• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.152-153
• /
• 2012

Ion sensitive field effect transistor (ISFET)는 전해질 속 각종 이온농도를 측정하는 반도체 이온 센서이다. 이 소자의 기본 구조는 metal oxide semiconductor field effect transistor (MOSFET)에서 고안되었으며 게이트 컨택 부분이 기준전극과 전해질로 대체되어진 구조를 가지고 있다 [1]. ISFET는 기존의 반도체 CMOS 공정과 호환이 가능하고 제작이 용이할 뿐만 아니라, pH용액에 대한 빠른 반응 속도, 비표지 방식의 생체물질 감지능력, 낮은 단가 및 소자의 집적이 용이하다는 장점을 가지고 있다. ISFET pH센서의 감지특성에 결정하는 요소 중 가장 중요한 것은 소자의 감지막이라고 할 수 있다. 감지막은 감지 대상 물질과 물리적으로 직접 접촉되는 부분으로서 일반적으로 기계적/화학적 강도가 우수한 실리콘 산화막(SiO2)이 많이 사용되어져 왔다. 최근에는 기존의 SiO2 보다 성능이 향상된 감지막을 개발하기 위하여 Al2O3, HfO2, ZrO2, 그리고 Ta2O5와 같은 고유전 상수(high-k)를 가지는 물질들을 EIS 센서의 감지막으로 이용하는 연구가 활발하게 진행되고 있다. 하지만 지속적인 high-k 물질들에 대한 연구에도 불구하고 각각의 물질이 갖는 한계점이 드러났다. 본 연구에서는 SOI기판에서 SiO2 /HfO2 (OH), SiO2/Al2O3 (OA) 이단 적층 그리고 SiO2/HfO2/Al2O3 (OHA) 삼단적층 감지막을 갖는 ISFET을 제작하고 각 감지막의 특성을 평가하였다. 평가된 특성의 결과가 아래의 표1에 요약되었다. 그 결과, 각 high-k 물질이 갖는 한계점을 극복하기 위하여 제안된 OHA감지막은 기존에 OH, OA가 갖는 장점을 취하면서 단점을 최소화 시키는 최적화된 감지막의 감지특성을 보였다.

• Journal of Sensor Science and Technology
• /
• v.19 no.1
• /
• pp.31-35
• /
• 2010

High temperature micro pressure sensors were fabricated by using polycrystalline 3C-SiC piezoresistors grown on oxidized SOI substrates by APCVD. These have been made by bulk micromachining under $1{\times}1mm^2$ diaphragm and Si membrane thickness of $20{\mu}m$. The pressure sensitivity of implemented pressure sensors was 0.1 mV/$V{\cdot}bar$. The nonlinearity and the hysteresis of sensors were ${\pm}0.44%{\cdot}FS$ and $0.61%{\cdot}FS$. In the temperature range of $25^{\circ}C{\sim}400^{\circ}C$ with 5 bar FS, TCS (temperature coefficient of sensitivity), TCR (temperature coefficient of resistance), and TCGF (temperature coefficient of gauge factor) of the sensor were -1867 ppm/$^{\circ}C$, -792 ppm/$^{\circ}C$, and -1042 ppm/$^{\circ}C$, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.387-388
• /
• 2008

High temperature micro pressure sensors were fabricated by polycrystalline (poly) 3C-SiC piezoresistors formed by oxidized SOI substrates with APCVD. These have been designed by bulk micromachining below $1{\times}1mm^2$ diaphragm and Si membrane $20{\mu}m$ thick. The pressure sensitivity of fabricated pressure sensor was 0.1 mV/Vbar. The non-linearity of sensor was ${\pm}0.44%$ FS and the hysteresis was 0.61% FS.TCS of pressure sensor was -1867 ppm/$^{\circ}C$, its TCR was -792 ppm/$^{\circ}C$, and TCGF to 5 bar was -1042 ppm/$^{\circ}C$ from 25 to $400^{\circ}C$.

• Journal of Sensor Science and Technology
• /
• v.22 no.5
• /
• pp.369-373
• /
• 2013

In this paper, we developed contact type temperature sensor with single crystal silicon strip thermopile. This sensor consists of 15 p-type single crystal silicon strips, 17 n-types and contact electrodes on silicon dioxide silicon membrane. The result of electromotive force measuring showed very good characteristic as $15.18mV/^{\circ}C$ when temperature difference between the two ends of the thermopile occurs by applying thermal contact on the thermopile which was fabricated with silicon strip of $200{\mu}m$ length, $20{\mu}m$ width, $1{\mu}m$ thickness.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.187-196
• /
• 2005

MEMS devices such as a vibratory gyroscope often suffer from a lower yield rate due to fabrication errors and the external stress. In the decoupled vibratory gyroscope, the main factor that determines the yield rate is the frequency difference between the sensing and driving modes. The gyroscope, fabricated with SOI (Silicon-On-Insulator) wafer and packaged using the anodic bonding, has a large wafer bowing caused by thermal expansion mismatch as well as non-uniform surfaces of the structures caused by the notching effect. These effects result in large distribution in the frequency difference, and thereby a lower yield rate. To improve the yield rate we propose a packaged SiOG (Silicon On Glass) technology. It uses a silicon wafer and two glass wafers to minimize the wafer bowing and a metallic membrane to avoid the notching. In the packaged SiOG gyroscope, the notching effect is eliminated and the warpage of the wafer is greatly reduced. Consequently the frequency difference is more uniformly distributed and its variation is greatly improved. Therefore we can achieve a more robust vibratory MEMS gyroscope with a higher yield rate.