• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.154-161
• /
• 2001

We have treated polyester fabric with $CF_4,\;C_2F_6,\;SF_6\;and\;C_3F_6$ glow discharge plasmas to develop functional fabrics which preserve moisture transportation and water proofing nature. Modified properties were evaluated by water vapor permeation rate and breakthrough water pressure. The change of surface morphology was observed by SEM. Fiber interstice of the plasma treated fabric was calculated as $0.32{\mu}{\textrm}{m}$, and this value was sufficiently ideal as water repellent material. The moisture transportation of ${CF_4}-treated$ fabric was good as much as untreated fabric, and those of $C_2$F(sub)6-treated, SF(sub)6-treated fabrics were reduced by 1~3%, and that of ${C_3F_6}-treated$ fabric was reduced by 15%. The best treatment condition were 0.06 torr 120 seconds in $CF_4$, 0.05 torr 30 seconds in $SF_6$, 0.08~0.15 torr 90 seconds in $SF_6$ and 0.1 torr 45 seconds in $C_3F_6$ respectively. The grade of moisture transportation effect was $CF_4>C_2F_6>SF_6>>C_3F_6$, and water proofing effect was $C_2F_6{\approx}CF_4>C_3F_6>SF_6$. It was observed by SEM that the thin film was formed on the surface of the treated substrate by the fluorocarbon plasma treatment.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.07a
• /
• pp.110-113
• /
• 2001

ECR(electron cyclotron resonance) 플라즈마 식각 장비를 이용하여 SF$_{6}$/Ar과 Cl$_2$/Ar 플라즈마 가스에 대한 Platinum (이하 Pt) 박막의 식각 특성을 연구하였다. Pt 박막의 경우 Cl$_2$ 가스 혼합물에 대한 식각 특성은 많이 보고가 되어 왔으나 상대적으로 Fluorine 계열의 가스 혼합물에 의한 시각 연구는 미비하였다. 본 연구에서는 SF$_{6}$/Ar과 Cl$_2$/Ar 플라즈마 가스를 이용한 Pt 박막의 식각 특성을 비교 분석하고 각각의 가스와 Pt 박막과의 반응을 분석, 식각 특성을 개선하고자 하였다.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.19 no.1
• /
• pp.181-185
• /
• 2009

In this paper, the regenerated silk fibroin (SF)/hydroxypropyl methylcellulose (HPMC) blend filaments were prepared by wet spinning and the effect of HPMC concentration on the post drawing and morphology of blend filaments was elucidated. The result of maximum draw ratio indicated that the wet spinnability of wet spun SF / HPMC was improved with increasing HPMC concentration until 8% and remained constant after that concentration. The SEM observation revealed that the enhanced wet spinnability of blend filaments was strongly related to the morphological change by increasing HPMC concentration. Regardless of HPMC concentration, as SF content was reduced, the wet spinnability of blend film decreased resulting in reduced maximum draw ratio. It was also found by SEM observation that the cross section of blend filament deviated from circularity with an increase of HPMC content.

• Journal of English Language & Literature
• /
• v.54 no.4
• /
• pp.461-482
• /
• 2008

The science fiction was established as a typical genre of the American popular culture by the monumental releases of two series: Star Wars and Star Trek. Based on the popular science discourse, these two series have functioned as an ideological apparatus for re-appropriating Frontierism which reflects the essential values of American myth. Arguably, the SF genre owes its success mainly to the increasing popularity of science during the 1960s and 1970s, which was well represented in the space project of NASA. This power of popular science, however, tended to weaken in the 1990s as the public interest in NASA's project gradually decreased. "Deep Space Homer," an episode of The Simpson's fifth season, reflects the changing attitude of the American audience toward the new American hero created in the SF series of popular science in the previous popular culture.

• Corrosion Science and Technology
• /
• v.8 no.5
• /
• pp.171-176
• /
• 2009

The chloride threshold level (CTL) in mixed concrete containing, ordinary Portland cement (OPC), pulverized fuel ash (PFA) ground granulated blast furnace slag (GGBS), and silica fume (SF) is important for study on corrosion of reinforced concrete structures. The CTL is defined as a critical content of chloride at the steel depth of the steel which causes the breakdown of the passive film. The criterion of the CTL represented by total chloride content has been used due to convenience and practicality. In order to demonstrate a relationship between the CTL by total chloride content and the CTL by free chloride content, corrosion test and chloride binding capacity test were carried out. In corrosion test, Mortar specimens were cast using OPC, PFA, GGBS and SF, chlorides were admixed ranging 0.0, 0.2, 0.4, 0.8, 1.0, 1.5, 2.0, 2.5 and 3.0% by weight of binder. All specimens were cured 28 days, and then the corrosion rate was measured by the Tafel's extrapolation method. In chloride binding capacity, paste specimens were casting using OPC, PFA, GGBS and SF, chlorides were admixed ranging 0.1, 0.2, 0.3, 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0% by weight of binders. At 28days, solution mixed with the powder of ground specimens was used to measure binding capacity. All specimens of both experiments were wrapped in polythene film to avoid leaching out of chloride and hydroxyl ions. As a result, the CTL by total chloride content ranged from 0.36-1.44% by weight of binders and the CTL by free chloride content ranged from 0.14-0.96%. Accordingly, the difference was ranging, from 0.22 to 0.48% by weight of binder. The order of difference for binder is OPC > 10% SF > 30% PFA > 60% GGBS.

