• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.183-196
• /
• 2016

Ground control points are needed for precision geometric correction of satellite images, and the coordinates of a high-quality ground control point can be obtained from the GPS measurement. However, considering the GPS measurement requires an excessive amount o f t ime a nd e fforts, there is a need for coming up with an alternative solution to replace it. Therefore, we examined the possibility of replacing the existing GPS measurement with coordinates available at online maps to acquire the coordinates of ground control points. To this end, we examined error amounts between the coordinates of ground control points obtained through Daum Map API, and them compared the accuracies between three types of coordinate transformation equations which were used for geometric correction of satellite images. In addition, we used the coordinate transformation equation with the highest accuracy, the coordinates of ground control point obtained through the GPS measurement and those acquired through D aum M ap A PI, and conducted geometric correction on them to compare their accuracy and evaluate their effectiveness. According to the results, the 3rd order polynomial transformation equation showed the highest accuracy among three types of coordinates transformation equations. In the case of using mid-resolution satellite images such as those taken by Landsat-8, it seems that it is possible to use geometrically corrected images that have been obtained after acquiring the coordinates of ground control points through Daum Map API.

• Progress in Medical Physics
• /
• v.21 no.3
• /
• pp.261-273
• /
• 2010

For the use of Indirect-conversion CMOS (complementary metal-oxide-semiconductor) detectors for digital x-ray radiography and their better designs, we have theoretically evaluated the spatial-frequency-dependent detective quantum efficiency (DQE) using the cascaded linear-systems transfer theory. In order to validate the developed model, the DQE was experimentally determined by the measured modulation-transfer function (MTF) and noise-power spectrum, and the estimated incident x-ray fluence under the mammography beam quality of W/Al. From the comparison between the theoretical and experimental DQEs, the overall tendencies were well agreed. Based on the developed model, we have investigated the DQEs values with respect to various design parameters of the CMOS x-ray detector such as phosphor quantum efficiency, Swank noise, photodiode quantum efficiency and the MTF of various scintillator screens. This theoretical approach is very useful tool for the understanding of the developed imaging systems as well as helpful for the better design or optimization for new development.

• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.165-172
• /
• 2011

Visitors' behaviors within an exhibition space are a substantial means to grant spatial arrangement and validity of exhibits. Therefore, the study analyzed visitors' behaviors in the viewpoint of attraction power and holding power of exhibits on the basis of exhibition layout of real science museums. Through the analysis, the study grasped efficiency of analysis index and exhibition environment elements which might have an effect on planning the exhibition space of a large-scale museum and producing detailed ranges of exhibition. The main indicators used are: 1. Attraction power: it indicates the relative incidence of people who have stopped in front of an object/exhibit during the exhibition tour. It is calculated by dividing the number of people who stop by the total number of people who have visited the museum or gallery. 2. Holding power: it measures the average time spent in front of an information/communication element. It is calculated by dividing the average time of stay by the time "necessary" to read an element. As a result, It was expected that attraction power and holding power of exhibit would be increased when moving line of seeing was inductive. However, when the traffic movements of seeing was inductive, repetitive seeing of exhibit was almost never realized and visitors had a strong tendency which viewed on their way of moving without viewing on their way of stopping. On the other hand, it may mean that density of exhibit is low or size of exhibition space is small that most of exhibits within exhibition space have high attraction power and holding power. As Gwacheon National Science Museum, when a museum is composed of many large-scale exhibit halls, it should be formed by separating the main moving line of seeing from the optional moving line of seeing through visitors' natural choice of exhibit and proper inducement of moving line of seeing. In such structure, exhibition environment of the main moving line has an effect on attraction of exhibit and the use of optional moving line acts as a factor to increase attraction. In addition, it is thought that attribute of exhibit and proper arrangement of rest space within exhibition space will increase holding power of exhibit.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.3
• /
• pp.29-35
• /
• 2010

