• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1358-1363
• /
• 2011

본 연구에서는 GEC, VVVF 전동차 운전실에 취부 되어 있는 Brake Controller 점검방법 개선에 관한 연구를 수행하였다. Brake Controller내의 단동 스냅동작 스위치, 복동 스냅동작 스위치 및 단자대와 연결된 모든 부품을 개별적 점검이 아닌 현 전동차와 동일한 조건에서 전반적인 면밀한 검토 및 분석을 통하여 개선책을 강구하고, 고장을 사전에 발견해 처리함으로써 운행 장애 최소화 및 승객의 안전과 직결된 전동차 안전운행에 기여하고자 본 연구를 시작하였다.

• 한국전산구조공학회논문집
• /
• 제12권3호
• /
• pp.407-415
• /
• 1999

쉘형 구조물의 불안정 현상은 크게 뜀좌굴과 분기좌굴로 분류할 수 있다. 이들은 구조물의 형상특성, 특히 형상 초기불완전에 대해 매우 민감하게 반응한다. 본 연구에서는, 형상 초기불완전을 가진 쉘형 구조물의 불안정 거동을 파악하기 위해 양단이 힌지로 고정된 얕은 정현형 아치의 평형경로를 조사한다. 비선형 방정식을 얻기 위해 Galerkin법을 이용하였으며, 증분형 방정식으로의 변환은 섭동법을 이용하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.276-281
• /
• 2008

Glass-fiber reinforced polyester(GFRP) composite material is a promising alternative to existing construction materials such as steel, concrete and wood. One of passible applications of GFRP composite material is to build temporary bridges by assembling GFRP composite decks. In this paper, we develop a system of temporary arch bridges that can be built by easy assembling of GFRP composite decks. For this purpose, several types of temporary arch bridges are suggested and verified by FE analysis.

• 대한수의학회지
• /
• 제47권3호
• /
• pp.281-283
• /
• 2007

This study was conducted to survey of Ehrlichia (E.) canis and Borrelia (B.) burgdorferi antibodies among clinically healthy German shepherd dogs (116 females and 120 males) using a ELISA kit (SNAP 3Dx; IDEXX Laboratories, USA) in Korea. Whole blood samples are collected from the 236 dogs and are tested to detect E. canis and B. burgdorferi antibodies by using ELISA kit (SNAP 3Dx; IDEXX Laboratories, USA). Confidence interval comparisions revealed that dogs of 4-6 years have higher prevalence with a seropositive result (CI=0.17-0.45) in E. canis than the other age groups but there are no differences among age groups in B. burgdorferi. Also, no differences with a seropositive result were found among different regions in E. canis and B. burgdorferi antibodies. In conclusion, this study was the first large scale survey of canine E. canis and B. burgdorferi antibodies in Korea and provide an useful reference for clinicians.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.235-238
• /
• 2006

For high-speed aircraft and high-speed civil transport planes, certain structural skin components are subjected to very large acoustic loads in an elevated thermal environment. In this study, we used the single-mode Fokker-Panck distribution to predict displacements of isotropic plates subject to thermo-acoustic combined load. The single mode was formulated to predict the nonlinear dynamic responses of postbuckled plates under acoustic random excitation. Acoustic random excitation was used with Gauss distribution. Some important effects of the snap-through motion on the dynamic responses of the postbuckled plates are described.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.164-173
• /
• 2001

The configuration of injection molded part can be classified into primary feature and supplementary feature. Even though supplementary features such as ribs, snap fits and bosses make mold more complicated, which cause the increasement of the mold cost, supplementary features should be attached to primary features because of assembly, reinforcement, moldability and other functional purposes. But it is not easy for novice designers to design them appropriately because of the profound knowledge related to Injection molding. In this paper, the intelligent design tool called ISFD(Intelligent Supplementary Feature Designer) which supplies easy, simple, time and cost-effective design method has been studied and developed. A knowledge-based design system is a new tool which enables the concurrent design and CIM with integrated and balanced design decisions at the initial design stage of injection molding.

• 대한구순구개열학회지
• /
• 제5권1호
• /
• pp.1-9
• /
• 2002

Some children with Cleft Palate have shown a speech disorders after repaired surgical operation. A diagnostic evaluation of speech in children with cleft palates is important in preventing speech disorders. However, standard speech evaluation form for children with cleft palates has not yet developed in Korea. The purpose of this study is to make the standard speech evaluation form for children with cleft palates. Thirty control children group and ten children with cleft palate participated in this experiment. The test words are composed of meaningless two syllabic words containing the three different types of korean stop consonants,

• 한국컴퓨터산업교육학회:학술대회논문집
• /
• 한국컴퓨터산업교육학회 2003년도 제4회 종합학술대회 논문집
• /
• pp.71-74
• /
• 2003

A vertical trench electrode type EST has been proposed in this paper. The proposed device considerably improve the snap-back effect which leads to a lot of problem of device applications. In this paper, the vertical dual gate Emitter Switched Thyristor(EST) with trench electrode has been proposed for improving snap-back effect. It is observed that the forward blocking voltage of the proposed device is 800V. The conventional EST of the same size were no more than 633V. Because the proposed device was constructed of trench-type electrode, the electric field moved toward trench-oxide layer, and the punch through breakdown of the proposed EST is occurred at latest.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.420-425
• /
• 2000

The room-temperature shapes of cured unsymmetric composite laminates have out-of-plane warping after autoclave processing. In addition, they exhibit two stable room-temperature configurations due to snap-through phenomena when the side length of laminates exceeds a critical value. The cured shapes of unsymmetric laminates are influenced by many environmental factors. Experiments show that the effect of too-plate cannot be ignored and has significant influence on the cured shape of unsymmetric laminates. In this present study, approximations to the strain fields are used in the expression for the total potential energy and the Rayleigh-Ritz method is applied. The slippage effects resulting from the interaction between the laminates and the tool-plate are considered. By introducing a dimensionless slippage coefficient and correlating the corresponding value with experimental results, the influence of processing parameters is investigated. Modeling is extended to predict curvatures of plate configurations with various aspect ratio.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.357-360
• /
• 2011

In these days, the passenger vehicles usually have equipped various comfort & security systems to appeal to customers. And then, the importance of emotional quality gives added weight to the noise performance of those system devices. Door inside handle system is one of the most popular devices for passenger. This paper shows developing process about the operating sound of door inside handle. We used DFSS process to develop the door inside handle snap back sound and confirmed the improvement.