• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.3
• /
• pp.237-244
• /
• 2023

A signal generation simulator is an economical and useful solution in Global Navigation Satellite System (GNSS) receiver design and testing. A software-defined radio approach is widely used both in receivers and simulators, and its flexible structure to adopt to new signals is ideally suited to the testing of a receiver and signal processing algorithm in the signal design phase of a new satellite-based navigation system before the deployment of satellites in space. The generation of highly accurate delayed sampled codes is essential for generating signals in the simulator, where its sampling rate should be chosen to satisfy constraints such as Nyquist criteria and integer and non-commensurate properties in order not to cause any distortion of original signals. A high sampling rate increases the accuracy of code delay, but decreases the computational efficiency as well, and vice versa. Therefore, the selected sampling rate should be as low as possible while maintaining a certain level of code delay accuracy. This paper presents the lower limits of the sampling rate for GNSS signal generation simulators. In the simulation, two distinct code generation methods depending on the sampling position are evaluated in terms of accuracy versus computational efficiency to show the lower limit of the sampling rate for several GNSS signals.

• Journal of Daesoon Thought and the Religions of East Asia
• /
• v.3 no.1
• /
• pp.57-85
• /
• 2023

The politico-economic waives of Western imperialism and colonialism, along with Christianity, affected East Asia's geopolitical landscape in the nineteenth and twentieth centuries. While the Korean people (of the Joseon Dynasty) witnessed the incompetence of Buddhism, Confucianism, and folk religions in maintaining social cohesion with a sense of frustration, the new religious movements (NRMs) emerged to provide altrnative teachings of hope through historical figures like Choe Je-u, Kang Il-sun (or Kang Jeungsan), Na Cheol, and Pak Chungbin. In terms of popularity, colonial Korea (1910-1940) was impressed by the native groups of Cheondogyo (=Donghak), Bocheongyo, and Mugeukdo. Son Byong-hee (1861-1922) was the third leader of the first Korean NRM, but both Cha Gyeong-seok (1880-1936) and Jo Cheol-Je (= Jo Jeongsan) (1895-1958) participated in the post-Jeungsan grassroots movements. How, then, did both of these new religions originate? How did they conceptualise their deities and interpret their teachings differently? What was their policy for national independence? The article explores the socio-religious leaders, historical origin, organizational structure, deities, teaching and doctrines, patriotism, and conflicts of both NRMs in a comparative context. As such, this article argues that they both maintained patriotic characteristics, but that Cha's Bocheongyo community with its ' 60-executives' system (60 bang) failed to manage their internal conflicts effectively. Meanwhile, Jo Cheol-Je of Mugeukdo had the charismatic leadership needed to maintain Mugeukdo, despite being seen as a pseudoreligion under the colonial pressure of Shintoism.

• Journal of Korean Academy of Nursing
• /
• v.54 no.1
• /
• pp.93-105
• /
• 2024

Purpose: The study aimed to understand the semantic structure and nature of the disease experience of kidney transplant recipients with kidney graft failure by applying phenomenological research methods. Methods: Data were collected between February and September 2021 through individual in-depth interviews with 12 kidney transplant recipients with kidney graft failure. Colaizzi's phenomenological analysis was used to analyze the meaning of the participants' illness experiences. Results: 5 theme clusters and 15 themes were derived. The five theme clusters are as follows: (1) First transplant giving me a second life; (2) Body and mind becoming sick again; (3) Waiting for a re-transplant with hope and worry; (4) Life supported by gratefulness; (5) Having control over my own life. Conclusion: This study shows that kidney transplant recipients with kidney graft failure experience physical and psychological difficulties during the long disease period and require help from many people, including family members, friends, colleagues, and health care providers, to overcome their difficulties.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.693-699
• /
• 2024

The main cause of scattering dust generated by transportation equipment such as automobiles was largely due to exhaust gas from internal combustion engines in the past, but it was generally recognized that non-exhaust causes such as abrasion of the tires or brake pads were low. Accordingly, scattering dust generated by exhaust gas has consistently existed in many studies, such as technological progress and related regulations, but research on non-exhaust is relatively insignificant, and the need for research on scattering dust generated by non-exhaust is emerging. In this study, a dust collector that can be easily mounted on a caliper to collect scattering dust generated by pad wear during the brake operation of an automobile was manufactured. In this study, we developed a dust collector that is easy to mount on calipers to collect scattering dust caused by pad wear during brake operation of automobiles. According to the installation of the manufactured dust collector, the performance of scattering dust by brake operation and the temperature change characteristics of calipers according to the structure of the dust collector were evaluated.

• Korean Journal of Materials Research
• /
• v.34 no.4
• /
• pp.215-222
• /
• 2024

Because collagen is inherently piezoelectric, research is being actively conducted to utilize it to harvest energy. In this study, a collagen solution was prepared using edible low-molecular-weight peptide collagen powder, and collagen films were fabricated using a dip coating method. The collagen films prepared by dip coating showed a smooth surface without defects such as pinholes or cracks. Dehydrothermal treatment of the collagen films was performed to induce a stable molecular structure through cross-linking. The collagen film subjected to dehydrothermal treatment at 110 ℃ for 24 h showed a thickness reduction rate of 19 %. Analysis of the collagen films showed that the crystallinity of the collagen film improved by about 7.9 % after dehydrothermal treatment. A collagen film-based piezoelectric nanogenerator showed output characteristics of approximately 13.7 V and 1.4 ㎂ in a pressure test of 120 N. The generator showed a maximum power density of about 2.91 mW/m² and an output voltage of about 8~19 V during various human body movements such as finger tapping. The collagen film-based piezoelectric generator showed improved output performance with improved crystallinity and piezoelectricity after dehydrothermal treatment.

