• 제목/요약/키워드: SGM

검색결과 34건 처리시간 0.028초

위성영상으로 DSM을 생성하기 위한 SGM Cost의 비교 (Comparison of SGM Cost for DSM Generation Using Satellite Images)

  • 이효성;박순용;권원석;한동엽
    • 한국측량학회지
    • /
    • 제37권6호
    • /
    • pp.473-479
    • /
    • 2019
  • 본 연구는 ISPRS (International Society for Photogrammetry and Remote Sensing)에서 제공하는 스페인 Terrassa 지역의 WorldView-1 고해상도 스테레오 위성영상으로부터 DSM (Digital Surface Model) 제작을 위해 SGM을 적용하였다. SGM (Semi Global Matching)은 스테레오 영상에 대한 매칭 Cost를 여러 방향에서 계산하고, 계산된 Cost를 순차적으로 누적시킨 후, 누적된 Cost의 최소(또는 최대) 값에 해당하는 시차를 계산하는 영상매칭 알고리즘이다. SGM 적용을 위한 Cost는 MI (Mutual Information, NCC (Normalized Cross-Correlation), CT (Census Transform)를 적용하였으며, 각각의 Cost별 DSM에서 지형지물의 외곽선 표현결과 정확도와 그 성능을 제시하였다. 사용 영상과 실험 대상지역을 토대로, CT Cost 결과 정확도가 가장 우수하였으며, 외곽선 표현 또한 가장 선명하게 묘사되었다. 아울러 SGM 방법은 기존 소프트웨어에 비해 보다 세밀한 외곽선을 표현한 반면 수계지역에서는 많은 오류가 발생하였다.

분류영상과 에지영상을 이용한 입체 위성영상의 SGM 성능개선 (SGM Performance Improvement of Stereo Satellite Image with Classified Image and Edge Image)

  • 이효성;박병욱
    • 한국측량학회지
    • /
    • 제38권6호
    • /
    • pp.655-661
    • /
    • 2020
  • SGM (Semi Global Matching)은 입체영상 간 모든점의 매칭점을 찾기 때문에 고해상도 위성영상으로부터 고밀도 수치표면모델 제작이 가능하다. 그러나 물과 그림자, 폐색 지역이 포함되면 그 주변지점에도 오매칭의 영향을 준다. 특히 우리나라 아파트 구조물과 같이 시차가 크고 길쭉한 형태의 건물에서는 50cm급 고해상도 위성영상에 SGM 방법을 적용하더라도 건물의 3차원 복원은 어렵다. 따라서 본 연구는 1m급 해상도의 IKONOS-2 입체 위성 영상으로부터 분류영상과 에지영상을 이용한 SGM 기법을 제안, 적용하여 수치표면모델을 제작하고 일반 SGM 방법, ERDAS 소프트웨어의 고밀도 ABM (Area Based Matching) 매칭으로 제작한 수치표면모델과 비교하였다. 실험 대상지역에는 제안방법의 아파트 수치표면모델 결과가 가장 우수하였다. 결과적으로, 해상도가 1m 임에도 불구하고 제안방법을 이용하여 건물 수치표면모델의 윤곽선을 기존 방법에 비해 더욱 더 선명하게 표현할 수 있었다.

정확한 스테레오 시차를 위한 시차기울기 기반의 새로운 SGM (Disparity Gradient-Based New Semi-Global Matching for Accurate Stereo Disparity)

  • 차미혜;박정민;이준웅
    • 제어로봇시스템학회논문지
    • /
    • 제22권1호
    • /
    • pp.46-52
    • /
    • 2016
  • We propose a new type of semi-global matching (SGM) in order to solve a streaking problem arising from conventional SGM. Conventional SGM imposes a penalty to a pixel when the disparity of the pixel differs from that of the previous pixel along a scan path, and thus, disparity changes are not easily allowed, causing the streaking effect. The road surface is an appropriate target for such an effect, because the colors of the surfaces are very similar, and the image pixels corresponding to the surfaces show disparities that change very smoothly along the viewing direction. In contrast to conventional SGM, the new type of SGM imposes penalties depending on the disparity gradients, and thus, the streaking effect is controlled. The experimental results show the effectiveness of the proposed SGM method.

Topographic Information Extraction from Kompsat Satellite Stereo Data Using SGM

  • Jang, Yeong Jae;Lee, Jae Wang;Oh, Jae Hong
    • 한국측량학회지
    • /
    • 제37권5호
    • /
    • pp.315-322
    • /
    • 2019
  • DSM (Digital Surface Model) is a digital representation of ground surface topography or terrain that is widely used for hydrology, slope analysis, and urban planning. Aerial photogrammetry and LiDAR (Light Detection And Ranging) are main technology for urban DSM generation but high-resolution satellite imagery is the only ingredient for remote inaccessible areas. Traditional automated DSM generation method is based on correlation-based methods but recent study shows that a modern pixelwise image matching method, SGM (Semi-Global Matching) can be an alternative. Therefore this study investigated the application of SGM for Kompsat satellite data of KARI (Korea Aerospace Research Institute). Firstly, the sensor modeling was carried out for precise ground-to-image computation, followed by the epipolar image resampling for efficient stereo processing. Secondly, SGM was applied using different parameterizations. The generated DSM was evaluated with a reference DSM generated by the first pulse returns of the LIDAR reference dataset.

