• 멤브레인
• /
• 제14권4호
• /
• pp.312-319
• /
• 2004

졸겔법에 의해 Si(OC$_2$$H_5$/)$_4$-($CH_3$O)$_3$B-C$_2$$H_5$OH-$H_2O$계로부터 다공성의 SiO$_2$-B$_2$O$_3$ 막을 제조하였다. SiO$_2$-B$_2$O$_3$막의 특성을 BET, IR spectrophotometer, X-ray diffractometer, SEM 과 TEM을 사용하여 조사하였다. $700^{\circ}C$에서 얻어진 SiO$_2$-B$_2$O$_3$ 막의 평균 기공직경은 0.0048 $\mu\textrm{m}$이고, 표면적은 354.398 $m^2$/g이었으며, 입자의 크기는 7 nm인 무정형의 다공체이었다. SiO$_2$-B$_2$O$_3$ 막의 수소/질소 혼합 기체 분리 특성은 기체분리 압력을 달리하여 조사하였다. $25^{\circ}C$, ΔP 155.15cmHg에서 수소/질소 혼합 기체를 분리하여 본 결과 SiO$_2$-B$_2$O$_3$ 막의 수소에 대한 real separation factor($\alpha$)는 4.68이었다. 그리고 투과셀의 압력차(ΔP)값이 증가할수록 real separation factor($\alpha$), head separation factor($\beta$), tail separation factor((equation omitted))값이 증가하였다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2004년도 추계학술대회 논문집
• /
• pp.301-306
• /
• 2004

The purpose of this study is to supply basic data for distinction of Support and Infill in Open Housing. This study is based on archive survey and actual investigation through visiting four sites in Japan, which are experimental SI(skeleton & infill) housings. We found a lot of distinction techniques and methods applied to the SI housings, and findings are applicable to the planning and designing works of apartment housings. Based on the theoretical Studies concerning the distinction and separation of SI housing, this study made out interface map for separation and distinction of housing components and examined a design method of separation accordingly.

• 한국주조공학회지
• /
• 제29권1호
• /
• pp.38-44
• /
• 2009

Magnetic separation of Fe contaminated Al-Si cutting chip scraps was performed for the recyclability assessment. It was also aimed to investigate the casting and solidification characteristics of the cutting chip scraps. The magnetically separated cutting chip scraps were adequately treated for the casting procedure and test specimens were made into a stepped mold inducing different cooling rates. The test specimens were evaluated by the combined analysis of ICP, Spectroscopy, OM-image analyzer, SEM/EDS, etc. Solidification characteristics of cutting chip scraps were examined as functions of Fe content and cooling rate. It is concluded that the magnetic separation process can be utilized to recycle the Fe contaminated Al-Si cutting chip scraps in the high cooling rate foundry process.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.312-319
• /
• 2017

국내 부존 청광 규조토의 고부가가치 활용을 위해 물리적인 불순물 정제 및 정제 규조토 중의 SiO2 성분을 규소원으로 한 탄화규소 분말합성에 대해 연구하였다. 청광 규조토를 hammer mill을 이용해서 분쇄한 후 체가름을 통한 입도 분리에 의해서 약 30% 정도의 철분 ($Fe_2O_3$) 정제 효과를 얻을 수 있었으며, 325 mesh 이하 입도 분말의 철분 함량은 약 2% 이었다. 습식 및 건식 자력선별의 경우 모두 철분 함량의 분리 및 정제 효과가 일부 있었지만 회수되는 비자성 부산물 중의 철분 함량이 약 2%로 잔존양이 많음을 알 수 있었다. 청광 원광의 물 침출은 철분 제거에 효과적이었으며, 물 침출 결과 약 40% 정도의 철분이 제거되었다. 또한 정제 규조토 중의 $SiO_2$ 성분을 탄소 (흑연, 카본블랙)로 환원 탄화 반응시켜 ${\beta}$-SiC를 합성하였고, 합성 분말의 산처리를 통한 철분 정제 및 비표면적 변화 등에 대해 연구하였다. 환원제로 흑연보다는 카본블랙을 사용함이 보다 효과적이었고, 산처리공정에 의해 Fe, Ca 등의 불순물들이 거의 제거되었고, 비표면적은 $52.5m^2/g$ 까지 증가하였다.

• 한국전기전자재료학회논문지
• /
• 제30권5호
• /
• pp.301-306
• /
• 2017

Wire electrical discharge machining (WEDM) process was evaluated to slice Silicon (Si) for various applications. Specifically, various Si workpieces with various resistances, such as single and multi crystalline Si bricks and wafers were used. As conventional slicing processes, such as slurry-on or diamond-on wire slicing, are based on mechanical abrasions between Si and abrasive, there is a limitation to decrease the wafer thickness as well as kerf-loss. Especially, when the wafer thickness is less than $150{\mu}m$, wafer breakage increases dramatically during the slicing process. Single crystalline P-type Si bricks and wafers were successively sliced with considerable slicing speed regardless of its growth direction. Also, typical defects, such as microcracks, craters, microholes, and debris, were introduced when Si was sliced by electrical discharge. Also, it was found that defect type is also dependent on resistance of Si. Consequently, this study confirmed the feasibility of slicing single crystalline Si by WEDM.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.78-85
• /
• 2019

