• Journal of Pharmaceutical Investigation
• /
• v.16 no.1
• /
• pp.31-35
• /
• 1986

Effect of ethanol on the absorption rate, blood level and bioavailability of sulfamethazine (SM) in rats was determined. Absorption rate of SM was determined both by the in vitro and in situ experiment. In vitro, absorption rate of SM in rat small intestine was increased by 0.3, 1.0 and 3.0% ethanol. In situ, absorption rate of SM was increased by 0.3 and 1.0% ethanol but not by 3.0% ethanol. After oral administration, blood level of SM was elevated and relative bioavailability was significantly increased to 114.8% at the dose of 0.6g/kg ethanol but not significantly at the dose of 3.0g/kg ethanol. The time for attainment of peak blood level was changed from 2.5 to 1.5hr. Ethanol enhanced absorption rate constant of SM significantly and reduced elimination rate constant of SM administered orally at the dose of 0.6g/kg ethanol.

• The Journal of Natural Sciences
• /
• v.11 no.1
• /
• pp.33-39
• /
• 1999

Electrochemical behaviors of $Sm^3+$-ARS complexes has been investigated by d.c.polarography, differential pulse polarography and cyclic voltammetry. $Sm^3+$forms 1 : 3 adsorptive complexes with ARS.The reduction potential of complex wave $(P_2)$ shifted more negatively than the ligand wave $(P_1)$. The linear calibration curves of decreasing $P_1$ and increasing $P_2$ is obtained when $Sm^3+$ concentration varies from TEX>$2{\times}10^{-6}$ M to $3.2{\times}10^{-5}$ M.

• Microbiology and Biotechnology Letters
• /
• v.18 no.3
• /
• pp.296-300
• /
• 1990

For interspecific portoplast fusion, Brevibacterium flauum lOAHR (Rifr axg his) and Corynebacterium glutamicum 11TS ($Sm-r$ trp) were induced by UV and NTG treatment. The protoplast fusion frequency between E. flavum XOAHR and C. glutamicum llTS was $3.7\times 10^{-6}$ with the lysozyme treatment (300 P $\mu g$ml) for 18 hrs. Genotypes of recombinants were analized as FMM ($Rif^r\; Sm^r$), FA (Rift $Sm^r$ arg), FH ($Rif^r\; Sm^r$ his), FT ($Rif^r\; Sm^r$ trp), FAH ($Rif^r\; Sm^r$ arg trp), FAT ($Rif^r\; Sm^r$ arg trp), and FAHT ($Rif^r\; Sm^r$ arg his trp). FAH 1 produced 12 fold of glutamate production compared to parental type, E. flauum 10AHR. In glutamine productivity, it produced 2.6 fold to parental type, C. glutamicum 11TS. Production of glutamate or glutamine by recombinants was involved in the specific activities of glutamate dehydrogenase (GDH) and glutamine synthetase (GS), respectively.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.858-863
• /
• 1995

The nitrogenation process and magnetic properties of $Sm_{2}Fe_{17}N_{x}\;(0{\leq}x{\leq}3)$ were investigated. During the initial nitrogenation process, the nitrogen content had linear relation with the square root of nitrogenation time, and the activation energy for the process was calculated to be 102.4 kJ/mol. The magnetic properties of $Sm_{2}Fe_{17}N_{x}$ were strongly dependent on the nitrogen content and the composition having $Sm_{2}Fe_{17}N_{2.8}$ showed optimum magnetic properties with a Curie temperature of 450 oC. The intrinsic magnetic properties of the nitride at room temperature were $M_{s}=1147\;emu/cm^{3},\;K_{1}=4.6{\times}10^{7}erg/cm^{3},\;K_{2}=6.0{\times}10^{7}erg/cm^{3}\;and\;H_{A}=290\;kOe$, respectively.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.6
• /
• pp.643-650
• /
• 2019

The purpose of this study was to investigate the quality of dehulled soybean (DHSB), and the rapid preparation possibility of soybean milk with DHSB (SM-DHSB), and then the quality of SM-DHSB. In DHSB, the moisture content decreased, the crude protein, crude fat, minerals, and carbohydrate contents increased, and the isoflavone (daidzein, genistein and glycitein) content was similar to that of soybean (SB). The water absorption rate of DHSB for soybean milk preparation was higher than that of SB. In the results of SM-DHSB and soybean milk (SM) qualities, the crude protein content, total solid content, and the viscosity of SM-DHSB were higher, the yield and the proximate composition (except crude protein) were similar, and the Biji production rate, and total dietary fiber content of SM-DHSB were lower compared to the SM. In terms of the isoflavone contents of SM-DHSB, daidzein and genistein content were similar, and glycitein content was lower compared with the SM. Consequently, these results suggest the possible use of DHSB for rapid SM-DHSB preparation, because the soaking time was decreased by the high water absorption rate of DHSB in the SM preparation, and the quality of SM-DHSB improved compared to those of the SM.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.1040-1044
• /
• 1995

Magnetic garnet films of (YSmLuCa)$_3$(FeGe)$\_$5/O$\_$12/ have been grown by the liquid phase eqitaxy method on the substrate of non-magnetic garnet Gd$_3$Ga$\_$5/O$\_$12/. The variation of Sm ion concentration were varied 0.3, 0.4, 0.6, mole/formula unit respectively. The magnetic properties of the samples for the bubble magnetic materials, such as, line width ΔH of ferromagnetic resonance (FMR), magnetic saturation induction 4$\pi$Ms, wall mobility u$\_$w/ uniaxial magnetic anisotropy energy Ku, were measured and discussed the relations between these properties. The line width ΔH decreases with increasing 4$\pi$Ms, and with decreasing Sm concentration. The anisotropy energy Ku increases not only with increasing Sm ion concentration, but also increasing 4$\pi$Ms. The value of wall mobility u$\_$w/ increase with increasing 4$\pi$Ms and decreases with increasing Sm concentration. We define a physical constant Eι from the fact that the product of 4$\pi$Ms and ΔH is constant with dimension of energy density. The Eι is dependent only on Sm concentration.density. The Eι is dependent only on Sm concentration.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.5
• /
• pp.393-399
• /
• 2020