SGM90d모델을 이용한 달 중력장 분포 및 특징 분석 (Analysis Distribution and Feature of Lunar Gravity Field Using SGM90d Model)

  • 황학;윤홍식;이동하
    • 한국측량학회지
    • /
    • 제27권2호
    • /
    • pp.129-138
    • /
    • 2009
  • 달 중력장은 달의 내부구조와 이분성 및 마그마 바다의 분화 진화과정을 이해하고, 더 나아가 달의 기원과 진화를 규명하기 위한 중요한 자료이다. 본 연구에서는 달 탐사의 역사와 달의 중력장 탐지 및 중력장모델의 발전과정을 고찰하였으며, 최근에 임무를 종료한 일본의 SELENE위성의 관측방식을 소개하고, SELENE위성의 궤도추적자료를 처리하여 개발된 달 중력장모델 SGM90d(SELENE Gravity Model)를 이용해 달 전체의 중력이상을 결정하였으며, 기존의 달 중력장 모델인 LP165P모델과 비교분석을 수행하였다. SGM90d를 분석해 본 결과, SELENE위성의 4중 도플러 관측방식은 달 뒷면의 중력장 직접 관측에 매우 효과적이었으며, 달 뒷면 중력장의 최초 결정은 달의 메스콘과 같은 중력이상의 상세한 분포를 확인하고 달의 이분성을 이해하는데 큰 도움이 되었다.

Antimony Surfactant Effect on p-GaN growth by Metal Organic Chemical Vapor Deposition (MOCVD)

  • 이영곤;;백광선;김봉준;김학준;이준기
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2010년도 춘계학술발표대회
    • /
    • pp.56.2-56.2
    • /
    • 2010
  • An improvement in the optical and structural properties of p-GaN was obtained by using antimony (Sb) as a surfactant during p-GaN growth. Two different growth temperatures of p-GaN such as $1030^{\circ}C$ and $900^{\circ}C$ were considered. Keeping the growth conditions for p-GaN constant, Sb was introduced during p-GaN growth while varying the [Sb]/([Ga]+[Mg]) flow ratio. [Sb]/([Ga]+[Mg]) flow ratio will be denoted as SGM ratio for convenience. SGM ratio of 0, 0.015 and 0.03% were considered for high temperature p-GaN growth. SGM ratio of 0, 0.005, 0.01 and 0.02% were considered for low temperature p-GaN growth. The analysis results suggest that using the optimum SGM ratio during p-GaN growth greatly improves the optical and structural properties of the p-GaN.

  • PDF

영상 분할 기반의 스테레오 매칭 기법을 이용한 DSM 생성 및 정확도 비교 (DSM Generation and Accuracy Comparison Using Stereo Matching Based on Image Segmentation)

  • 권원석
    • 대한원격탐사학회지
    • /
    • 제35권3호
    • /
    • pp.401-413
    • /
    • 2019
  • 본 연구의 목적은 50 cm급의 worldview-1 입체영상을 스테레오 매칭 알고리듬을 이용하여 DSM을 생성하고 정확도를 확인하고자 한다. DSM을 생성하기 위하여, 먼저, RPC 블록모델링을 수행하여 RPC 오차를 보정하였으며, 에피폴라 영상 생성 후 스테레오 매칭 알고리듬인 SGM을 이용하여 영상 매칭을 수행하였다. SGM에 사용된 COST는 CENSUS를 사용하였으며, COST 누적을 위하여 4방향과 8방향을 적용하였다. 생성된 DSM의 품질과 정확도를 확인하기 위하여 LiDAR DSM과 상용 SW로 생성한 DSM을 비교하였다. 실험 결과 지역에 따라 생성된 DSM의 수직정확도는 4방향의 COST 적용 시 RMSE 1.647 m ~ 3.689 m로 나타났으며, 8방향의 COST 적용 시 RMSE 1.550 m ~ 3.106 m로 나타났다.

Korean healthcare providers' attitude, knowledge, and behaviors regarding sexual orientation and gender identity: a cross-sectional survey