Soil organic carbon (SOC), being a help to forest formation and control of carbon dioxide in the air, is found to be an important factor by which global warming is influenced. Excavating the samples by whole area is very inefficient method to discovering the distribution of SOC. So, the development of suitable model for expecting the relative amount of the SOC makes better use of expecting the SOC. In the present study, a model based on a decision tree algorithm is introduced to estimate the amount of SOC along with accessing influencing factors such as altitude, aspect, slope and type of trees. The model was applied to a real site and validated by 10-fold cross validation using two softwares, See 5 and Weka. From the results given by See 5, it can be concluded that the amount of SOC in surface layers is highly related to the type of trees, while it is, in middle depth layers, dominated by both type of trees and altitude. The estimation accuracy was rated as 70.8% in surface layers and 64.7% in middle depth layers. A similar result was, in surface layers, given by Weka, but aspect was, in middle depth layers, found to be a meaningful factor along with types of trees and altitude. The estimation accuracy was rated as 68.87% and 60.65% in surface and middle depth layers. The introduced model is, from the tests, conceived to be useful to estimation of SOC amount and its application to SOC map production for wide areas.

• Journal of KIISE:Databases
• /
• v.33 no.3
• /
• pp.271-281
• /
• 2006

Recently the need for Location-Based Service (LBS) has increased due to the development and widespread use of the mobile devices (e.g., PDAs, cellular phones, labtop computers, GPS, and RFID etc). The core technology of LBS is a moving-objects database that stores and manages the positions of moving objects. To search for information quickly, the database needs to contain an index that supports both real-time position tracking and management of large numbers of updates. As a result, the index requires a structure operating in the main memory for real-time processing and requires a technique to migrate part of the index from the main memory to disk storage (or from disk storage to the main memory) to manage large volumes of data. To satisfy these requirements, this paper suggests a unified index scheme unifying the main memory and the disk as well as migration policies for migrating part of the index from the memory to the disk during a restriction in memory space. Migration policy determines a group of nodes, called the migration subtree, and migrates the group as a unit to reduce disk I/O. This method takes advantage of bulk operations and dynamic clustering. The unified index is created by applying various migration policies. This paper measures and compares the performance of the migration policies using experimental evaluation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.4
• /
• pp.242-249
• /
• 2006

Potential impacts of the future climate change on crop production can be inferred by crop simulations at a landscape scale, if the climate data may be provided at appropriate spatial scales. Northern Gyunggi Province is one of the few prospective regions in South Korea for growing quality soybeans. Any geographical shift of production areas under the changing climate may influence the current land planning policy in this region. A soybean growth simulation was performed at 342 land units in northern Gyunggi province to test the potential geographical shift of the current production areas for quality soybeans in the near future (form 2011 to 2100). The land units for soybean cultivation were selected by the land use, the soil characteristics, and the minimum arable land area. Daily maximum and minimum temperature, precipitation, the number of rain days and solar radiation were extracted for each land unit from the future digital climate models (DCM, 2011-2040, 2041-2070, 2071-2100). Daily weather data for 30 years were randomly generated for each land unit for each normal year by using a well-known statistical method. They were used to run CROPGRO-Soybean model to simulate the growth, phonology, and yields of 3 cultivars representing different maturity groups grown at 342 land units. According to the model calculations, the warming trend in this region will accelerate the flowering and physiological maturity of all cultivars, resulting in a 7 to 9 days reduction in overall growing season and a 1 to 15% reduction in grain yield of early to medium maturity cultivars. There was a slight increase in grain yield of the late maturing cultivar under the projected climate by 2070, but a decreasing tend was dominant by the year 2100.

• Archives of design research
• /
• v.11 no.3
• /
• pp.149-162
• /
• 1998

This study is what tried to examine the importance of material in industrial design. Then, if planning is to start of product design, the use of material is the last step to complete design. Design material has existed from the time before mankind were born, and the new material which is useful for human beings is developing rapidly. It is no exaggeration to say that our environment is the aggregation of material which was surrounded with us. Then, material has the timely, spatial and cultural feature as well as physical feature. Besides, all sorts of functions of communicating information are being contained in accordance with the character of material. The outside surface of material has the function to develop the sense organ of human beings. This study examines 4 kinds of cultural features in design materials and shown by findings is as follows : Rrst is the technical progressivity to lead new Design form. Second is the symbolic nature to perform the communication function. Third is the sensible attribute to develop surface effect of Design material. Fourth is the future-oriented nature to convince the future such as new material and technology etc. Thus, so as to perform the competitive product design, it is important to grasp the harmony between material and design, structure and processing, and the substantial meaning that the material has and apply them properly, above all. Because the discovery of material will be the measure to forecast future design.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.475-488
• /
• 2018

