• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.2
• /
• pp.111-122
• /
• 1994

In this study, an algorithm which can be applied to the optimum design of simple steel plate girders was developed, and efficient optimization strategies for the solution of algorithm were found out. The optimum design algorithm consists of 3-levels of optimization. In the first and second levels of optimization, the absolute maximum bending moment and shearing force are extracted and in the third level of optimization, the optimum cross section of steel plate girder is determined. For the optimum design of cross section, the objective function is formulated as the total area of cross section and constraints are derived in consideration of the various stresses and the minimum dimension of flange and web based on the part of steel bridge in the Korea standard code of road bridge. Sequential unconstrained minimization technique using the exterior penalty function method(SUMT-EP), sequential linear programming(SLP) and sequential quadratic programming (SQP) are proved to be efficient and robust strategies for the optimum design of simple plate girder cross section. From the reliable point of view, SLP is the most efficient and robust strategy and SQP is the most efficient one from the viewpoint of converguency and computing time.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.1-11
• /
• 2000

In this paper, optimum design problem of R.C. continuous beam is considered and GUI system is developed for using at the practical design. Objective function lot formulation of optimum design problem is made up of the costs of concrete, reinforcing steel and formwork. Design variables are width, effective depth of the beam and steel ratio and design constraints are considered on the strength, serviceability, durability and geometrical conditions. The optimum design problem is solved by using sequential linear programming(SLP), sequential convex programming(SCP) and compared their effectiveness. Also this paper shows the application at practical design work according to the development of GUI system using visual basic.

• Journal of Communications and Networks
• /
• v.9 no.2
• /
• pp.198-209
• /
• 2007

This paper provides a thorough study on shared segment protection (SSP) for mesh communication networks in the complete routing information scenario, where the integer linear program (ILP) in [1] is extended such that the following two constraints are well addressed: (a) The restoration time constraint for each connection request, and (b) the switching/merging capacity constraint at each node. A novel approach, called SSP algorithm, is developed to reduce the extremely high computation complexity in solving the ILP formulation. Basically, our approach is to derive a good approximation on the parameters in the ILP by referring to the result of solving the corresponding shared path protection (SPP) problem. Thus, the design space can be significantly reduced by eliminating some edges in the graphs. We will show in the simulation that with our approach, the optimality can be achieved in most of the cases. To verify the proposed formulation and investigate the performance impairment in terms of average cost and success rate by the additional two constraints, extensive simulation work has been conducted on three network topologies, in which SPP and shared link protection (SLP) are implemented for comparison. We will demonstrate that the proposed SSP algorithm can effectively and efficiently solve the survivable routing problem with constraints on restoration time and switching/merging capability of each node. The comparison among the three protection types further verifies that SSP can yield significant advantages over SPP and SLP without taking much computation time.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.42-51
• /
• 2017

Due to the high degree of mechanization and the good environmental benefits, the prefabricated buildings are being promoted in China. The construction site layout of the prefabricated buildings has important influence on its safety benefit. However, few scholars have studied the safety problem on it. Firstly, in order to give a follow-up study foreshadowing the characteristics of prefabricated buildings are analyzed, the research assumptions are given and three types of safety buffers are established. And then a mult-objective model for the prefabricated buildings site layout is presented: taking into account the limits of noise, the coverage of the tower crane and the possibility of exceeding boundaries and overlapping, the constraints are and designed established respectively; Based on the improved System Layout Planning (SLP) method, the efficiency\cost\safety interaction matrices among the facilities are also founded for objective function. For the sake of convenience, a hypothetical facility layout case of the prefabricated building is used, the optimal solution of that is obtained in MATLAB with particle swarm algorithm (PSO), which proves the effectiveness of the model presented in this paper.