  • An, YunHui;Chung, ChaeWeon
    • 여성건강간호학회지
    • /
    • 제28권1호
    • /
    • pp.65-73
    • /
    • 2022
  • Purpose: This study investigated Korean healthcare providers' attitudes toward sexual and gender minority (SGM) persons and their knowledge and behavior concerning the collection of data on sexual orientation and gender identity (SO/GI). Methods: In this cross-sectional, descriptive study, 137 Korean healthcare providers were recruited through convenience sampling from internet communities for medical professionals. A structured questionnaire was created using Google Surveys. The Mann-Whitney U-test, Kruskal-Wallis test, and Spearman correlation analysis were performed. Results: The sample was mostly women (80.3%) and nurses (83.9%), who had overall negative attitudes toward SGM persons and low levels of knowledge and behavior with regard to the collection of patients' SO/GI data. Participants in their 20s, who were religious, and had clinical experiences in treating or providing nursing care for SGM persons had higher levels of knowledge about the collection of SO/GI data. The level of engagement in collecting SO/GI data was higher among women and in their 20s and 30s, unreligious participants, nurses, and those with less than 10 years of clinical experience. Positive attitudes toward SGM persons were associated with higher levels of knowledge, but lower levels of behavior, regarding the collection of SO/GI data. Conclusion: It is important to recognize the diversity of patients' SO/GI and to collect the corresponding information. To this end, it is necessary to develop and use a standardized SO/GI form. Healthcare providers should also receive education and training related to the health of SGM persons to resolve health problems that disproportionately affect SGM persons and related health disparities.

경사면의 잠김과 드러남에 대한 천수방정식의 수치 실험 (Numerical Experiments of the Shallow Water Equations to the Wetting and Drying on Sloping Beds)

  • 황승용
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2012년도 학술발표회
    • /
    • pp.581-581
    • /
    • 2012
  • 경사면의 잠김과 드러남(wetting and drying)에 대한 천수방정식의 수치 실험으로서 그 전선 근처에서 수심이 매우 작은 경우, 수심이 작을 때 2차 정확도를 위한 MUSCL의 적용 여부, 그리고 마찰 적용의 한계 수심 등에 대해 수심경사법(DGM)과 수면경사법(SGM)을 비교 검토하였다. 먼저, 포물선형 융기에서 정상상태의 기준해와 비교하고 하류에서 배수(drain)가 되는 경우를 상정하였다. 그리고 삼각형 바닥 턱을 지나는 댐 붕괴 흐름에 대한 실험의 결과와 비교하였다. 마지막으로 유사난수 발생에 의한 불규칙 바닥 구간을 지나는 가상 댐 붕괴 흐름에 대해 모의하였다. 정상 상태의 잠긴 바닥(wet bed)에 대해 정수 상태에서 SGM의 선평형성(well-balancedness)이 만족되었으나, 흐름이 상류와 사류일 때 각각 DGM과 SGM에서 유량 변동이 있음을 확인하였다. 드러난 바닥(dry bed)으로 흐름이 진행될 때 수심이 음의 값이 되지 않도록 잠김 드러남 전선근처에서 수심이 매우 작아지는 경우($<1{\times}10^{-6}m{\sim}1{\times}10^{-5}m$) 수심을 0으로 강제하고, n이 0.011과 0.04인 경우 수심이 각각 $1{\times}10^{-4}m$$1{\times}10^{-2}m$보다 작은 경우 마찰의 적용을 배제하는 것이 불가피하였다. SGM에 의한 MUSCL에서 수심이 $5{\times}10^{-5}m{\sim}5{\times}10^{-2}m$보다 작을 때 1차 정확도로 회귀가 불가피하였으나, DGM에서는 그와 같은 정확도의 훼손이 나타나지 않았다.

  • PDF

SGM_Korea 모형을 이용한 탄소세의 이산화탄소 배출저감 효과 분석 (A Study on the Effect of Carbon Tax using Second Generation Model for Korea)

  • 정현식;이성욱
    • 자원ㆍ환경경제연구
    • /
    • 제16권1호
    • /
    • pp.129-169
    • /
    • 2007
  • 이 논문에서는 한국이 2015년 흑은 2020년까지 1995년 혹은 2000년 수준으로 이산화탄소 배출량을 감축하기 위해 탄소세를 도입하는 경우의 효과를 SGM_Korea모형에 의거하여 예측해 보이고 있다. 이 논문의 주요 기여는 미국 지구변화연구소(JGCRI)가 개발한 SGM에 한국 부문의 데이터를 최근의 투입산출표(2000)와 최근의 에너지 수급표를 이용하여 최신화하고 그 예측력을 시험해 본 것에서 찾을 수 있다. 본 연구에서는 SGM_Korea (2000)를 이용하여 배출량 규제 및 탄소세 부과 시나리오에 따른 효과를 배출량 변화, 저감비용, GDP, 산업 생산 등에 대한 영향을 중심으로 살펴보았다. 한국이 2005년부터 배출량을 점진적으로 저감하기 시작하고 매년 1% 정도 에너지 효율의 향상을 가정할 경우 2015년까지 2000년 수준으로 배출량을 저감하기 위해 요구되는 탄소세 수준은 탄소톤당 약 US$500 정도가 될 것으로 보인다. 그러나 에너지 효율 개선이 없다면 탄소세에 의존하여 2000년 수준으로 배출량을 저감하는 것은 현실적으로 불가능해 보인다는 점에서 대체 에너지의 개발을 포함한 에너지 효율의 개선은 배출 저감 정책의 전제가 되지 않으면 안 될 것이다. 본 연구는 기후온난화 문제에 대해 국제적으로 검정된 CGE모형으로 예측된 비교 가능한 수치를 제시하였다는 점에서 다른 연구와 차별성을 가진다.

  • PDF