• 한국재료학회지
• /
• 제25권5호
• /
• pp.258-263
• /
• 2015

To fabricate porous SiC-Si composites for heating element applications, both SiC powders and Si powders were mixed and sintered together. The properties of the sintered SiC-Si body were investigated as a function of SiC particle size and/or Si particle contents from 10 wt% to 40 wt%, respectively. Porous SiC-Si composites were fabricated by Si bonded reaction at a sintering temperature of $1650^{\circ}C$ for 80 min. The microstructure and phase analysis of SiC-Si composites that depend on Si particle contents were characterized using scanning electron microscope and X-ray diffraction. The electrical resistivity of SiC-Si composites was also evaluated using a 4-point probe resistivity method. The electrical resistivity of the sintered SiC-Si body sharply decreased as the amount of Si addition increased. We found that the electrical resistivity of porous SiC-Si composites is closely related to the amount of Si added and at least 20 wt% Si are needed in order to apply the SiCSi composites to the heating element.

• 한국분말재료학회지
• /
• 제15권5호
• /
• pp.345-351
• /
• 2008

The effects of the dopant (Mn) ratio on the microstructure and thermoelectric properties of $FeSi_2$ alloy were studied in this research. The alloy was fabricated by a combination process of ball milling and high pressure pressing. Structural behavior of the sintered bulks were systematically investigated by XRD, SEM, and optical microscopy. With increasing dopan (Mn) ratio, the density and ${\varepsilon}-FeSi$ phase of the sintered bulks increased and maximum density of 94% was obtained in the 0.07% Mn-doped alloy. The sintered bulks showed fine microstructure of ${\alpha}-Fe_{2}Si_{5}$, ${\varepsilon}-FeSi$ and ${\beta}-FeSi_2$ phase. The semiconducting phase of ${\beta}-FeSi_2$ was transformed from ${\alpha}-Fe_{2}Si_{5}+{\varepsilon}-FeSi$ phase by annealing.

• 한국진공학회지
• /
• 제15권2호
• /
• pp.152-161
• /
• 2006

일차원의 대칭성을 갖는 형판 위에서 Bi원자가 자발적으로 형성하는 나노 구조체의 원자 구조를 이해하기 위하여, 재구조 된 Si(5 5 12)을 Bi의 탈착 온도에 가까운 온도로 가열한 채 Bi를 흡착시키고 주사 터널링 현미경으로 그 원자 구조를 각 흡착 단계별로 규명하였다. 제일 먼저 Bi는 이 기판에 존재하는 여러 종류의 $[\bar{1}\;1\;0]$에 평행한 row들 중에서 기판과 결합력이 가장 약한 dimer row와 adatom row 만을 선택적으로 Bi-dimer row와 Bi-adatom row로 각각 치환한다. 이 과정에서 치환된 Bi는 Si과의 크기 차이로 인해 인접한 (337) subsection에 tensile stress를 인가하게 되고, 그 결과 (337) subsection 내의 tetramer row는 갈라져 dimer row와 adatom row로 변형되고, 이들 역시 Bi-dimer row와 Bi-adatom row로 각각 치환된다. 다음으로 이들 치환된 Bi-dimer row와 Bi-adatom row 위에 각각 Bi-dimer가 흡착하면 서로 마주보며 안정된 Bi-dimer pair를 이루며, 이 pair 역시 row를 이루고 둘째 층을 형성한다. 마지막으로 셋째 층의 Bi는 둘째 층의 마주보는 Bi-dimer pair 위에 흡착한 한 개의 Bi-dime이며 더 이상의 Bi는 쌓이지 않는다. 이와 같이 자발적으로 조립되는 Bi-dimer row의 형성 원인을 종합하면, 재구조 된 Si(5 5 12) 위에서 Bi의 선택적 반응, Bi와 Si의 크기 차이로 인한 표면 stress의 유발, Bi 원자 간의 안정된 결합형태 등을 들 수 있다.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.372-377
• /
• 2013

Machinable SiC ceramics are prepared with the addition of $Al_2TiO_5$. Ready-to-press SiC and $Al_2TiO_5$ powders are mixed and pressureless sintered at $1750^{\circ}C$ and $1850^{\circ}C$ for 1 h. The weight ratios of the SiC and $Al_2TiO_5$ powders are 100 : 0, 100 : 10, and 100 : 20. After sintering, only SiC peaks are detected in the X-ray diffraction analyses. The density, strength, and grain size of the SiC increase with increases in the $Al_2TiO_5$ content and sintering temperature. The $Al_2TiO_5$-doped specimens are easy to micro-hole machine. Based on the density and strength data, the ceramics sintered at $1850^{\circ}C$ can be used as machinable ceramics.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.535-543
• /
• 1997

The surface of SiC particles were partially oxidized to produce SiO2 layers on the SiC particles to prepare Al2O3/SiC composite by formation of mullite bonds between the grains of Al2O3 and SiC during sintering at 1$600^{\circ}C$. This process is considered to enable the sintering of Al2O3/SiC composite at lower temperature and also to relieve the stress, produced by thermal expansion mismatch between Al2O3 and SiC. In fact, Al2O3/SiC composite prepared by oxidation of SiC was observed to be more effectively sintered and densified at lower temperature. Maximum density, flexural strength and microhardness were obtained with 5.65 vol% of mullite content in Al2O3/SiC composite.

