• Journal of Power Electronics
• /
• v.10 no.6
• /
• pp.733-738
• /
• 2010

This paper deals with a ride-through technique for permanent-magnet synchronous generator (PMSG) wind turbine systems using energy storage systems (ESS). A control strategy which consists of current and power control loops for the energy storage systems is proposed. By increasing the generator speed, some portion of the turbine power can be stored in the system inertia. Therefore, the required energy capacity of the ESS can be decreased, which results in a low-cost system. In addition, the power fluctuations due to wind speed variations can be smoothened by controlling the ESS appropriately. The effectiveness of the proposed method is verified not only by the simulation results for a 2[MW] PMSG wind turbine system, but also by the experiment results for a reduced-scale turbine simulator.

• Steel and Composite Structures
• /
• v.31 no.1
• /
• pp.43-51
• /
• 2019

This paper is concerned with the numerical calculation of mixed-mode stress intensity factors (SIFs) of 2-D isotropic functionally graded materials (FGMs) by the natural element method (more exactly, Petrov-Galerkin NEM). The spatial variation of elastic modulus in non-homogeneous FGMs is reflected into the modified interaction integral ${\tilde{M}}^{(1,2)}$. The local NEM grid near the crack tip is refined, and the directly approximated strain and stress fields by PG-NEM are enhanced and smoothened by the patch recovery technique. Two numerical examples with the exponentially varying elastic modulus are taken to illustrate the proposed method. The mixed-mode SIFs are parametrically computed with respect to the exponent index in the elastic modulus and external loading and the crack angle and compared with the other reported results. It has been justified from the numerical results that the present method successfully and accurately calculates the mixed-mode stress intensity factors of 2-D non-homogeneous functionally graded materials.

• Journal of Embryo Transfer
• /
• v.28 no.3
• /
• pp.251-256
• /
• 2013

The present study was performed to investigate the effect of Hh-Ag1.5, a small-molecule chemical agonist of SMOothened receptor, on the in vitro maturation and development of in vitro fertilized (IVF) embryos in pigs. Oocytes or fertilized embryos were cultured in a maturation or embryo culture medium supplemented with 0 (control), 25, 50 or 100 nM of Hh-Ag1.5, respectively. Although the maturation rate were not different among treatment groups, the blastocyst formation rate in the group treated with 25 nM Hh-Ag1.5 was significantly increased compared to other groups (P<0.05). While the highest dose of Hh-Ag1.5 (100 nM) did negatively affect to the embryo development and cell number in blastocysts compared to other groups (P<0.05), the apoptotic cell index in blastocysts was significantly lower in 25 and 50 nM groups than in control and 100 nM groups (P<0.05). The mRNA expression of the proapoptotic gene Bax and the ratio of Bax/Bcl-XL decreased in among treatment groups compared to control (P<0.05). The embryo quality related genes, Tert and Zfp42, were significantly decreased in 50 and 100 nM groups compared with control and 25 nM groups (P<0.05). In conclusion, the addition of 25 nM Hh-Ag1.5 to in vitro maturation and culture medium can enhance the developmental potential as well as quality of IVF embryos in pig.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.1
• /
• pp.73-79
• /
• 2018

The primary cilium protrudes from the cell body like a bio-antenna that has many receptors, channels and signaling molecules to sense and response to external stimuli. The external environment such as ultraviolet irradiation, temperature, humidity, gravity and shear stress always influences skin. Skin responds to external stimuli and differentiates by making melanin, collagen and horny layer. Ciliogenesis participates in developmental processes of skin, such as keratinocyte differentiation and hair formation. And it was reported that skin pigmentation was inhibited when ciliogenesis was induced by sonic hedgehog-smoothened-GLI2 signaling. When skin is exposed to ultraviolet irradiation, alpha-melanocyte stimulating hormones (${\alpha}$-MSH) increase melanin synthesis through activation of the cAMP pathway in melanocytes. We observed that ${\alpha}$-MSH and cAMP production inducers inhibited ciliogenesis of melanocytes. Therefore, we thought that regulation of ciliogenesis is potential candidate target for the development of agents to treat undesirable hyperpigmentation of skin. As a result, we found out that an ethanol extract of Glycyrrhiza glabra (EGG) root and 3,4,5-trimethoxy cinnamate thymol ester (TCTE, Melasolv) significantly inhibit melanin synthesis of normal human melanocyte by inducing primary cilium formation. This study proposed new theory to regulate skin pigmentation and cosmetic components for skin whitening.

