• Journal of Welding and Joining
• /
• v.28 no.4
• /
• pp.81-86
• /
• 2010

In resistance spot welding, regardless of the optimal condition, bad weld quality was still produced due to complicated manufacturing processes such as electrode wear, misalignment between the electrode and workpiece, poor part fit-up, and etc.. Therefore, the goal of this study was to measure the process signal which contains weld quality information, and to develop the process fault monitoring system. Welding force signal obtained through variety experimental conditions was analyzed and divided into three categories: good, shunt, and poor fit-up group. And then a monitoring algorithm made up of an artificial neural network that could estimate the process fault of each different category based on pattern was developed.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.342-344
• /
• 2007

The resistance spot weldability of surface textured cold-rolled steel sheet was evaluated. One steel sheet(T4.5) showed reduced electrode life with less than 2000 welds, and all other steel sheets(E2.2, E4.5, T2.2) made more than 2500 welds. The carbon imprint test revealed that there is sudden electrode diameter increase around 1700 welds. It is believed that the increased electrode diameter decreased current density, and resulted in decreasing weld electrode life due to small weld button size. It is considered that surface roughness difference may attribute to heating during weld cycle and reduced the weld electrode life.

• Mycobiology
• /
• v.39 no.4
• /
• pp.310-312
• /
• 2011

Septoria centellae associated with leaf spot of Centella asiatica is reported for the first time in Korea. The fungus is described and illustrated in detail. It is also compared with related species of Septoria present on Centella and Hydrocotyle spp. with taxonomic comments. Two monoconidial isolates from Jeju and Wando were successfully cultured and have been deposited in the Korean Agricultural Culture Collection.

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.8-14
• /
• 2020

Intelligent devices using ICT technology have been introduced in the field of construction machinery to improve productivity and stability. Among the intelligent devices, Machine Guidance is a device that provides real-time posture, location, and work range to drivers by installing various sensors, controllers, and satellite navigation systems on construction machines. Conversely, the efficiency of equipment that requires location information, such as machine guidance, will be greatly reduced in buildings, and tunnels in the GPS blind spots. Thus, the other high-precision positioning technologies are required in the GPS blind spot zone. In this study, we will develop a relative position measurement system that provides precise location information such as construction machinery and robots in a local area where the GPS reception is difficult. A relative position measurement system tracks a marker in the form of a sphere installed on a vehicle by using the image base tracking technology, and measures the distance and direction information to the marker to calculate a position.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.376-383
• /
• 2022

The current study, which consisted of two independent studies (laboratory and greenhouse), was carried out to project the hypothesis fungi-spray scheduling for leaf mold and gray leaf spot in tomato, as well as to evaluate the effect of temperature and leaf wet duration on the effectiveness of different fungicides against these diseases. In the first experiment, tomato leaves were infected with 1 × 10⁴ conidia·mL^-1 and put in a dew chamber for 0 to 18 hours at 10 to 25℃ (Fulvia fulva) and 10 to 30℃ (Stemphylium lycopersici). In farm study, tomato plants were treated for 240 hours with diluted (1,000 times) 30% trimidazole, 50% polyoxin B, and 40% iminoctadine tris (Belkut) for protection of leaf mold, and 10% etridiazole + 55% thiophanate-methyl (Gajiran), and 15% tribasic copper sulfate (Sebinna) for protection of gray leaf spot. In laboratory test, leaf condensation on the leaves of tomato plants were emerged after 9 hrs. of incubation. In conclusion, the incidence degree of leaf mold and gray leaf spot disease on tomato plants shows that it is very closely related to formation of leaf condensation, therefore the incidence of leaf mold was greater at 20 and 15℃, while 25 and 20℃ enhanced the incidence of gray leaf spot. The incidence of leaf mold and gray leaf spot developed 20 days after inoculation, and the latency period was estimated to be 14-15 days. Trihumin fungicide had the maximum effectiveness up to 168 hours of fungicides at 12 hours of wet duration in leaf mold, whereas Gajiran fungicide had the highest control (93%) against gray leaf spot up to 144 hours. All the chemicals showed an around 30-50% decrease in effectiveness after 240 hours of treatment. The model predictions in present study could be help in timely, effective and ecofriendly management of leaf mold disease in tomato.