A series of phosphors, SrWO₄:5 mol% Dy³⁺, SrWO₄:5 mol% Sm³⁺, and SrWO₄:5 mol% Dy³⁺:x Sm³⁺ (x＝1~15 mol%), were prepared using a facile co-precipitation. The crystal structure, morphology, photoluminescence properties, and application in anti-counterfeiting fields were investigated. The crystalline structures of the prepared phosphors were found to be tetragonal systems with the dominant peak occurring at the (112) plane. The excitation spectra of the Dy³⁺ singly-doped SrWO₄ phosphors were composed of an intense charge-transfer band centered at 246 nm in the range of 210~270 nm and two weak peaks at 351 nm and 387 nm due to the ⁶H_15/2→⁶P_7/2 and ⁶H_15/2→⁴I_13/2 transitions of Dy³⁺ ions, respectively. The wavelength of 246 nm was optimum for exciting the luminescence of Dy³⁺ and Sm³⁺ co-doped SrWO₄ phosphors. The emission spectra consisted of two intense blue and yellow emission bands at 480 nm and 573 nm corresponding to the ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transitions of Dy³⁺, and two strong emission peaks at 599 nm and 643 nm originating from the ⁴G_5/2→⁶H_7/2 and ⁴G_5/2→⁶H_9/2 transitions of Sm³⁺, respectively. As the concentration of Sm³⁺ ions increased, the emission intensities of Dy³⁺ rapidly decreased, while the emission intensities of Sm³⁺ gradually increased. These results suggest that the color of the emission light can be tuned from yellow to white by changing the concentration of Sm³⁺ ions at a fixed 5 mol% Dy³⁺. Furthermore, the fluorescent security inks were synthesized for use in anti-counterfeiting applications.

• Korean Journal of Plant Taxonomy
• /
• v.42 no.4
• /
• pp.307-315
• /
• 2012

Somatic chromosome numbers for 10 taxa and karyotypes analysis for 6 taxa of Korean Vicia were investigated. Somatic chromosome numbers of treated taxa were 2n = 12, 14 or 24 and therefore they proved to be diploid or tetraploid with basic chromosome numbers of x = 6 or 7. The chromosome number of V. hirticalycina (2n = 2x = 12) was reported for the first time in this study. The chromosome numbers of nine taxa were the same as in previous studies; V. angustifolia (2n = 2x = 12), V. cracca (2n = 4x = 24), V. hirsuta (2n = 2x = 14), V. tetrasperma (2n = 2x = 14 + 2B), V. amurensis (2n = 2x = 12), V. chosenensis (2n = 2x = 12, 12 + 2B), V. unijuga (2n = 4x = 24), V. unijuga f. minor (2n = 4x = 24), V. venosa var. cuspidata (2n = 4x = 24). The karyotypes of V. cracca, V. amurensis, V. hirticalycina, V. unijuga, V. unijuga f. minor, V. venosa var. cuspidata were observed as 2 m + 8 sm + 2 st, 2 m + 2 sm + 2 st, 3 m + 1 sm + 2 st, 4 m + 6 sm + 2 st, 4 m + 6 sm + 2 st, 4 m + 8 sm, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.3
• /
• pp.212-215
• /
• 1997

Parent isolates and $first-generation(F_1)$ progenies from single-sporangium of Phytophthora infestans were investigated for the acqusition of metalaxyl and streptomycin sulfate(SM) resistance. The parent isolates, KM10, U6, CDB6 showed resistance to metalaxyl, and F817, DNC303, DN107 to SM. Especially, the average mycelial growth of $F_1$ progenies of F817, CDB6, JD1 was more than 51% than parent isolates on 25ppm metalaxyl added V-8 juice agar, whereas those of KM10, U6, JD1 were extended more than 51% similar on 200ppm SM treatment. They acquired resistance on the basis of the standard in this experiment. There were positive correlations between parent isolates and $F_1$colonies in resistance. The $F_1$ colonies obtained from parent isolates showing above interinediate resistance on metalaxyl amended agar acquired much resistance.

• Journal of Welding and Joining
• /
• v.17 no.2
• /
• pp.104-111
• /
• 1999

The interfacial microstructure and bond strength were examined for WC-Co/Cu/SM45C steel join using a nickel-plated copper in vacuum at 1323K for 0.6ks∼3.6ks. After bonding, microstructure in bonding interface was observed by OM(Optical Microscopy), SEM(Scanning Electron Microscopy) and EPMA(Eelectron Probe Micro Analyzer). The oil cooling was carried out at 353K, the cooling rate in air and furnace was 22K/s and 4.4K/s. respectively. It was found that dendritic widths increased with the content of cobalt and bonding times at 1323K. As a whole, bond strength values at the same bonding condition decreased in this order: WC-13wt.%Co/SM45Csteel. WC-8wt.%Co/SM45Csteel and WC-4wt.%Co/SM45Csteel. The bond strength of WC-13wt.%Co/S45C steel joint in oil cooling was 273MPa. This value was greatly higher than those of 125MPa in furnace cooling and 93MPa in air cooling at 1323K for 0.6ks. The bond strength values were found to be closely associated with the content of cobalt in WC-Co and cooling rate.