The effect of various lithium sources such as LiCl, LiOH, and Li-metal on the microstructure and electrochemical properties of granulated $SiO_x$ powders were investigated. Various lithium sources were metallurgically added for a passive pre-lithiation of $SiO_x$ to improve its low initial coulombic efficiency. In spite of using the same amount of Li in various sources, as well as the same process conditions, different lithium silicates were obtained. Moreover, irreversible phases were formed without reduction of $SiO_x$, which might be from additional oxygen incorporation during the process. Accordingly, there were no noticeable electrochemical enhancements. Nevertheless, the $Li_4SiO_4$ phase changes the initial electrochemical reaction, and consequently the relationship between the microstructure and electrochemical properties of metallurgically pre-lithiated $SiO_x$ could provide a guideline for the optimization of the performance of lithium ion batteries.

• 분석과학
• /
• 제14권1호
• /
• pp.28-33
• /
• 2001

자연수에 존재할 가능성이 있는 $Pu^{3+}$, $Pu^{4+}$, $PuO_2{^+}$, $PuO_2{^{2+}}$ 상태의 플루토늄을 이온크로마토그래피로 분리하는 방법을 연구하였다. 각각 $SiO^-$, SiO-$SO_3{^-}$작용기를 가진 이온교환체를 충전한 두 컬럼을 이용하는 방법과, Dionex사 AG11컬럼에 oxalate/$HNO_3$ 용리액을 사용하여 IC로 분리하는 두 가지 방법을 시도하였다. 예비실험으로서 플루토늄과 화학적 성질이 유사하며 산화수가 안정한 $Eu^{3+}$, $Th^{4+}$, $NpO_2{^+}$, $UO_2{^{2+}}$을 사용하여 분리조건을 얻었다. 이 분리조건을 플루토늄에 적용시켰을 때, $SiO^-$, SiO-$SO_3{^-}$ 이온교환체를 이용한 방법은 산화수별 플루토늄을 성공적으로 분리할 수 있었다. 그러나 IC를 사용한 방법은 oxalate 용액에서 $Pu^{3+}$가 쉽게 $Pu^{4+}$로 산화되며, $PuO_2{^{2+}}$도 $PuO_2{^+}$로 환원되어 분리가 곤란하였다.

• 자원리싸이클링
• /
• 제12권3호
• /
• pp.25-30
• /
• 2003

본 연구의 목적은 실리콘웨이퍼의 절단공정에서 발생한 폐슬러리와 폐망간전지에서 발생하는 흑연봉을 각각 규소 및 탄소의 출발물질로 사용하여 가스터빈 부품, 열교환기 등에 사용되는 탄화규소(SiC)를 합성하는 연구를 수행하였다. 실리콘웨이퍼의 절단공정에서 발생하는 폐슬러리로부터 비중차이에 의한 선별과 자력선별 등에 의해 정제된 규소와 탄화규소를 얻을 수 있었으며, 폐망간전지를 해체하여 얻은 탄소봉으로부터 수세와 분쇄를 통하여 탄소분말을 얻을 수 있었다. 탄화규소의 합성은 규소와 당량비의 탄소분발을 혼합하여 1$600^{\circ}C$이상의 온도에서 아르곤 분위기와 진공분위기 하에서 2시간 유지시켰을 때 이루어졌으며, 이때 합성된 탄화규소의 순도는 99% 이상이었다.

• ETRI Journal
• /
• 제34권2호
• /
• pp.226-234
• /
• 2012

The novelty of this study resides in the fabrication of stoichiometric and stress-reduced $Si_3N_4/SiO_2/Si_3N_4$ triple-layer membrane sieves. The membrane sieves were designed to be very flat and thin, mechanically stress-reduced, and stable in their electrical and chemical properties. All insulating materials are deposited stoichiometrically by a low-pressure chemical vapor deposition system. The membranes with a thickness of 0.4 ${\mu}m$ have pores with a diameter of about 1 ${\mu}m$. The device is fabricated on a 6" silicon wafer with the semiconductor processes. We utilized the membrane sieves for plasma separations from human whole blood. To enhance the separation ability of blood plasma, an agarose gel matrix was attached to the membrane sieves. We could separate about 1 ${\mu}L$ of blood plasma from 5 ${\mu}L$ of human whole blood. Our device can be used in the cell-based biosensors or analysis systems in analytical chemistry.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.662-667
• /
• 2009

Porous SiC candle filter preforms were fabricated by extrusion and ramming process. To fabricate SiC candle filter preform, commercially available 85 ${\mu}m\;{\alpha}-$-SiC powder and 44 ${\mu}m$ mullite, CaC$O_3$ powder were used as the starting materials. The candle type preforms were fabricated by vacuum extrusion and ramming process, and sintered at $1400{^{\circ}C}$ 2 h in air atmosphere. The effect of forming method on porosity, density, strength (flexural and compressive strength) and microstructure was investigated. Also, corrosion test of the sintered candle filter specimens as forming method was performed at $600{^{\circ}C}$ in IGCC syngas atmosphere. The sintered SiC filter which was formed by ramming process has more higher density and exhibit higher strength than extruded filter. Its maximum density and 3-point bending strength were 2.00 g/$cm^3$ and 45 MPa, respectively.