• Fashion & Textile Research Journal
• /
• v.8 no.2
• /
• pp.239-244
• /
• 2006

For studies of fibrinolytic enzyme strain K-54 was isolated from the Korean traditional food chungkook-jang. Isolated strains K-54 was identified as Bacillus subtilis. The molecular weight of fibrinolytic enzyme from B. subtilis K-54 was 27 kDa. Optimum temperature for fibrinolytic enzyme of B. subtilis K-54 was $50-70^{\circ}C$ and optimum pH for producing the enzyme of this strain was ranging from 8 to 12. Also, it was found out enzyme activity was completely inhibited by 1mM PMSF. The result indicated this enzyme was thermo-stable alkaline serine protease with strong fibrinolytic activity. The wool and silk were treated with protease of B. subtilis K-54. As a result, the property of dyeing of wool fabrics was increased. By the increasing of treatment time became smoothened. But the change of mechanical properties were not changed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.457-458
• /
• 2006

A method for obtaining smooth, jerk bounded feed rate profile in high speed machining has been developed. This study proposes a NURBS interpolator based on adaptive feed rate control with a well developed look ahead algorithm which takes into account the machining dynamics as well. Limitation of jerk and proportional torque rate result in smoothened loads on the machine which effectively reduces excitation of the resonant frequencies of the machine. It is found that the values of the feed rate of the down stream sharp corner have profound effect on the feed rate of the upstream sharp corners. By using a windowing scheme the feed rate profile obtained after look ahead method is re-interpolated to reduce the jerk related problems. This is compared with the adaptive NURBS interpolator to show the effectiveness of the proposed method. Simulation results indicate that the consideration of 'ripple effect' is important in avoiding jerk and thereby increasing the machining accuracy.

• Nuclear Engineering and Technology
• /
• v.34 no.6
• /
• pp.553-565
• /
• 2002

In this paper, the robust control scheme with the improved control performance within the boundary layer is proposed. In the control scheme, the robust controller based on the traditional variable structure control method is modified to have the adaptation within the boundary layer. From this controller, the width of the boundary layer where the robust control input is smoothened out can be given by an appropriate value. But the improved control performance within the boundary layer can be achieved without the so-called control chattering because the role of adaptive control is to compensate for the uncovered portions of the robust control occurred from the continuous approximation within the boundary layer Simulation tests for circular navigation of an underwater wall-ranging robot developed for inspection of wall surfaces in the research reactor, TRIGA MARK III, confirm the performance improvement. Notational Conventions Vectors are written in boldface roman lower-case letters, e.g., x and y. Matrices are written in upper-case roman letters, e.g., G and B. And ∥.∥ means the Euclidean norm.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.2
• /
• pp.130-134
• /
• 2016

The anodization of ADC12 aluminum alloy was investigated in the metal anionic acid media. Anodic oxide films containing foreign elements were formed on ADC12 Al alloy by anodization in the anion complex solution. Furthermore, the rough surface and cracks were considerably smoothened by the deposit of metal anions. When the size of metal anion was small, relatively large amount of metal anions was loaded in anodic films. Existence of $MoO_3$, $TiO_2$ and MgO was confirmed by XPS. According to the results of Tafel analysis, Mo oxide represented the most noble anti-corrosion potential due to $MoS_2$ formation. Corrosion current densities were generally higher than that of pristine anodic oxide without anion complexes.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.1
• /
• pp.15-17
• /
• 2019

We present terahertz optical properties of $GdBa_2Cu_3O_{7-x}$ (GdBCO) superconducting thin films. GdBCO films with a thickness of about 105 nm were grown on a $LaAlO_3$ (LAO) single crystal substrate using a conventional pulsed laser deposition (PLD) technique. Using an Ar ion milling system, the thickness of the GdBCO film was reduced to 58 nm, and its surface was also smoothened. Terahertz (THz) transmission spectra through two different GdBCO films are measured over the range between 0.2 and 1.5 THz using THz time domain spectroscopy. Interestingly, the THz transmission of the thinner GdBCO film has been increased to six times larger than that of the thicker one, while the thinner film is still maintaining its superconducting property at below 90 K.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.19 no.2
• /
• pp.146-154
• /
• 2023

In nuclear power plants, ultrasonic test for pipe wall thickness measurement is used during periodic inspections to prevent pipe rupture due to pipe wall thinning. However, when measuring pipe wall thickness using ultrasonic test, a significant amount of measurement error occurs due to the on-site conditions of the nuclear power plant. If the maximum pipe wall thinning rate is decided by the measured pipe wall thickness containing a significant error, the pipe wall thinning rate data have significant uncertainty and systematic overestimation. This study proposes preprocessing of pipe wall thinning measurement data using support vector machine regression algorithm. By using support vector machine, pipe wall thinning measurement data can be smoothened and accordingly uncertainty and systematic overestimation of the estimated pipe wall thinning rate data can be reduced.