• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.119-130
• /
• 2003

SP data have been widely used in assessing new transport policies and transport related plans. However, one of criticisms of using SP is that respondents may show different reaction between hypothetical experiments and real life. In order to overcome the problem, combination of SP and RP data has been suggested and the combined methods have been being developed. The purpose of this paper is to suggest a new SP and RP combined method using error component method and to verify the method. The error component method decomposes IID extreme value error into non-IID error component(s) and an IID error component. The method estimates both of component parameters and utility parameters in order to obtain relative variance of SP data and RP data. The artificial SP and RP data was created by using simulation and used for the analysis, and the estimation results of the error component method were compared with those of existing SP and RP combined methods. The results show that regardless of data size, the parameters of the error component method models are similar to those assumed parameters much more than those of the existing SP and RP combined models, indicating usefulness of the error component method. Also the values of time for error component method are more similar to those assumed values than those of the existing combined models. Therefore, we can conclude that the error component method is useful in combining SP and RP data and more efficient than the existing methods.

• Smart Structures and Systems
• /
• v.14 no.5
• /
• pp.943-960
• /
• 2014

A visually servoed paired structured light system (ViSP) was recently proposed as a novel estimation method of the 6-DOF (Degree-Of-Freedom) relative displacement in civil structures. In order to apply the ViSP to massive structures, multiple ViSP modules should be installed in a cascaded manner. In this configuration, the estimation errors are propagated through the ViSP modules. In order to resolve this problem, a displacement estimation error back-propagation (DEEP) method was proposed. However, the DEEP method has some disadvantages: the displacement range of each ViSP module must be constrained and displacement errors are corrected sequentially, and thus the entire estimation errors are not considered concurrently. To address this problem, a pose-graph optimized displacement estimation (PODE) method is proposed in this paper. The PODE method is based on a graph-based optimization technique that considers entire errors at the same time. Moreover, this method does not require any constraints on the movement of the ViSP modules. Simulations and experiments are conducted to validate the performance of the proposed method. The results show that the PODE method reduces the propagation errors in comparison with a previous work.

• Journal of Korean Academy of Nursing
• /
• v.33 no.6
• /
• pp.753-761
• /
• 2003

Purpose: The study was done to examine the effects of San- Yin-Jiao(SP6) acupressure treatment on subjective labor pain, length of delivery time in women during labor. Method: The study design was a randomized controlled clinical trial study using a double-blinded method. Data were collected using a structured questionnaire, a subjective labor pain scale and measurement of delivery time. The experimental group(n=29) was received SP6 acupressure and control group(n=29), SP6 touch for the duration of each uterine contraction, during 30 minutes after 3cm dilatation of cervical os. Result: The subjective labor pain scores was significantly different between the two groups(p=0.042). The total length of delivery time in the group which had the SP6 acupressure was shorter than SP6 touch group (p=0.036). Conclusion: These findings showed that SP6 acupressure was effective related to labor pain, length of time for delivery. SP6 acupressure during labor could be applied as an effective nursing treatment.

• Korean Journal of Environmental Biology
• /
• v.21 no.2
• /
• pp.216-221
• /
• 2003

Various physico-chemical and biological methods have been used to remove. cyanobacteria which causes blooms and releases toxin. The purpose of the following experiment is aimed finding out which cyanobacteria are affected by $_L-lysine $ and what concentration of$_L-lysine $ inhibits cyanobacteria. The 20 samples of Microcystis sp. have been tested. To prove the growth inhibition on Microcystis sp., double-layered agar method and microplate method have been used. When the concentration of $_L-lysine $ is as heavy as 100 ${\mu}g\; ml^{-1}$~300 ${\mu}g\; ml^{-1}$, some Microcystis sp. have made halo zone. Some Microcystis sp. have shown so high activity as to be inhibited in their growth by the $_{L}$-lysine of concentration 10 ${\mu}g\; ml^{-1}$ with microplate method. These activities are various in accordance with every species. In additions, the microplate method has been proven to be an easy way which examine the lytic activity on the species of algae.e.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.87-91
• /
• 2001

The a-C:H films have been grown on the glass substrate by PECVD method, where plasma was generated with a 60 Hz line power source. The carbonization is checked from peak intensities of D($sp^3$) and G($sp^2$) peaks in Raman spectra and is analyzed using the Gaussian convolution method of spectrum. Both the bonding strength of C-H and the ratio of $sp^3$ to $sp^2$ in bonding are found to be slightly dependent of partial pressure of $C_2H_2$.