• Journal of Wind Energy
• /
• v.15 no.1
• /
• pp.82-90
• /
• 2024

Bio-fouling has positive aspects that are used as a fish resource, but there are also negative aspects such as corrosion of the surface of the support structure, aesthetics and work safety problems. A specimen was produced using a polyurea material with excellent anti-fouling and methodology, and contact angle, high water pressure, adhesion, and real sea area tests were performed. As a result of measuring the contact angle of the specimen with a 10 cm x 10 cm area of polyurea, There was found to be an average of 124.4 ° at nine points. No surface damage was found even above 5 Mpa when high water pressure was sprayed, and adhesive strength of 300LSE adhesives was confirmed between 22.84 and 23.04 Mpa with an adhesion test. During the 6-month real sea area test, it was confirmed that about 17.24 % of the polyurea film was less generated than the comparison group.

• Journal of Plant Biotechnology
• /
• v.50
• /
• pp.232-238
• /
• 2023

Histone deacetylases (HDACs) play a pivotal role in epigenetic regulation, affecting the structure of chromatin and gene expression across different stages of plant development and in response to environmental stresses. Although the role of HDACs in Arabidopsis and rice has been focused on in extensive research, the role of the HDAC gene family in various medicinal plants remains unclear. In the genome of the balloon flower (Platycodon grandiflorus), we identified 10 putative P. grandiflorus HDAC (PlgHDAC) proteins, which were classified into the three families (RPD3/HDA1, SIR2, and HD2 HDAC families) based on their domain compositions. These HDACs were predicted to be localized in various cellular compartments, indicating that they have diverse functions. In addition, the tissue-specific expression profiles of PlgHDACs differed across different plant tissues, indicating that they are involved in various developmental processes. Furthermore, the expression levels of all PlgHDACs were upregulated in leaves after waterlogging treatment, implying their potential role in coping with waterlogging-induced stress. Overall, our findings provide a comprehensive foundation for further research into the epigenetic regulation of PlgHDACs, and particularly, on their functions in response to environmental stresses such as waterlogging. Understanding the roles of these HDACs in the development and stress responses of balloon flower could have significant implications for improving crop yield and the quality of this important medicinal plant.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.26-32
• /
• 2024

Recently, various video resolution formats have emerged, and digital devices have built in dedicated scaler chips to support them by enlarging or reducing the resolution of input videos. Therefore, the performance and hardware size of scaler chips are important. In this paper, the combinatorial interpolation scaler algorithm proposed by Han is used to design the hardware using the line memory structure with dual-clock proposed by Han and Jung. The proposed hardware is capable of real-time processing in QHD environments, designed using Verilog, and validated using Xilinx's Vivado 2023.1. We also verify the performance of Han's proposed algorithm with a quantitative numerical evaluation of the proposed hardware.

• Journal of Applied Biological Chemistry
• /
• v.66
• /
• pp.1-6
• /
• 2023

Dendranthema zawadskii is a one of the popular plants as native in South Korea. In this study, linarin was isolated and purified using silica-gel, Diaion, and Sephadex LH-20 from the aerial parts of D. zawadskii. The chemical structure was completely identified through spectroscopic data including 1D, 2D nucleic magnetic resonance, and HRFABMS. Furthermore, linarin inhibited the bacterial neuraminidase (BNA) activity with 13.5 μM of IC₅₀ dose-dependently. Through the enzyme kinetic experiments, linarin as BNA inhibitor exhibited a typical noncompetitive inhibition mode which K_m was contestant and V_max decreased as the concentration of the inhibitor increased. It was further identified that the inhibition constant was 16.0 μM. Linarin was the most abundance metabolite in the aerial part of D. zawadskii extract by UHPLC-TOF/MS analysis. Therefore, D. zawadskii and its main component are expected that it can be effectively used for the infection and inflammation caused by bacteria.

• Journal of Microbiology and Biotechnology
• /
• v.34 no.5
• /
• pp.1119-1125
• /
• 2024

Phytase increases the availability of phosphate and trace elements by hydrolyzing the phosphomonoester bond in phytate present in animal feed. It is also an important enzyme from an environmental perspective because it not only promotes the growth of livestocks but also prevents phosphorus contamination released into the environment. Here we present a novel phytase derived from Turicimonas muris, TmPhy, which has distinctive structure and properties compared to other previously known phytases. TmPhy gene expressed in the Pichia system was confirmed to be 41 kDa in size and was used in purified form to evaluate optimal conditions for maximum activity. TmPhy has a dual optimum pH at pH3 and pH6.8 and exhibited the highest activity at 70℃. However, the heat tolerance of the wildtype was not satisfactory for feed application. Therefore, random mutation, disulfide bond introduction, and N-terminal mutation were performed to improve the thermostability of the TmPhy. Random mutation resulted in TmPhyM with about 45% improvement in stability at 60℃. Through further improvements, a total of three mutants were screened and their heat tolerance was evaluated. As a result, we obtained TmPhyMD1 with 46.5% residual activity, TmPhyMD2 with 74.1%, and TmPhyMD3 with 66.8% at 80℃ heat treatment without significant loss of or with increased activity.