, we are willing to prepare the reasonable optimization, Combinatorial Optimization and Genetic Algorithm. Thus we define position status of end-effect (or terminative link module) using promised form, (G, M(G), A(G), and so on.). For this preparing step, the reorganizing procedure of Link and Joint Module is necessary, like as enumerating the kinematically identical assembly group of several links and joints. Thus, we draw a G, directed graph in a first step. Because, directed graph contains the path information between adjacent Link Module and Joint Module. From the directed graph,G, we can incite the Incidence Matrix, M(G). The incidence matrix, M(G), contains the contact information of the Link (Joint) Module and the type of Link (Joint). At the end of this paper, we generalize the modular information as a matrix form, A(G). From this matrix, we can make a population of assembly status. That is the finial output of this paper.

• Transactions of Materials Processing
• /
• v.13 no.3
• /
• pp.216-224
• /
• 2004

In this study, we have developed a new UV$({\lambda}=355nm)$ laser micromachining technology by direct ablation method without masks. This technology allows that 3D micro parts can be fabricated rapidly and efficiently with a low price. And it has a benefit of reducing fabricating process simply. Due to micro parts' fabrication, such technologies need the control of XYZ stages with high precision, the design of optical devices to maintain micron spot sizes of laser beam and the control technology of laser focus. The developed laser manufacturing process for laser micromachining is that, after extracting coordinates of shape data from CAD model data, a beam path considering manufacturing features of laser beam is created by using genetic algorithm. This generated manufacturing process is sent to stage controller. In order to improve the surface quality of micro parts, we have carried out experiments on iteration manufacturing and beam step-over by using a minimum focus size. Moreover, we have fabricated a micro-channel through the developed laser micromachining technology and verified it through the results.

• IE interfaces
• /
• v.8 no.3
• /
• pp.75-95
• /
• 1995

ISO (International Standard Organization)에서는 산업전반에 걸친 다양한 제품의 설계, 해석, 생산, 그리고 관리에 필요한 모든 제품정보를 정의하는 STEP (Standard for the Exchange of Product model data) 표준을 1983년부터 추진하고 있으나, 이를 지원하는 상용 프로그램들은 아직 초기 단계에 있어 이들을 활용하여 시스템 통합을 구현 할 수 없다. 본 연구에서는 현재 STEP에서 부분적으로 정의되어 있는 현상, 형상 특징, 공차, 프로세스, 그리고 제품 관리 정보 등을 통합하여, CAD, CAPP, 그리고 MRP 시스템 간에 정보를 교환하는 프로토타입을 개발하였다. EXPRESS로 표현된 통합 정보 모델은 STEP의 공통자원에 새로운 엔티티와 속성을 추가하여 구성하였고, IGES 파일 변환기, STEP 파일 에디터, 그리고 데이타베이스 인터페이스를 통하여 통합 정보를 저장하고 교환한다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.34-35
• /
• 2000

In optical pick-up systems, it's important of the efficiency of lens. We had simulated and estimated the efficiency of micro fresnel lenses which designed according to various focal lengths and wave lengths. Also we had simulated and estimated the micro fresnel lenses with a step-shape which number of steps are 2, 4 and 7. Through studies on between step_shape and design factor, we have obtained a proper number of step-shape fresnel lens for manufacturing that.