• The Korean Journal of Cytopathology
• /
• v.18 no.2
• /
• pp.143-152
• /
• 2007

Sono-guided fine needle aspiration (FNA) of the thyroid is widely used, but the aspirated samples are typically not well preserved and low cellularity makes diagnosis difficult in many cases. The object of the current study is to evaluate the adequacy and diagnostic accuracy of the use of $SurePath^{TM}$ liquid-based cytology (SP-LBC) in the sonoguided fine needle aspiration of the thyroid nodule and to compare its use with that of the use of a conventional smear (CS). A total of 172 sono-guided FNAs of thyroid nodules from April to June, 2006 were prepared by the use of the split method with either SP-LBC or CS; the samples were stained with the use of hematoxylin-eosin (H&E) and Papanicolaou (Pap) stains. A cyto-histological correlation was performed in 69 (30 SP and 39 CS) cases that had been histologically confirmed. The rate of producing unsatisfactory slides by the use of the SP-LBC method (9.3%) was less than that of the use of the CS method (20.9%). The diagnostic accuracy of the SP method (93.3%) was better than that of the CS method (85.3%). The sensitivity and specificity of the SP method (94.4% and 92.3%) was better than that of the CS method (83.3% and 70%), respectively (p < 0.05). The CS of sono-guided aspirated specimens had some unavoidable limitations related to inadequate sampling such as a bloody background, low cellularity and an indication that some clinicians smeared many useless slides (averaging four to ten slides), and that most slides showed only blood that included few follicular cells. The SP method resulted in more thinly smeared slides and showed cleaner background and greater cellularity than the use of the CS method. Each follicular cell shows superior nuclear detail, and more distinct cytoplasmic features than with the use of the CS method. SP-LBC appears to be an easy, highly accurate, and reliable cytological method for employ for a diagnostic approach of thyroid disease and thyroid nodules. The SP-LBC method is a suitable alternative to the CS method to overcome diagnostic difficulties.

• Women's Health Nursing
• /
• v.9 no.2
• /
• pp.138-151
• /
• 2003

Purpose: In the study effects of San-Yin-Jiao (SP6) acupressure on anxiety and pulse during labor, and on neonatal status were examined. Method: The design was a randomized controlled clinical trial with a double-blind method. Data were collected before (pre) and after (post) treatment using structured questionnaire, anxiety scale, pulse rate, umbilical vein pH and Apgar scores. The experimental group received SP6 acupressure for the duration of each uterine contraction over a period of 30 minutes, but the control group received SP6 touch. Results: The anxiety scores between the two groups increased, but the increase was less in the SP6 acupressure group and the difference was statistically significant (p=0.019). Maternal pulse rate was not significantly different immediately after treatment (p=0.711), at 30 and at 60 minutes (p=0.140 ; p=0.108), but while the SP6 acupressure group had a stable pulse, the SP6 touch group showed an increased rate. There was no significant difference between the two groups for umbilical vein pH (p=0.124), and neonatal Apgar score at one and five minutes (p=0.387 ; p=0.979). Conclusion: These findings strengthen the belief that SP-6 acupressure can be used to relieve anxiety during labor with no side effects to either mother or baby.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.105-110
• /
• 2000