• Advances in nano research
• /
• 제5권3호
• /
• pp.261-279
• /
• 2017

Spectroscopic investigation of Si quantum dots (Si-QDs) embedded in silicon nitride was performed over a broad stoichiometry range to optimize light emission. Plasma-enhanced chemical vapor deposition was used to grow the $SiN_x$ films on Si (001) substrates. The film composition was controlled via the flow ratio of silane ($SiH_4$) and ammonia ($NH_3$) in the range of R = 0.45-1.0 allowed to vary the Si excess in the range of 21-62 at.%. The films were submitted to annealing at $1100^{\circ}C$ for 30 min in nitrogen to form the Si-QDs. The properties of as-deposited and annealed films were investigated using spectroscopic ellipsometry, Fourier transform infrared spectroscopy, Raman scattering and photoluminescence (PL) methods. Si-QDs were detected in $SiN_x$ films demonstrating the increase of sizes with Si excess. The residual amorphous Si clusters were found to be present in the films grown with Si excess higher than 50 at.%. Multi-component PL spectra at 300 K in the range of 1.5-3.5 eV were detected and nonmonotonous varying total PL peak versus Si excess was revealed. To identify the different PL components, the temperature dependence of PL spectra was investigated in the range of 20-300 K. The analysis allowed concluding that the "blue-orange" emission is due to the radiative defects in a $SiN_x$ matrix, whereas the "red" and "infrared" PL bands are caused by the exciton recombination in crystalline Si-QDs and amorphous Si clusters. The nature of radiative and no radiative defects in $SiN_x$ films is discussed. The ways to control the dominant PL emission mechanisms are proposed.

• 대한금속재료학회지
• /
• 제46권5호
• /
• pp.304-309
• /
• 2008

Magnesium alloys containing $Mg_2Si$ particles, as a promising cheap heat-resistant magnesium alloy for automobile power train parts applications, are attracting more attention of both material scientists and design engineers. Modification of the Chinese script shape $Mg_2Si$ particle is a key for using this alloy in sand or permanent mould casting. In the present work, the modification effect of Sr and Sb on the corrosion properties of the Mg-5Al-2Si alloy was investigated. Sr or Sb addition promoted the formation of fine polygonal shape $Mg_2Si$ particles by providing the nucleation sites. Sr was more effective element than Sb for shape modification of Chinese script shape $Mg_2Si$. Such improved microstructure of the modified alloy resulted in large improvement in corrosion resistance as compared to unmodified Mg-5Al-2Si alloy.

• 한국결정성장학회지
• /
• 제11권6호
• /
• pp.285-289
• /
• 2001

본 연구에서는 Langasite 보다 우수한 압전특성을 나타낼 것으로 기대되는 같은 구조를 갖는 새로운 화학조성을 각 자리의 치환을 조사하였다. 합성된 물질은 $Ca_3TaGa_5Si_{2}O_{14}$로서 고상합성법에 의한 합성이 되었으며 이를 바탕으로 $\mu$-PD(micro-pilling-down)와 Cz법에 의해 결정성장을 시도하였다. 성장된 결합은 XRD와 EPMA를 통해 격자상수 화학조성 분포가 분석되었다.

• 한국결정성장학회지
• /
• 제7권1호
• /
• pp.18-26
• /
• 1997

소결조제로 Y 3Alo012를 첨가한 {3- SiC 분말에 seed로서 1 wt%의 a- SiC 분말을 첨 가한 시편과 첨가하지 않은 시편을 1950$^{\circ}$C, argon 분위기에서 0.5~4시간 동안 소결하였다. S Seed로써 1 wt% a-SiC 분말의 첨가는 소결 도중에 길게 자란 업자틀의 성장을 가속시켰고, a a- SiC seed를 첨가한 시편에서 더 조대한 미세구조가 얻어졌다 .. a-SiC seed를 첨가하여 4시간 동안 소결한 시편의 파괴인성은 7.5 MPa'ml/2이었고, seed를 첨가하지 않은 시편의 파괴인성은 6 6.1 MPa'm1/2이었다 .. Seed를 첨가한 시편의 높은 파괴인성은 조대한 미세구조에 포함된 길게 자란 입자들에 의한 균열가교 기구의 활발한 작용에 기인한다.

• 한국표면공학회지
• /
• 제54권5호
• /
• pp.230-237
• /
• 2021

In this study, the influence of silicon contents on the microstructure, mechanical and tribological properties of Ti-Al-Si-N coatings were systematically investigated for application of cutting tools. The composition of the Ti-Al-Si-N coatings were controlled by different combinations of TiAl₂ and Ti₄Si composite target powers using an arc ion plating technique in a reactive gas mixture of high purity Ar and N₂ during depositions. Ti-Al-Si-N films were nanocomposite consisting of nanosized (Ti,Al,Si)N crystallites embedded in an amorphous Si₃N₄/SiO₂ matrix. The instrumental analyses revealed that the synthesized Ti-Al-Si-N film with Si content of 5.63 at.% was a nanocomposites consisting of nano-sized crystallites (5-7 nm in dia.) and a three dimensional thin layer of amorphous Si₃N₄ phase. The hardness of the Ti-Al-Si-N coatings also exhibited the maximum hardness value of about 47 GPa at a silicon content of ~5.63 at.% due to the microstructural change to a nanocomposite as well as the solid-solution hardening. The coating has a low friction coefficient of 0.55 at room temperature against an Inconel alloy ball. These excellent mechanical and tribological properties of the Ti-Al-Si-N coatings could help to improve the performance of machining and cutting tool applications.