• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.392-399
• /
• 2005

Shear modulus (or rigidity) of dam material is an important parameter which can be directly associated with the deformation of dam. Seepage or leakage of water can cause the defects or cracks of dam body. The existence of cracks and rigidity of dam body are decisive information for the estimation of dam safety. Rigidity of material is mainly determined from S-wave velocity and the defects of dam body can be detected by seismic reflection survey. Therefore, seismic reflection survey will be a desirable method which can give a solution about dam safety problem. Among various physical properties of dam body, S-wave velocity is the most important information but it is not easy to get the information. In this study, diverse measuring techniques of S-wave reflection survey were attempted to get the information about S-wave velocity of dam body. Ultimately, S-wave velocity could be estimated by the analysis of SH reflection events which can be easily observed in shot gather data obtained from SH measuring technique. Meanwhile, P-wave reflection survey was also performed at the same profile. P-beam radiation technique which can reduce the surface waves and reinforce the P-wave reflection events was applied for giving a help to analyse P-wave velocity. In the end, P-and S-wave velocity, Vs/Vp, Poisson's ratio distribution of the vertical section under the profile could be acquired.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.5
• /
• pp.65-72
• /
• 1996

A dynamic self-consistent method previously proposed and validated for the composites containing spherical inclusions is applied to the simplest two dimensional problems : SH wave propagation in unidirectional fiber reinforced composites. The self-consistent conditions for SH wave are derived without limitation on frequency and the wave speed and coherent attenuation are calculated for two composites. THe results of the present theory are compared with those of the multiple scattering theories and another self-consistent theory. At low volume fractions, the present theoretical results coincide with those of the multiple scattering theory using exact pair-correlation function, whereas the results based on another self-consistent theory deviate markedly from the others. As the volume fraction increases, the three theories give different results although they have qualitatively similar trends. The present theoretical results for composites considered in this paper exhibit less dispersion and physically realizable attenuation. An important observation is that the multiple scattering theory predicts vanishingly small attenuation at low frequency with volume fraction is high.

• The Journal of Engineering Geology
• /
• v.7 no.1
• /
• pp.63-79
• /
• 1997

In this study, our purpose is to develop a technique to discriminate artificial explosions from local microearthquakes on the basis of time-frequency domain. To obtain spectral features of artificial explosions and microearthquakes, we used 3-d spectrograms(frequency, time and amplitude) because this is a useful tool to study the frequency content of entire seismic waveforms observed at local and regional distances (e. g., Kim et al., 1994). P and S waves from quarry blasts show that frequency content of dominant amplitude appeared above 10 Hz and Rg phases that are observed at near distance ranges. But P and S waves from microearthquakes have more broad frequency content as well as below 10 Hz. And for discrimination, Pg/Lg spectral ratio is performed below 10 Hz. In order to select time windows we computed group velocity using multiple filter method(MFM) and removed free surface effects from all 3-components data for improving on data quality. Next step, we computed Fast-Fourier transform, and a log average spectral amplitude over seven frequency bands : 0.5 to 3, 2 to 4, 3 to 5, 4 to 6, 5 to 7, 6 to 8 and 8 to 10 Hz. The best separation is observed from 6 to 8 Hz.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.223-226
• /
• 2005

In order to acquire 3 components data which has the good signal to noise ratio with only one shot, 3-C geophones were used, As a result, the vertical component showed the distinct first arrival of P-wave, and the horizontal component was improved the signal to noise ratio of S-wave, while was attenuated P-wave. The 2-D Poisson's ratio section was computed from P- and S-wave cell velocities included velocity tomograms of the P- and S-waves. The Poisson's ratio values were computed in the range of $0.2{\~}0.3$. With one shot, we can obtain 2-D distribution of dynamic Poisson's ratio as well as velocity tomograms of P- and S-waves.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.61-73
• /
• 2004

Rayleigh wave and Love wave are the major elastic waves belonging to the category of the surface wave. The fact that Love wave is not contaminated by P-wave makes Love wave superior to Rayleish wave and other body waves. Therefore, the information that Love wave carries is more distinct and clearer than the information of Rayleigh wave. In this study, for the purpose of employing Love wave in the SASW method, the dispersion characteristics of the Love wave were extensively investigated by the theoretical, numerical and experimental approaches. The 2-D and 3-D finite element analyses for the half space and two-layer systems were performed to determine the phase velocities from Love wave as well as from both the vertical and the horizontal components of Rayleigh wave. Also, the SASW measurements were performed at the geotechnical sites to verify the results obtained by the numerical analysis. The results of the numerical analysis and the field testing indicated that the dispersion characteristics of Love wave can be an extended information to make better evaluation of the subsurface stiffness structure by SASW method.

• Structural Engineering and Mechanics
• /
• v.44 no.5
• /
• pp.663-680
• /
• 2012

Previous major earthquakes revealed that most damage of the buried segmented pipelines occurs at the joints of the pipelines. It has been proven that the differential motions between the pipe segments are one of the primary reasons that results in the damage (Zerva et al. 1986, O'Roueke and Liu 1999). This paper studies the combined influences of ground motion spatial variations and local soil conditions on the seismic responses of buried segmented pipelines. The heterogeneous soil deposits surrounding the pipelines are assumed resting on an elastic half-space (base rock). The spatially varying base rock motions are modelled by the filtered Tajimi-Kanai power spectral density function and an empirical coherency loss function. Local site amplification effect is derived based on the one-dimensional wave propagation theory by assuming the base rock motions consist of out-of-plane SH wave or combined in-plane P and SV waves propagating into the site with an assumed incident angle. The differential axial and lateral displacements between the pipeline segments are stochastically formulated in the frequency domain. The influences of ground motion spatial variations, local soil conditions, wave incident angle and stiffness of the joint are investigated in detail. Numerical results show that ground motion spatial variations and local soil conditions can significantly influence the differential displacements between the pipeline segments.

