• Title/Summary/Keyword: SPE cell

Search Result 51, Processing Time 0.021 seconds

Poly(ethylene oxide)/Poly(vinylidene fluoride) Blend (고분자 전해질의 전도도 특성)

  • 김종욱;성창호;구할본
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1996.11a
    • /
    • pp.109-112
    • /
    • 1996
  • The purpose of this study is to research and develop solid polymer electrolyte(SPE) for all-stolid-state lithium battery. We investigated conductivity, electrochemical properites and impedence spectroscopy of poly(ethylene oxide)[PEO]/poly(vinylidene fluoride)[PVOF] blend electrolytes and charge/discharge cycling of LiCoO$_2$/SPE/Li cell. By adding PVDF and plasticizer to PEO-LICIO$_4$electrolyte, its condustivity was higher than that of PEO-LiCIO$_4$electrolyte. Also PEO$_4$PVDF$_4$LiClO$_4$PC$_{5}$EC$_{5}$ remains stable up to 4.4V vs Li/Li. The discharge capacity of the LiCoO$_2$composite cathode was 92mAh/g based on LiCoO$_2$.EX>.

  • PDF

A Study on Solid-Phase Epitaxy Emitter in Silicon Solar Cells (고상 성장법을 이용한 실리콘 태양전지 에미터 형성 연구)

  • Kim, Hyunho;Ji, Kwang-Sun;Bae, Soohyun;Lee, Kyung Dong;Kim, Seongtak;Park, Hyomin;Lee, Heon-Min;Kang, Yoonmook;Lee, Hae-Seok;Kim, Donghwan
    • Current Photovoltaic Research
    • /
    • v.3 no.3
    • /
    • pp.80-84
    • /
    • 2015
  • We suggest new emitter formation method using solid-phase epitaxy (SPE); solid-phase epitaxy emitter (SEE). This method expect simplification and cost reduction of process compared with furnace process (POCl3 or BBr3). The solid-phase epitaxy emitter (SEE) deposited a-Si:H layer by radio-frequency plasma-enhanced chemical vapor deposition (RF-PECVD) on substrate (c-Si), then thin layer growth solid-phase epitaxy (SPE) using rapid thermal process (RTP). This is possible in various emitter profile formation through dopant gas ($PH_3$) control at deposited a-Si:H layer. We fabricated solar cell to apply solid-phase epitaxy emitter (SEE). Its performance have an effect on crystallinity of phase transition layer (a-Si to c-Si). We confirmed crystallinity of this with a-Si:H layer thickness and annealing temperature by using raman spectroscopy, spectroscopic ellipsometry and transmission electron microscope. The crystallinity is excellent as the thickness of a-Si layer is thin (~50 nm) and annealing temperature is high (<$900^{\circ}C$). We fabricated a 16.7% solid-phase epitaxy emitter (SEE) cell. We anticipate its performance improvement applying thin tunnel oxide (<2nm).

Improving data reliability on oligonucleotide microarray

  • Yoon, Yeo-In;Lee, Young-Hak;Park, Jin-Hyun
    • Proceedings of the Korean Society for Bioinformatics Conference
    • /
    • 2004.11a
    • /
    • pp.107-116
    • /
    • 2004
  • The advent of microarray technologies gives an opportunity to moni tor the expression of ten thousands of genes, simultaneously. Such microarray data can be deteriorated by experimental errors and image artifacts, which generate non-negligible outliers that are estimated by 15% of typical microarray data. Thus, it is an important issue to detect and correct the se faulty probes prior to high-level data analysis such as classification or clustering. In this paper, we propose a systematic procedure for the detection of faulty probes and its proper correction in Genechip array based on multivariate statistical approaches. Principal component analysis (PCA), one of the most widely used multivariate statistical approaches, has been applied to construct a statistical correlation model with 20 pairs of probes for each gene. And, the faulty probes are identified by inspecting the squared prediction error (SPE) of each probe from the PCA model. Then, the outlying probes are reconstructed by the iterative optimization approach minimizing SPE. We used the public data presented from the gene chip project of human fibroblast cell. Through the application study, the proposed approach showed good performance for probe correction without removing faulty probes, which may be desirable in the viewpoint of the maximum use of data information.