• Journal of Welding and Joining
• /
• v.24 no.4
• /
• pp.1-5
• /
• 2006

• Transportation Technology and Policy
• /
• v.9 no.4
• /
• pp.41-46
• /
• 2012

• Journal of Welding and Joining
• /
• v.30 no.3
• /
• pp.4-14
• /
• 2012

• Korean Journal of Plant Resources
• /
• v.33 no.6
• /
• pp.558-577
• /
• 2020

Isoflavone contents in soybean seeds are affected by both genetic and environmental factors. Correlation analysis between these factors and isoflavone contents are considered as valuable inputs when breeding improved soybean cultivars. In this study, the seeds of 49 soybean accessions grown in Korea were grouped as black, yellow, green, yellowish-green, pale yellow, and green with a black spot based on their seed coat colors. The contents of 12 isoflavones were analyzed and the association between isoflavone content and seed coat color was determined. The accessions were also grouped as early, intermediate, and late-maturing based on their days to maturity. Out of the 12 isoflavones, 11 were found in 2 accessions, 9 in 18 accessions, 8 in 11 accessions, 7 in another 11 accessions, and 6 in 7 accessions. The total isoflavone content (TIC) in black, yellow, green, yellowish-green, pale yellow, and green with black spot soybeans was in the ranges 2.110 ~ 5.777, 2.487 ~ 4.733, 2.185 ~ 4.413, 2.681 ~ 4.065, 1.827 ~ 4.085, and 3.376 ~ 4.133 mg/g, respectively. The average TIC was highest in green with black spot soybeans (3.616 mg/g), and lowest in pale yellow soybeans (2.875 mg/g). Besides, the average TIC was lowest in early maturing accessions compared to late- and intermediate-maturing accessions. TIC was strongly correlated to malonylgenistin (r = 0.91) and malonyldaidzin (r = 0.78) contents, and poorly correlated to glycitein (r = 0.04) and malonylglycitin (r = 0.18) contents. Also, days to maturity showed strong correlation with malonylgenistin (r = 0.47) content and TIC (r = 0.38). The principal component analysis outlined accessions with high TIC and diverse isoflavones along the first and second components, respectively. The results of the present study depicted that green soybeans with a black spot could be sources of high TIC. Furthermore, late-maturing accessions with diverse isoflavones in their seeds could be useful in future agricultural systems in Korea.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.4
• /
• pp.349-354
• /
• 2004

The growth mode of the Si layers which were grown on Si(111) by using Ag as surfactant were investigated by intensity oscillations of the RHEED specular spot at the different temperatures. we found that the introduction of Ag as the surfactant alters the growth mode from a three-dimensional clustering mechanism to a two-dimensional layer-by-layer growth. In the growth of Si layers on Si(111) with a surfactant Ag, At $450^{\circ}C$, RHEED intensity oscillation was very stable and periodic from early stage of deposition to 32 ML. RHEED patterns during homoepitaxial growth at $450^{\circ}C$ was changed from $7{\times}7$ structure into ${\sqrt{3}}{\times}{\sqrt{3}}$ structures. Since the ${\sqrt{3}}{\times}{\sqrt{3}}$ structure include no stacking fault, the stacking fault layer seems to be reconstructed into normal stacking one at transition from the $7{\times}7$ structure to a ${\sqrt{3}}{\times}{\sqrt{3}}$ one. We also found that the number of the intensity oscillation of the specular spot for Si growth with a surfactant Ag was more than for Si growth without a surfactant. This result may be explained that the activation energy decrease for the surface diffusion of Si atoms due to segregation of the surfactant toward the growing surface.