• Geomechanics and Engineering
• /
• v.16 no.2
• /
• pp.169-176
• /
• 2018

An attempt has been made here to study the propagation of SH-type surface waves in an elastic medium, which is initially stressed and heterogeneous and has a point source inside the medium. The upper portion of the composite medium is a sandy layer. It is situated on an initially stressed heterogeneous half-space, whose density, rigidity and internal friction are function of depth. The analysis has been carried out by using Fourier transform and Green's function approach. The phase velocity has been investigated for several particular situations. It has been shown that the results of the study agree with those the case of Love wave propagation in a homogeneous medium in the absence of the sandy layer, when the initial stress is absent. In order to illustrate the validity of the analysis presented here, the derived analytical expression has been computed numerically, by considering an illustrative example and the variances of the concerned physical variables have been presented graphically. It is observed that the velocity of shear wave is amply influenced by the initial stress and heterogeneity parameters and the presence of the sandy layer. The study has an important bearing on investigations of different problems in the earth's interior and also in seismological studies.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.3
• /
• pp.179-187
• /
• 1977

This study intended to investigate the shape of the artificial fish reefs settled in the waters of Seogwipo, and the thronging of fish schools into them. The results obtained are summarized as follows : 1. Two types of artifical fish reef, circularized vertical type which is composed of Cryptomeria branches and parachute type, were put off the coast of Seogwipo at $33^{\circ}14'05'$ N Lat., $126^{\circ}34'40'$ E Long. The setting place is located 0.4 sea-mile away from natural fish reefs, at 25 m in depth. And its sediment is consisted of f. S. and Sh. 2. Maximum velocity of wind drift current was 15.28 cm/sec at 15 m depth. The Current direction was $20.5\%$n in the WSW. 3. Maximum fluid resistance of the circularized vertical type to current and wind waves showed about 890 kg, and the weight of sand bags attached to the fish reef totaling 1,200 kg was enough to sustain fish reef. 4. As maximum fluid resistance of the parachute type to current and wind waves was 106.3 kg, the retaining force of sand bags was enough to sustain the fish reef, but vinyl canvas and expansion materials were so poor that the fish reef was lost by the sea current and wind waves. 5. Sixteen species of fish among 53 usually caught in this area were thronged into the artificial fish reef. The fish catches comprized Porgy (Pagrosomus major) $23\%$, black kook fish (Sebastes (Mebarus) intermis) $13\%$, sand borer (Sillago sihama) $11\%$, Sebastes (Pteropodus) hubbsi $7\%$, and file fish (Monacanthus cirrhifer) $6\%$. According to the submarine observations by fivers, it was confirmed that a lot of fish larvae thronged in the middle part of the fish reefs.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.41-49
• /
• 2006

This paper demonstrates the feasibility of using shallow S-wave, high-resolution seismic reflection surveys to characterize geological structure and stratigraphy of basement rocks for civil engineering purposes. S-wave seismic reflections from depths less than 20 m were recorded along the top of steep readout slopes. Seismic reflection data were recorded using a standard CDP acquisition method with a 24-channel seismograph and a sledge-hammer SH-wave source. The data were acquired using a split-spread source-receiver geometry with a 2 m shot-and-receiver interval, and then were processed to enhance S/N ratio of the data, to improve resolvable power of the seismic section, and to get velocity information of the basement rock. The final seismic reflection profiles using the CDP technique has imaged surfaces as shallow as less than 1m and resolved beds as thin as 1m. The migrated reflection sections possess sufficient quality to correlate the prominent reflection events to the bedding planes and faults identified on the readout outcrops. Similar S-wave reflection surveys could also be used to produce the necessary details of a geological structure of shallow bedrocks to pinpoint optimum locations for monitor wells of civil engineering purposes.

• Geophysics and Geophysical Exploration
• /
• v.16 no.3
• /
• pp.109-118
• /
• 2013

On and near the 23-m high earthen Cheongcheon dam in Boryeong City, Korea, short seismic refraction and surface-wave profiles were conducted using a 5-kg sledgehammer. From vertical and horizontal components of the seismic waves, near-surface P-wave velocities (${\nu}_p$) and S-wave velocities (${\nu}_s$) were derived by inverting first-arrival refraction times and dispersion curves of Rayleigh waves. Average ${\nu}_p$ and ${\nu}_s$ for the Jurassic sedimentary basement were determined to be 1650 and 950 m/s at a depth of 30 m directly beneath the dam and 1650 m/s and 940 m/s at a depth of 10 m at the toe of the dam, respectively. The dynamic Poisson's ratio for these strata were therefore in the range of 0.24 to 0.25, which is consistent with ratios for consolidated sedimentary strata. Near a 45-m borehole 152 m downstream from the dam crest, an SH tomogram indicates a refraction boundary with an average ${\nu}_s$ of 870 m/s at depths of 10 ~ 12 m. At this site, the overburden comprises the upper layer with relatively constant ${\nu}_p$ and ${\nu}_s$ around 500 and 200 m/s, respectively, and the lower layer in which both ${\nu}_p$ and ${\nu}_s$ increase with depth almost linearly. The dynamic Poisson's ratios for the overburden were in the range of 0.30 to 0.43.