  • PDF

Detection of Lawsonia intracellularis in swine feces by polymerase chain reaction (돼지분변에서 PCR에 의한 Lawsonia intracellularis 검색)

  • 장성준;김정화;김영태;김기향;김중규;김영욱;최일영
    • Korean Journal of Veterinary Service
    • /
    • v.24 no.1
    • /
    • pp.43-50
    • /
    • 2001
  • Swine proliferative enteritis(SPE) caused by inかsoma intracellularis is a common enteric disaese of grower and finisher pig. Swine affected with SPE show variable clinical signs including diarrhea, weight loss, aberrant growth and death. The characteristic lesion of ileitis at necropsy is marked thickening of the last section of the small intestine. The inner lining of the thickened intestine proliferates almost like a cancer and curved rod bacteria(L intracellularis) are always seen inside the intestinal wall. Infected swine shed the organism in the feces. Isolation and growth of pure L intracellularis in vitro requires a suitable cell culture. This procedure is difficult and not a practical means of diagnosis, thus the polymerase chain reaction(PCR) test of feces can be used to determine whether a pig is shedding the infective organism. A sensitive assay based on amplification of a 319bp DffA fragment of the L intracellularis of Swine proliferative enteritis was attempted for the detection of the organism in the 62 feces of swine. L intracellularis was identified on three herds and detected in 6 fecal samples, representing a infection rate of 9.7%. The PCR was very sensitive and specific on the individual level. The PCR technique could be very useful for the diagnosis of this disease.

  • PDF

Electrochemical Characteristics of Solid Polymer Electrode Fabricated with Low IrO2 Loading for Water Electrolysis

  • Ban, Hee-Jung;Kim, Min Young;Kim, Dahye;Lim, Jinsub;Kim, Tae Won;Jeong, Chaehwan;Kim, Yoong-Ahm;Kim, Ho-Sung
    • Journal of Electrochemical Science and Technology
    • /
    • v.10 no.1
    • /
    • pp.22-28
    • /
    • 2019
  • To maximize the oxygen evolution reaction (OER) in the electrolysis of water, nano-grade $IrO_2$ powder with a low specific surface was prepared as a catalyst for a solid polymer electrolyte (SPE) system, and a membrane electrode assembly (MEA) was prepared with a catalyst loading as low as $2mg\;cm^{-2}$ or less. The $IrO_2$ catalyst was composed of heterogeneous particles with particle sizes ranging from 20 to 70 nm, having a specific surface area of $3.8m^2g^{-1}$. The anode catalyst layer of about $5{\mu}m$ thickness was coated on the membrane (Nafion 117) for the MEA by the decal method. Scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS) confirmed strong adhesion at the interface between the membrane and the catalyst electrode. Although the loading of the $IrO_2$ catalyst was as low as $1.1-1.7mg\;cm^{-2}$, the SPE cell delivered a voltage of 1.88-1.93 V at a current density of $1A\;cm^{-2}$ and operating temperature of $80^{\circ}C$. That is, it was observed that the over-potential of the cell for the oxygen evolution reaction (OER) decreased with increasing $IrO_2$ catalyst loading. The electrochemical stability of the MEA was investigated in the electrolysis of water at a current density of $1A\;cm^{-2}$ for a short time. A voltage of ~2.0 V was maintained without any remarkable deterioration of the MEA characteristics.

High Density Culture of KA112 Hybridoma and Effect of Glucose Concentration on MAb Productivity (하이브리도마의 고농도 배양과 포도당 농도가 MAb 생산성에 미치는 영향)

  • 박상재;최차용
    • KSBB Journal
    • /
    • v.8 no.5
    • /
    • pp.478-482
    • /
    • 1993
  • Perfusion culture was conducted in Celligen perfusion culture system using a self-constructed hybridoma cell and low serum medium. The culture system employed hollow fiber to separate cells from the culture broth. Maximum cell density of $2.1\times10^7$ ce11s/m1, 10 times higher than in batch culture, could be achieved. Concentration of monoclonal antibody (MAb) was 4 times higher and production rate at maximum feed rate was 9 times higher than in batch culture. Glucose concentration was very important for the cell growth and MAb production. When glucose concentration was below 1g/l, i. e. 0.5~0.9g/l, specific MAb production rate decreased but cell concentration still increased. As the glucose concentration goes above 1g/l, specific MAb production rate increased and remained at maximum value at more than 1.5g glucose/l. The maximum value of the specific Mab production rate was similar to that of batch culture.

  • PDF

Protective effect of gallic acid derivatives from the freshwater green alga Spirogyra sp. against ultraviolet B-induced apoptosis through reactive oxygen species clearance in human keratinocytes and zebrafish

  • Wang, Lei;Ryu, BoMi;Kim, Won-Suk;Kim, Gwang Hoon;Jeon, You-Jin
    • ALGAE
    • /
    • v.32 no.4
    • /
    • pp.379-388
    • /
    • 2017
  • In the present study, we enhanced the phenolic content of 70% ethanol extracts of Spirogyra sp. (SPE, $260.47{\pm}5.21$ gallic acid equivalent $[GAE]mg\;g^{-1}$), 2.97 times to $774.24{\pm}2.61GAE\;mg\;g^{-1}$ in the ethyl acetate fraction of SPE (SPEE). SPEE was evaluated for its antiradical activity in online high-performance liquid chromatography-ABTS analysis, and the peaks with the highest antiradical activities were identified as gallic acid derivatives containing gallic acid, methyl gallate, and ethyl gallate. Isolation of ethyl gallate from Spirogyra sp. was performed for the first time in this study. In ultraviolet B (UVB)-irradiated keratinocytes (HaCaT cells), SPEE improved cell viability by 8.22%, and 23.33% and reduced accumulation of cells in the sub-$G_1$ phase by 20.53%, and 32.11% at the concentrations of 50 and $100{\mu}g\;mL^{-1}$, respectively. Furthermore, SPEE (50 and $100{\mu}g\;mL^{-1}$) reduced reactive oxygen species generation in UVB-irradiated zebrafish by 66.67% and 77.78%. This study suggests a protective activity of gallic acid and its derivatives from Spirogyra sp. against UVB-induced stress responses in both in vitro and in vivo models, suggesting a potential use of SPEE in photoprotection.