• Electronics and Telecommunications Trends
• /
• v.20 no.1 s.91
• /
• pp.147-156
• /
• 2005

이동 환경에서 뿐만 아니라 향후 단말 중심의 개인화 서비스가 제공되는 유비쿼터스 환경에서는 다양한 단말 및 센서들이 존재할 것이고 이들은 네트워크 상에서 서로 상대의 위치를 인식하여 특정 장치가 가진 기능이나 서비스를 획득하기 위하여 상호 통신하거나 새로이 추가되는 장치를 자동으로 구성할 수있어야 한다. 이와 같이, 위치 기반 서비스 및 peer-to-peer 컴퓨팅을 지원하기 위해 ‘서비스 발견’은 모바일 컴퓨팅을 위한 미들웨어로서의 역할을 수행하게 될 것이다. 본 논문에서는 JINI, UPnP, Salutation, SLP2, Bluetooth SDP 등의 기술에서 제공되는 서비스 발견 프로토콜(메커니즘)을 살펴보고 이들의 특성을 비교하고자 한다.

• Feed Journal
• /
• v.4 no.10 s.38
• /
• pp.78-81
• /
• 2006

국내 최초 순수 오징어 내장 흡착사료(SLP)개발,최초 특허 받은 추출기술로 DHA생산, 최초 미산 탈피 대두박 직수입...(주)동우산업(경상북도 포항시 남구 구룡포읍 병포리 469-9번지)에게 있어 '최초'라는 단어는 낯설지가 않다. '개발과 연구'가 기업의 경쟁력이며,'투자 없이 일궈낼 수 있는 일이란 없다'며 과감한 투자를 아끼지 않는 김철곤 회장의 경영철학 때문. 그런 (주)동우산업이 최근 어분을 대체할 수 있는 오징어 부산물을 이용한 양식사료 개발, DHA분말화 등 산업자원부 및 관내 대학과 연계, 연구를 활발히 수행해 관련 학계와 업계로 부터 주목받고 있다.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.3
• /
• pp.261-268
• /
• 2002

In this paper, the shape optimization is considered over the upper slab of reinforced concrete culvert. The sequential linear programming method (SLP) is used as a rational approach to this shape optimization. To make a comparison between the arch shaped member and the straight member for the upper slab, the culverts with 5~20m earth height were adopted. It is shown that the optimum rise/span is about 7%-13%, and the arch shaped member is more cheap (over 10%) than the straight member for the construction cost.

• Information and Communications Magazine
• /
• v.21 no.3
• /
• pp.54-65
• /
• 2004

지난 몇 년간 유비쿼터스 컴퓨팅에 대한 많은 연구가 진행되어 오면서 이를 홈네트워크에 적용하기 위한 시도들이 생겨났다 우선 유비쿼터스 컴퓨팅은 일반 사람들도 쉽게 제어할 수 있는 안전한 범용 시스템이 되어야 하며, 특히 가정에 거주하는 사람들이 홈네트워크의 관리자가 되도록 해야 한다. 지금까지 SIP(Session Initiation Protocol) 기반의 시스템이 개발되고 있고, 위치 센싱을 위한 블루투스 디바이스와, 서비스 발견을 위한 SLP(Service Location Protocol) 기능이 요구되고 있는데, 본 고에서는 디바이스 발견과 사용자 컴퓨팅을 증대시키기 위한 상황인지 기반 위치 정보에 대해 소개하고자 한다.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.2
• /
• pp.181-186
• /
• 2004

This study presents a optimization of structure, in which constraints contain the conditions of stress and serviceability, while the sequential linear programming method (SLP) is used as a rational approach. The optimum design results contained on the limit state constraints are compared with those obtained by the only stress and ministry of construction enacted standard plans. A simple slab bridge is analysed numerically for illustration of the structural optimization. It may be asserted that serviceability constraints is very important to a structure design.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.2
• /
• pp.95-102
• /
• 2003

In this paper, optimum design is considered over the retaining wall with seismic constraints. The sequential linear programming method(SLP) is used as a rational approach to this optimum design. To make a comparison between the seismic design and the normal design, retaining wall with 4~7m height were adopted. It is shown that the seismic design is more expensive (over 30%) than the normal design for the construction cost.