The Micromechanics test is new test method which uses comparatively smaller specimen than that required in conventional material tests. There are several methods, such as small-specimen creep test, the continuous indentation test, and small punch(SP) test. Among them, the small punch(SP) test method has been applied to many evaluation fields, such as a ductile-brittle transition temperature, stress corrosion cracking, hydrogen embrittlement, and fracture properties of advanced materials like FGM or MMC. In this study, the small punch(SP) test is performed to evaluate the mechanical properties at high/low temperature from $-196^{\circ}C$ to $650^{\circ}C$ and the material degradation for virgin and aged materials of 9Cr1MoVNb steel which has been recently developed. The ${\Delta}P/{\Delta}{\delta}$ parameter defined a slope in plastic membrane stretching region of SP load-displacement curve decreases according to the increase of specimen temperature, and that of aged materials is higher than the virgin material in all test temperatures. And the material degradation degrees of aged materials with $630^{\circ}C$ -500hrs and $630^{\circ}C$ -1000hrs are $36^{\circ}C$ and $38^{\circ}C$ respectively. These behaviors are good consistent with the results of hardness($H_v$) and maximum displacement(${\delta}_{max}$).

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2010

We were successfully reared young marine ornamental larva fish in a unique process of microalgae blooming culture tank. The marine fish larva was grown and survived in this method. Generally, we called this method as natural mixed culture. Observed planktonic microalgae were 34 species with 19 diatoms (Detonula pumila, Nitzschia sp., Fragilaria oceanica, Chaetoceros curvisetus, Stephanodiscus sp., Chaetoceros decipies, Chaetoceros sp., Thalassiosira rotula, Eucampia zodiacus, Diploneis splendica, Nitzschia longissima, Surirella cuneata, Asterionella glacialis, Nitzschia spp., Chaetoceros debile, Thalassionema nitzschioides, Nitzschia closterium, Skeletonema costatum and Licmophora sp.), 14 flagellates (Euglena, sp., Gonyaulax sp., Pyramimonas sp., Protoperidinium sp., Eutreptia sp., Parapedinella sp., unidentified micrc-flagellate, Gyrodinium sp., Scrippsiell trochoidea, Gymnodinium sanguineum, Chrysochromulina sp., Gymnodinium sp., Prorocentrum triestinum and Micromonas sp.) and 1 ciliate (Mesodinium rubrum) in this culture tank. Dominant microalgae were Chrysochromulina sp. during the larval rearing periods. Blooming condition maintained continuously and stably from 10 to 60 days in this microcosm.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.5
• /
• pp.9-17
• /
• 2014

This paper reported the use of real-time polymerase chain reaction (PCR), denaturing gradient gel electrophoresis (DGGE), and the culture-based method in the intrinsic bioremediation study at a petroleum contaminated site. The study showed that phenol hydroxylase gene was detected in groundwater contaminated with benzene, toluene, ethylbenzene, xylene isomers (BTEX) and methyl tert-butyl ether (MTBE). This indicated that intrinsic bioremediation occurred at the site. DGGE analyses revealed that the petroleum-hydrocarbon plume caused the variation in microbial communities. MTBE degraders including Pseudomonas sp. NKNU01, Bacillus sp. NKNU01, Klebsiella sp. NKNU01, Enterobacter sp. NKNU01, and Enterobacter sp. NKNU02 were isolated from the contaminated groundwater using the cultured-based method. Among these five strains, Enterobacter sp. NKNU02 is the most effective stain at degrading MTBE without the addition of pentane. The MTBE biodegradation experiment indicated that the isolated bacteria were affected by propane. Biodegradation of MTBE was decreased but not totally inhibited in the mixtures of BTEX. Enterobacter sp. NKNU02 degraded about 60% of MTBE in the bioreactor study. Tert-butyl alcohol (TBA), acetic acid, 2-propanol, and propenoic acid were detected using gas chromatography/mass spectrometry during MTBE degraded by the rest cells of Enterobacter sp. NKNU02. The effectiveness of bioremediation of MTBE was assessed for potential field-scale application.