• Food Science and Preservation
• /
• v.16 no.6
• /
• pp.810-816
• /
• 2009

To identify effective food packaging compounds that could significantly affect the freshness of stored food, the efficiency and performance of porous polypropylene film containing mustard oil as a freshness maintenance ingredient was studied by GC-MS analysis and storage testing of bread. AITC (allyl-isothiocyanate)-emitting properties of films impregnated with mustard oil were evaluated by GC-MS. AITC was extracted from mustard oil, and used as a vapor as an effective antimicrobial agent. Films were prepared under four different conditions (the film types were abbreviated 25SF1, 25SF2, 50LF, and IAF) and the amounts of AITC inside vinyl packs constructed using the four films were measured. The results showed that the 25SF2 film (width 25 mm, length 20 cm) yielded a greater amount of AITC than did the 50LF film (width 50 mm, length 20 cm). We confirmed that the amount of gas emission showed better between layer and layer of the film side than the internal film. In storage testing using various films at $35^{\circ}C$ for 25 days, 25SF2 film provided excellent preservation of bread compared with 50LF film. This was in line with the fact that 25SF2 film yielded the highest amount of AITC. Emission capacities AITC of 2 cm film were measured using bottles various volumes (43 mL, 500 mL, 1000 mL) and both closed and open systems. The AITC content of the film in 43 mL bottle was much higher than that yielded by other films in the closed system, and AITC was rapidly emitted, with relatively low residual gas emission after 4 days in an open system. Mustard oil is a useful freshness maintenance ingredient hence, analysis of AITC emission kinetics from various films were helpful to develop films with optimal antimicrobial effects, and will allow application of such films in food packaging systems.

• Journal of the Korean Vacuum Society
• /
• v.21 no.4
• /
• pp.199-204
• /
• 2012

$SF_6$ gas is widely used for dry etching process of semiconductor and display fabrication process. But $SF_6$ gas is considered for typical greenhouse gas for global warming. So it is necessary to research relating to $SF_6$ alternatives reducing greenhouse effect in semiconductor and display. $C_3F_6$ gas is one of the promising candidates for it. We studied about etch characteristics by performing Reactive Ion Etching process of dry etching and reduced gas element exhausted on etching process using absorbent Zeolite 5A. $Si_3N_4$ thin film was deposited to 500 nm with Plasma Enhanced Chemical Vapor Deposition and we performed Reactive Ion Etching process after patterning through photolithography process. It was observed that the etch rate and the etched surface of $Si_3N_4$ thin film with Scanning Electron Microscope pictures. And we measured and compared the exhausted gas before and after the absorbent using Gas Chromatograph-Mass Spectrophotometry.

• The Journal of the Korea Contents Association
• /
• v.18 no.9
• /
• pp.498-509
• /
• 2018

involves philosophical perspectives that are different from other SF movies. This perspective was derived from that of Zecharia Sitchin, in which he tells the history of the earth and mankind from a very unique perspective. He claimed that the intelligent beings (according to Sitchen, we called them the gods) on this planet created mankind and brought them ancient civilizations. The purpose of this study is to analyze under the determination that a comparative analysis can be made between SF movies and an art genre, in the outlook that Sitchin's perspectives are under extraordinary attention of religious and academic circles and are assisting in solving many mysteries on earth with currently excavated archaeological evidences, to identify the factors of consensus between the message Sitchin wanted to convey and SF movies and find the historical perspectives of Sitchin in the cross-section between Sitchin and the narratives in .

• International Journal of Industrial Entomology and Biomaterials
• /
• v.22 no.2
• /
• pp.101-105
• /
• 2011

Transparency and insolubility of eardrum patch against exudates are important for otolaryngological surgery. The author prepared silk fibroin (SF) films with various concentrations and temperature and then examined solubility and conformation of SF films. SF films were transparent regardless of the various preparation conditions. Although most SF films are soluble in 1X PBS solution at $37^{\circ}C$ for 1 h, the SF film with 3.4% with $60^{\circ}C$ was insoluble. Scanning electron microscopy (SEM) showed that the SF films have solid and smooth surface. Fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) results showed that the conformation of SF films was influenced by the preparation conditions including SF concentration and casting temperature. In conclusion, SF membrane with transparence and insolubility against exudates could be considered as eardrum patch resources.

• Journal of the Korean Society of Costume
• /
• v.48
• /
• pp.133-150
• /
• 1999

In future what kind of costume do we wear\ulcorner We can guess it is in advance through movie. Movie is a comnipresent medium and a mode of expression that reflect a distintive feature of the times like fashion. In many case costume design which belongs to a special era is based on the historic costumes but ostume design for future movie depends on the creativity of costume designer and director. Therefore it is interesting to research how costume designer get his/her design concept for future ccostume in movie how he/hse express his/her design concept through his/her costume and can we convince the design comes true practically in future. In this study I analyze the costume design of masterpieces among SF Film: (Metropolis/1926) (2001: A Space Odyssey/1968) (Star Wars/1977) (Blade Runner/1982) (The 5th Element/1977) Because this study is analyzed not through the original article but just through movie it has some limitation in exact materials or color.