Growth and Cadmium Removal in Recombinant Saccharomyces cerevisiae Harboring A Metallothionein Gene (Metallothionein 유전자가 도입된 재조합 Saccharomyces cerevisiae의 생육과 카드뮴 제거)

  • 김대옥;박성식서진호
    • KSBB Journal
    • /
    • v.11 no.5
    • /
    • pp.543-549
    • /
    • 1996
  • Recombinant Saccharomyces cerevisiae BZ-pJ containing the gene coding for metallothionein, a metalbinding protein was grown in the medium with high cadmium concentrations to study the characteristics of growth and cadmium uptake. High concentrations of cadmium reduced cell growth and final cell density and increased the lag phase periods of the recombinant yeast. Addition of 10 mg $Cd^{2+}$/L to the growth medium remarkably decreased a lag period and enhanced the specific cadmium uptake to 52.6 mg $Cd^{2+}$/g dry cell. The effect of copper addition was further investigated in the medium of 680 mg Cd2+/L. An increase in copper concentration from 11.0 to 33.3 mg/L enhanced the specific cadmium uptake from 17.0 to 42.0 mg Cd2+/g dry cell.

  • PDF

Epistatic Relationships of Two Regulatory Factors During Heterocyst Development

  • Kim, Young-Saeng;Kim, Il-Sup;Shin, Sun-Young;Kim, Hyun-young;Kang, Sung-Ho;Yoon, Ho-Sung
    • ALGAE
    • /
    • v.24 no.2
    • /
    • pp.85-91
    • /
    • 2009
  • The filamentous cyanobacterium Anabaena sp. Strain PCC 7120 produces a developmental patten of single hete- rocysts separated by approximately 10 vegetative cells. Heterocysts differentiate from vegetative cells and are spe- cialized for nitrogen fixation. The patS gene, which encodes a small peptide that inhibits heterocyst differentiation, is expressed in proheterocysts and plays a critical role in establishing the heterocyst pattem. Another key regulator of heterocyst development is the hetR gene. hetR mutants fail to produce heterocysts and extra copies of hetR on a plas- mid cause a multiple contiguous heterocyst phenotype. To elucidate the relationship between these two counter act- ing factors in the genetic regulatory pathway during heterocyst differentiation, the expression patterns of a patS-gfp and a hetR-gfp fusion were examined in a patS deletion and a hetR deletion strain. The results, in combination with the result from a hetR and patS double deletion strain, suggest patS and hetR are mutually antagonistic and the bal- ance between these two factors in tow different cell types (heterocysts and vegetative cells) may be critical during the decision making process on their cell fates.

Surface Modification of Nafion by Layer-by-Layer Self-Assembled Films of Polyaniline and Sulfonated Poly(ether sulfone) for Direct Methanol Fuel Cell (직접 메탄올 연료전지용 나피온 막의 폴리아닐린/Sulfonated Poly(ether sulfone) 다층 자기조립 박막에 의한 표면 개질)

  • Ok, Jeong-Rim;Kim, Dong-Wook;Lee, Chang-Jin;Kang, Yong-Ku
    • Journal of the Korean Electrochemical Society
    • /
    • v.11 no.4
    • /
    • pp.256-261
    • /
    • 2008
  • In this study, Nafion membrane was modified to prevent methanol crossover by layer-by-layer self assembly using polyaniline (PANi) as a polycation and sulfonated poly(ether sulfone) (SPES) as a polyanion onto the Nafion surface. Since PANi and SPES possess thermal and chemical stability and rigid backbone, their layer-by-layer self-assembled films on the Nafion are expected to reduce methanol permeability and to increase mechanical stability. UV-Vis absorption spectroscopy verified a linear build-up of the multilayers of PANi and SPES. We found that the thickness per bilayer was about 10 nm by TEM measurement. Although modified Nafion membrane exhibited 15% decrease of proton conductivity, it reduceded 67% of methanol permeability compared to that of the pristine Nafion membrane, resulting in 2.5 times larger selectivity. At the performance test of the fuel cell using 5M methanol as a fuel, the modified Nafion membrane showed 2.4 times higher maximum power density at $30^{\circ}C$ and 1.4 times larger at $60^{\circ}C$ than the pristine Nafion.