Surveying urban tributary vegetation is based mainly on field sampling at present. The tributary vegetation survey integrating UAV NIR(Unmanned Aerial Vehicle Near Infrared Radiance) imagery and in-situ point photo has received only limited attentions from the field ecologist. The reason for this could be the largely undemonstrated applicability of UAV NIR imagery by the field ecologist as a monitoring tool for urban tributary vegetation. The principal advantage of UAV NIR imagery as a remote sensor is to provide, in a cost-effective manner, information required for a very narrow swath target such as urban tributary (10m width or so), utilizing very low altitude flight, real-time geo-referencing and stereo imaging. An exhaustive and realistic comparison of the two techniques was conducted, based on operational customer requirement of urban tributary vegetation survey: synoptic information, ground detail and quantitative data collection. UAV NIR imagery made it possible to identify area-wide patterns of the major plant communities subject to many different influences (e.g. artificial land use pattern), which cannot be acquired by traditional field sampling. Although field survey has already gained worldwide recognition by plant ecologists as a typical method of urban tributary vegetation monitoring, this approach did not provide a level of information that is either scientifically reliable or economically feasible in terms of urban tributary vegetation (e.g. remedial field works). It is anticipated that this research output could be used as a valuable reference for area-wide information obtained by UAV NIR imagery in urban tributary vegetation survey.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.162-175
• /
• 2020

The purpose of this study is to deal with practical investigation, which blends symbolism on spatio-temporal level-especially typography in three-dimensional environment-and the symbolism of written language in the context of visual communication. Up until now, typography research and education have mainly been centered on two-dimensional environment and printing technology, such as the paper. However, this study is the result of this researcher's direct design and implementation of projects on typography aside from paper. Accordingly, this study is to provide an opportunity to raise the level of reason and expression used in visual communication to a new level and to expand its scope. To ensure the efficient progress of the project, this study was to identify the structure, system, and process of communication first. Furthermore, this study was to investigate two-dimensional and three-dimensional typography as the backbone of visual communication. In addition, several representative 3D typography works are analyzed in context and used as the conceptual framework of the project conducted for this study. Based on these results, this research verifies and suggests the possibility practically and objectively by creating the project series entitled Rhetorical Space in 3D typography. In addition, this research gives an opportunity to visualize ideas aimed at the development of character-based visual language and visual communication design in the realm of the more spatial, physical, and three-dimensional public environment.

• Korean Institute of Interior Design Journal
• /
• v.23 no.3
• /
• pp.173-180
• /
• 2014

Dwelling connotes characteristics like social and cultural and technical climatic conditions, lifestyles and demands of regions, and especially, apartment, as one of dwelling types, shows various aspects of modern society. With the economic development centering on large cities, apartments have been established as universal housing forms in Seoul and Shanghai. The deepening of economic development in cities has increased small households consisting of one or two persons by affecting the population and household structure, and they've become information consumer groups. This has also influenced the size of apartment and increased the demand for small-sized housing. If the floor area is small, it is possible to use space widely according to the plan composition, so there is a need for floor planning to understand natural environment, physical environment and residents.This study compared and analyzed plan compositions of small-sized apartments which have been parceled out for the recent three years in Seoul and Shanghai. This study aims to understand housing cultures and users in the two countries depending on natural environments, living habits and spatial functions by analyzing common points and differences of public spaces like living room, dining room and kitchen, and private spaces like bedroom which have absolute effects on room arrangement and traffic line. The study results are as follows. From the perspective of natural environments, in Seoul, two-sided open cross-ventilation structure where is favorable to lighting and ventilation, occupied the biggest proportion of public space, while in Shanghai, most public spaces had lighting and ventilation structures through windows in each room. In Seoul, 3R type occupied the largest proportion of private space(87.7%), and privacy was maintained and space scale was adjusted using spaces with diverse functions such as bathroom in the couple bedroom, dress room and powder room and variable walls. But 2R type occupied the largest proportion of private space(60.2%) in Shanghai, and they emphasized private space and privacy of each room depending on major living habits. In conclusion, this study for comparing and analyzing common points and differences of small-sized apartment plan compositions in Seoul and Shanghai will provide proper guidelines for small-sized apartments to be built in Seoul and Shanghai in the future, if strong points and weak points of plan compositions in the two countries will be additionally analyzed and remedied.